Steam Workshop::Automation Essential Mods

[ Marked Incompatible ] "Old Nail" 1966 Brabham BT19 f1 car

Created by fillman86

it is as close to the original as I could get, but the cars changed shapes, so there's no 1 Brabham BT19. This won with not only the heaviest car, but also the least powerful, and that was because they applied good ol' knowhow. Now, automation doesn't expe...

[ Marked Incompatible ] (Almost [kinda of{maybe a bit}]) post 2020 grilles - 4.24

Created by Terrazi

If you like my work and are felling generous, consider supporting me on Ko-fi =D https://ko-fi.com/terrazicaio Some modern grilles inspired by modern cars... ok mainly inspired by the new 2021 f-150 grilles....

[ Marked Incompatible ] 00's Thirst

Created by Nolan the Fox

Hi! This is my third mod for Automation. It is the first car from the Prototype Mod Pack to be finished! I introduce to you: The 2000s Thirst. It's a Hummer body, with many variants, including an: - SUV - Army / Military Hummer - Cargo Van - Panel Van - Ra...

[ Marked Incompatible ] 05' Baguetti (UPDATED)

Created by [DBA] bis

Bugatti Veyron Body Mod (Updated) A Veyron body for all your egg shaped super car goodness. 1 variant with some body morphing capabilities This is the updated version of my attempt at the Veyron body. This is my first car body mod (and my first automation ...

[ Marked Incompatible ] 05' Mercy Coupe

Created by Kyorg

05' Mercedes Coupe body, 2.6m with 2 different variants. 2005 unlock year. Based on the AMG GT. 2dr Coupe 2dr Hardtop Cabrio For 4.24 Thanks to jeremyy#2233 for the GT-R Replica shown in the preview! P.S. This is my first mod body- it has plenty of feature...

[ Marked Incompatible ] [BETA] RB Interior panels

Created by Cyborg Silvia

WARNING: This mod will not remain live for 4.1 when 4.2 comes around. You have been warned. Been working on this over this year and its still not 100% done, Feedback is wanted and needed. This Mod contains the Following Interior Roof panels Interior Floor ...

[ Marked Incompatible ] Znopresk Zimca 1000

Created by Norman Vauxhall

A car body inspired by the Simca 1000 and Renault 8. Available in 2 dorr and 4 door version, front and rear engined. The car body will unlock in 1956 I'll rate it... 3,6 roentgen. Not great, not terrible. And it is not a Huracan! \o/ EDIT 13 Nov 2020 Groun...

[ Marked Incompatible ] Znopresk Aircooled Grill 4.24

Created by Norman Vauxhall

12 variants of the same simple grill made of rounded edge slots. 4 different sized (thin, base, big and square) by 3 different slantiness (straight, slanted, very slanted)...

[ Marked Incompatible ] Zimca 1100 for the 60s to 70s

Created by JohnDoe1974

Here is the Zimca 1100 It comes 1962 if there are any problems, please send it here with a picture: http://discourse.automationgame.com/t/misterl-s-mods/30488/74 my mods are free, but i put a lot of time and effort into my mods and would be happy to receiv...

[ Marked Incompatible ] Znopresk Zanda

Created by Norman Vauxhall

A body inspired by the 1980 Fiat Panda. There are 2 variants available, the normal 3 door and the van version. The mod is for the gamed update based on the 4.24 version of the Unreal engine. There are several morphs available. It is not perfect, but it's s...

[ Marked Incompatible ] Window cranks

Created by Arn38fr

Here are some window cranks to design the interior of your vehicles. Their design is inspired by the 1955 Citroën DS, the BMW 5 E12 series and Renault of 80s and 90s. Find them under Misc.Fixtures...

[ Marked Incompatible ] Warehouse Delta Photoscene (OB 4.24)

Created by MagikarpDrowned

It's a warehouse, called Delta because that's a cool name. Enjoy. No support offered, no requests taken, mod released as is....

