PC DETAILS:
-----------------------------------------------------------------
CPU: Intel i9 12900K Overclocked @ 5.5GHz
MOBO: ROG STRIX Z690-A GAMING WIFI D4
GPU: EVGA GeForce RTX 3090 FTW3 ULTRA
RAM: G.Skill Trident Z Royal Elite Series Silver 64GB - DDR4 4,266 ("B-Die")
PSU: EVGA SuperNOVA 1200 P3, 80 Plus Platinum 1200W
CASE: Lian Li O11 Dynamic XL ROG Certified Case
VR: Oculus Quest 3

STORAGE:
- 3x WD_BLACK 2TB (each) SN850 NVMe Internal Gaming SSD Solid State Drive - Gen4 PCIe
- 4x Western Digital 10TB (each) WD Black Performance Internal Hard Drive HDD

PCIE EXPANSION CARDS: (needed for Hifi Audio, VR & Peripherals)
- Sonnet Allegro USB 3.0 PCIe 4-Port (Dedicated for audio DAC output)
- Sonnet Allegro USB-C Gen 2 4-Port PCIe Card (Needed for VR & USB Hub connections)

COOLING & RGB:
- iCUE H150i ELITE CAPELLIX Liquid CPU Cooler — White
- iCUE ELITE CPU Cooler LCD Display Upgrade Kit (modded: body sanded and painted white)
- 9x iCUE QL120 RGB 120mm PWM White Fans Top/Bottom/Push-Push on Rad (all white cable re-sleeving)
- 3x iCUE QL140 RGB 140mm PWM White Fans (all white cable re-sleeving)
- 3x iCUE ML120 ELITE RGB 120mm PWM White Fans - Set in back of rad as "Pull" (all white cable re-sleeving)
- 4x Noctua NF-A6x25 PWM, Premium Quiet Fans (for 3D Printed HDD mod bay cage mod in back of case)
- Lian Li STRIMER Plus 24-PIN
- Lian Li STRIMER Plus Triple 8-PIN GPU RTX 30 Series
- 4x Lian Li LAN2 diffused LED Strips
- ARGB AIO Soft Tube Vest
- Rear Micro LED Bar behind LCD screen and mobo.
- Razer controlled LED Strip underneath the case for ambient light effects.
- V1-Tech Custom made EVGA themed RGB GPU Backplate and EVGA themed RGB Support Bracket

INTERNALS CONTROLS & HUBS:
- 3x Aquacomputer HUBBY7 Internal USB 2.0 Hubs
- 1x CORSAIR iCUE COMMANDER CORE (for AIO)
- 2x CORSAIR iCUE COMMANDER CORE XT (for the rest of the fans)
- 2x CORSAIR iCUE Lighting Node PRO (for additional RGB lighting controls)

MODS & MISC:
- ColdZero Custom front fan panel - 140mm clear acrylic with black trim to match case and top panel to hold a white dust mesh.
- Daewoo 1080P "White Bezel" LCD Screen, Vertical Mounted on back wall of case, running AIDA64 Extreme with custom sensor panels.
- CableMod E-Series Pro ModFlex Sleeved Cable Kit for EVGA (white)
- 4x CableMod ModFlex Sleeved SATA 3 Cable (White, 60cm)
- Lots of white wire loom cable sleeving to match the white look.
- Lots of white heat shrink tubing for my cables after that.
- Krylon ColorMaster Paint + Primer - Satin, White (for cooler LCD screen case and other spots)
- 3D Printed Custom white HDD cage external fan cage panels. Using 4X 60mm Notcua Fans. They average about 35c under load, with this mod.
- Lots of modded cable wires to convert argb devices into connections compatible with Corsair's LED commander cores and node pro inputs.

RGB CONTROL SOFTWARE:
- iCue (for main setup, everything is controllable through Corsair thanks to modded wires)
- Razer Synapse (for razer peripherals)
- SignalRGB (alternative to system control software which includes razer desktop devices)

----------------------------------------------------------------