[ Marked Incompatible ] Volvo Polestar (4.24)

Created by Maxbombe

Now with 4 door version plus a rear morph! Will only work with 4.24 version of the game. Unlocks in 2015, please report any issue with it! GIVE ME YOUR MONEY : https://en.tipeee.com/maxbombes-workshop...

[ Marked Incompatible ] Vertical Stabilizers [4.24]

Created by The Stig Is A Spy

A collection of vertical stabilizers and wings for top-tier performance vehicles. Please understand that for reasons outside of the mod creator's control, taillights and reverse lights on these fins won't work in BeamNG.drive. Indicators will light up, but...

[ Marked Incompatible ] Uruguayan Plates [4.24]

Created by elcochecitos

Uruguayan plates, made for MattD7f. Plate is the standard Mercosur layout, with the uruguayan flag and country name at the top blue stripe. Layout is SCG-3085, coming from the department of Montevideo. Enjoy them, and remember, "Mueren 3 personas y un boli...

[ Marked Incompatible ] Variety Plates Pack (4.24)

Created by ham

A buncha plates. Pack contains 5 variants of standard vanilla plates for each type. Plates included: Brazilian (Black) Brazilian (White) British Columbian Chinese (Hubei) Croatian Phillippines (2000) Phillippines (2006) Phillippines (2020) Polish (1976-200...

[ Marked Incompatible ] Venom's Community Rim Pack 1 (UPDATED FOR 4.24)

Created by Centurion_23

Commissioned by Quotex, picked by the community. Original Mod by Venom (send nudes) Updated for the UE4.24 version of the game...

[ Marked Incompatible ] Venom's Community Rim Pack 2 (UPDATED FOR 4.24)

Created by Centurion_23

Commissioned by Drift and Quotex, picked by the community. Original Mod by Venom (send nudes) Updated for the UE4.24 version of the game...

[ Marked Incompatible ] Venom's Community Rim Pack 3 (UPDATED FOR 4.24)

Created by Centurion_23

Commissioned by Drift, Quotex and ProfessorP3PP3R Original Mod by Venom (send nudes) Updated for the UE4.24 version of the game...

[ Marked Incompatible ] taillight for the classics

Created by JohnDoe1974

for the 4.24 if there are any problems, please send it here with a picture: http://discourse.automationgame.com/t/misterl-s-mods/30488/74 my mods are free, but i put a lot of time and effort into my mods and would be happy to receive a small donation https...

[ Marked Incompatible ] Swoopy 10s Minivan SWB

Created by Kyorg

08' Toyota MPV body, 2.6m with 2 different variants. 2008 unlock year. Based on the Toyota Sienna. 5dr MPV 5dr Van For 4.24 Body commissioned by SyberRacer LWB: https://steamcommunity.com/sharedfiles/filedetails/?id=2580284729 MWB: https://...

[ Marked Incompatible ] Swart's "Not a SAAB grill."

Created by Swartkin

Hello! And it's me again, this time i'm here with another grill mod! This is a SAAB 9000 grill with 3 variants: Saab Grill Barebones Saab Grill Medium Saab Grill FULL Thanks to .HueWave for the idea! This is quite a complex grill to make and it was a fun c...

[ Marked Incompatible ] Swart's "Not a Rocket Bunny Grill"

Created by Swartkin

Beware, this mod has a few visual bugs on the grill's lips, it has taken me a lot of time, and with all of my efforts and hours of play testing and model fixes, i still couldn't get it perfect. If i find a way to fix some of the lips bugs i'll fix it. heya...

[ Marked Incompatible ] Swart's "Modern Modular Headlights"

Created by Swartkin

Heya! Welcome! This mod was supposed to be a continuation of my Miata grill by adding a modular modern miata headlight, but it was way too barebones, so i made 4 of them with more to come! Credits for the Art: SoloApollo97 Contains: Mazda Miata 2017 Modula...

[ Marked Incompatible ] Swart's "Simple Door Panels"

Created by Swartkin

Mod localization: Misc.Fixture Hey, Welcome to my mod! This is my attempt at making the creation of door panels as simple, creative and fast as possible! Are you tired of messing with 3D fixtures? Using reverse bumpers is way to low quality? So i can fix y...

[ Marked Incompatible ] Swedish Family Sedan/Hypercar Body

Created by TheScepticBlock

This is a body based on the Koenigsegg Gemera. Even though it's technically a hypercar I've set it to be a sedan because it's a four seat vehicle than can fit your average family of four. Unlocks in 2017 Features: - 3.0 Meter wheelbase - Mid & front engine...

[ Marked Incompatible ] Swoopy 10s Minivan LWB

Created by Kyorg

08' Toyota MPV body, 3.0m with 2 different variants. 2008 unlock year. Based on the Toyota Sienna. 5dr MPV 5dr Van For 4.24 Body commissioned by SyberRacer MWB: https://steamcommunity.com/sharedfiles/filedetails/?id=2580287042 SWB: https://...

[ Marked Incompatible ] 1948-1957 f1 race car body open wheeler

Created by fillman86

oh boy this one is fun. It's quite a short wheelbase, and very narrow, but you need to fix that with offset (it's just the way I set the body up deliberately) -it's for the 1950 grand prix, based loosely off of what was used that year. Though it's availabl...

[ Marked Incompatible ] 10s Vivano Van/MPV (UE4.24)

Created by GrowfyBruce

2010s van body with rear-load, side-door load, and passenger variants....

[ Marked Incompatible ] 10s Prototype [4.24]

Created by The Stig Is A Spy

My 2010s LMP body, updated for the 4.24 open beta. As with the previous version: - You may choose to use a larger engine than the body is built for, but doing so may result in it clipping through the body. - Only use a carbon-fibre monocoque chassis; other...

[ Marked Incompatible ] 10s Kei Wagon II [4.24]

Created by The Stig Is A Spy

Please read the description before subscribing. Background You might be asking what the purpose of this mod is when there already exists a Suzuki Wagon R-based kei body. Well, this one was intended as a spiritual successor to said kei body before it was up...

[ Marked Incompatible ] 1955 Pickuptruck

Created by volltreffer1

it is the second part of a hopefully very long modding career at this workshop. I hope you like this mod and you can implement many creative ideas with it....

[ Marked Incompatible ] 60's Roof : Just the 62 Lincoln Roof

Created by Maxbombe

You'll find it in Misc fixtures, better used with 3D placement....

[ Marked Incompatible ] 60Â´s European Body with 240cm wheelbase

Created by JohnDoe1974

Here is my body again for the 4.24 version of the game if there are any problems, please send it here with a picture: http://discourse.automationgame.com/t/misterl-s-mods/30488/74 my mods are free, but i put a lot of time and effort into my mods and would ...

[ Marked Incompatible ] 60´s European Body with 270cm wheelbase

Created by JohnDoe1974

Here is my body again for the 4.24 version of the game if there are any problems, please send it here with a picture: http://discourse.automationgame.com/t/misterl-s-mods/30488/74 my mods are free, but i put a lot of time and effort into my mods and would ...

[ Marked Incompatible ] 50s to 70s Radio

Created by JohnDoe1974

Found in an old FBX-Folder have fun with it...

[ Marked Incompatible ] 50s body with 220cm wheelbase

Created by JohnDoe1974

Here is the smallest of my 50s body. it is a shortened version of the 250cm body if there are any problems, please send it here with a picture: http://discourse.automationgame.com/t/misterl-s-mods/30488/74 my mods are free, but i put a lot of time...

[ Marked Incompatible ] 50's roof : Mod test (4.24)

Created by Maxbombe

Just a test concept for modular roofs. I forgot to precise that it works through 3D movement, so it will only work in 4.24. ...

[ Marked Incompatible ] 60s body with 220cm wheelbase

Created by JohnDoe1974

This body based on the BMW E3/E9 from the 60s. if there are any problems, please send it here with a picture: http://discourse.automationgame.com/t/misterl-s-mods/30488/74 my mods are free, but i put a lot of time and effort into my mods and would be happy...

[ Marked Incompatible ] 87' Fatale

Created by Kyorg

87' Mitsubishi Coupe body, 2.5m and 2.8m with 2 variants. 1987 unlock year. Based on the Mitsubishi FTO. 2dr Coupe 4dr Sedan For 4.24 Body commissioned by sayo P.S. Thanks also to sayo for the excellent FTO replica pictured above...

[ Marked Incompatible ] 80's Espresso (4.24)

Created by mart1n2005

update of the espresso mod by "send_nudes" 4 variants: shooting brake quad coupe hardtop convertible soft top convertible 2.1m and 2,4m wheelbase variants of both ...

[ Marked Incompatible ] 78's TopKek (truck bodies and fixtures)

Created by Gizmo_Props

FINALLY, after way too long the TopKek truck mod is ready! Please concider supporting me on ko-fi: https://ko-fi.com/gizmo_props This mod contains many familly of trucks in differents wheelbases and 2 sizes and truck fixtures you can see a detailed list of...

[ Marked Incompatible ] 90's freedom (ue4.24)

Created by mart1n2005

unreal engine 4.24 port of "send nude's" 90's freedom body 2 wheelbase lengths, 2.0m and 2.8m also i've given the car some more cd as the drag was far too low before. *edit* window transparency works correctly now...

[ Marked Incompatible ] 70's Citroënish thing is also back with lots of variants!

Created by Maxbombe

Same IDs, retro compatible. More versatile, much more fun! Unlocks in 1968....

[ Marked Incompatible ] 60s european car with 240cm wheelbase

Created by JohnDoe1974

Here is my body again for the 4.24 version of the game if there are any problems, please send it here with a picture: http://discourse.automationgame.com/t/misterl-s-mods/30488/74 my mods are free, but i put a lot of time and effort into my mods and would ...

[ Marked Incompatible ] 60s body with 300cm wheelbase

Created by JohnDoe1974

This body based on the BMW E3/E9 from the 60s. if there are any problems, please send it here with a picture: http://discourse.automationgame.com/t/misterl-s-mods/30488/74 my mods are free, but i put a lot of time and effort into my mods and would be happy...

[ Marked Incompatible ] Windscreen Washer Nozzles (4.24)

Created by Terrazi

If you like my work and are felling generous, consider supporting me on Ko-fi =D https://ko-fi.com/terrazicaio I was too slow and someone released a mod for that before me, oh well XD Self-explanatory title, its a collection of nozzles. They are pretty low...

[ Marked Incompatible ] V6, V8 Badge

Created by Pepsi Max

The badge was copied from Citroen Xantia (V6 Only) The Mod contains: -V6 Badge -V8 Badge Doesn't work properly in Beam but still visable...

[ Marked Incompatible ] 2 Sport badges

Created by KakonaSon

this mod contains 2 sport badges one in red and the other is in chrome...

[ Marked Incompatible ] 1990's lmp car

Created by mart1n2005

1990's lmp body in 3 wheelbases. 2.1m 2.5m 2.8m due to the new chassis designs you need to hide the chassis as it clips into the wheel arches, also use pushrod suspension only...

[ Marked Incompatible ] 1970's lav

Created by mart1n2005

port of "send nude's" 70's chonker body...

[ Marked Incompatible ] 1962 Lotus 25-like f1 Monocoque car body

Created by fillman86

the car came in different variations, and this is very similar to all of them. The body is not perfect, and there's not morphing (because I'm too lazy to learn it). if you want to see the first video where it's used with TwinTurBros, here's a link - https://...

[ Marked Incompatible ] 10s Kei Wagon (UE4.24)

Created by GrowfyBruce

Based upon a popular Japanese kei car's late 2010s styling....

[ Marked Incompatible ] 10s Flyer [4.24]

Created by The Stig Is A Spy

Background A midship kei sports car body modelled after the Honda S660. Usage Notes The unlock year for all variants is 2011. There are two wheelbases available (2.28 and 2.62 m), each with coupe, hardtop, targa, and Neo Classic targa variants. Thanks to s...

[ Marked Incompatible ] 10s Betelgeuse [4.24]

Created by The Stig Is A Spy

Background Due to Automation's lack of modern MPVs with short hoods, I made this Toyota Alphard body over the course of almost three months. The body, along with its ute variant, unlocks in 2009. Usage Notes The unlock year for all variants is 2009. All va...

[ Marked Incompatible ] 1980's caddy

Created by mart1n2005

unreal engine 4.24 port of the caddy mod. includes open and closed variants and a small kei truck the engine and chassis need hiding ideally on the 2 caddy variants as they show through the body...

[ Marked Incompatible ] 1978 Semitruck 4_24

Created by volltreffer1

Please be a little indulgent, this is my first mod, I hope you like it. If everything went well, the truck should now be rounded. ...

[ Marked Incompatible ] 90s Blobby American compact car

Created by partario

4 door sedan and 5 door wagon variants....

[ Marked Incompatible ] 90s Compact van body

Created by partario

A reasonably small European van. Cargo and passenger versions....

[ Marked Incompatible ] 90s Flower Sedan

Created by Overev

The '90s Flower Sedan is based on the 1992-1997 Toyota Corolla. I was in desperate need of a Japanese 90s body, so i hope this will help. Many apologies that it looks jank and rushed, this is my first ever 3D model. This mod contains: 4 Door Sedan 2 Door C...

[ Marked Incompatible ] 90s Russian compact car body

Created by partario

A simple car body. Comes in 4 door sedan, 2 door coupe, 5 door hatchback and wagon variants. Additional variants may follow....

[ Marked Incompatible ] 90sCoupe Raised Fender

Created by Overev

Simple mod, just moved a handful of vertices to make it lower. Morphs are broken due to it being ripped out of the SDK game. Tried to fix but no luck ¯\_(ツ)_/¯ Works only with Space-frame Double Wishbone Front, Rear suspension can be anything....

[ Marked Incompatible ] 91' Vendetta Coupe

Created by Kyorg

91' Chevrolet Coupe body, 2.6m with 1 variant. 1991 unlock year. Based on the C5 and C6 Corvette. 2dr Coupe For 4.24 Body commissioned by kaybee...

[ Marked Incompatible ] A simple Taillight

Created by JohnDoe1974

Here is another mod that I converted for 4.24. i also added a few variations. if there are any problems, please send it here with a picture: http://discourse.automationgame.com/t/misterl-s-mods/30488/74 my mods are free, but i put a lot of time and effort ...

[ Marked Incompatible ] 4.24 Customisable Speedometers + Needle + Odometers (Pack 1)

Created by ZilverBlade

Speedometers for those that can't be bothered to make them themselves. Here I include 17 gauges, of which include 11 KMH gauges (8 unique speeds), and 6 MPH gauges (all unique), a fancier needle than the tachometer mod, AND 2 odometers (analogue and digita...

[ Marked Incompatible ] CSR 128 Pizza decals

Created by Maxbombe

A request from Mikonp7 for CSR 128. Actual decal pictures not from!...

[ Marked Incompatible ] Clear Rim (4.24)

Created by Terrazi

If you like my work and are felling generous, consider supporting me on Ko-fi =D https://ko-fi.com/terrazicaio I present you the Terrazi Hachura (totally not a Forgiato Radurra) Center cap texture provided by discord user "Quotex" This rim has some issues ...

[ Marked Incompatible ] Classic London Black Cab (UE4.24)

Created by GrowfyBruce

The classic black cab that served London for 40 years: 1958-1997....

[ Marked Incompatible ] Citroën XM 1989

Created by Maxbombe

This was pain to make. Not the cleanest of my mods but still very versatile. Perfect for any kind of 80's/90's sheananigans. Unlocks in 1984. Please report any issue with it! Tips for the me : https://en.tipeee.com/maxbombes-workshop...

[ Marked Incompatible ] Center Brake Lights (Legacy 4.24)

Created by GearheadLydia

A set of ten center high mount brake lights based on Scoop03 from the base game. Something simple I made to fill a need. May be updated with more designs later, as I finish them. Original 4.21 version: https://steamcommunity.com/sharedfiles/filedetails/?id...

[ Marked Incompatible ] CB's Buttresses 4.24

Created by Chickenbiscuit

Buttresses ready to take on the new world of UE4.24...

[ Marked Incompatible ] CaspitaSuper body (4.24)

Created by Aruna

Late 80s/90s Super/Hypercar body with many different variants. 1985 year. Based upon Jiotto Caspita. Standard (Gullwing) Non Gullwing (Windows don't go on roof) Spyder Hard Top Spyder Soft Top V1 Spyder Soft Top V2 (No rear window) Targa Top Targa For 4.24...

[ Marked Incompatible ] Bumper Bar Trim Revamp (4.24)

Created by Terrazi

If you like my work and are felling generous, consider supporting me on Ko-fi =D https://ko-fi.com/terrazicaio Giving some love to the already loved bumper bar trim =) What started as a small addition of extra pieces, now turned into more than 90 pieces of...

Bumper and or window stickers

Created by stm316

A collection of stickers inspired by (and copied from) real world examples. Expect more as time goes on....

[ Marked Incompatible ] 4.24 Customisable Tachometers + Needle (Pack 1)

Created by ZilverBlade

Tachometers for those that can't be bothered to make them themselves. Here I include 6000, 9000, 12000rpm (and also now 4000rpm!) gauges, with a basic needle. You can customise the redline in steps of 1000, (and because of that, the 12000rpm variant has 16...

[ Marked Incompatible ] Customizable exhaust tips (4.24)

Created by Terrazi

If you like my work and are felling generous, consider supporting me on Ko-fi =D https://ko-fi.com/terrazicaio This mod is a compilation of exhaust tips fixtures, with a nice catch: As the tittle says, the tips are customizable, you can use pretty much use...

[ Marked Incompatible ] Cyberville V2

Created by Maxbombe

Big update for Cyberville, but also a new standalone, in case you still want to use V1. Comes with more details, a somehow slightly better performances. V1 : https://steamcommunity.com/sharedfiles/filedetails/?id=2233513357...

[ Marked Incompatible ] Drift's mod pack (4.24)

Created by mart1n2005

port of "send nudes" drif pack 1 to 4.24 includes - 1 European Police Lightbar (1990's) - 1 German Taxi sign in 3 Variations - 4 Mirrors for Pickups and Trucks - 1 Taillight in 2 Variations - 1 Fender Indicator, (can also be used for Orange Truck lights) -...

[ Marked Incompatible ] Door Handles And Some Locks (DHASL) I (4.24)

Created by Terrazi

If you like my work and are felling generous, consider supporting me on Ko-fi =D https://ko-fi.com/terrazicaio As the (long and self-explanatory) tittle says, this mod comes with a handy collection of door handles and some locks as a bonus. Any resemblance...

[ Marked Incompatible ] Fender flares

Created by matt

Here are some fender flares, one type for now, but different shapes to fit various car bodies. v1.01 added some without bolt holes...

[ Marked Incompatible ] Fans and Old Wings 4.24

Created by Simmer22

An update of three of my older mods rolled into one svelte package. There was an issue that kept me from updating them with my other mods, but now they're here. Four touring car wings based around the early 2000s, with three different styles of posts and o...

[ Marked Incompatible ] Factory Photoscene (OB 4.24)

Created by MagikarpDrowned

This is a photoscene of a factory. It's large on disk, so please make sure you have at least 3GB free. Runs just fine on my system. No support offered, no requests open. Released as is. Enjoy!...

[ Marked Incompatible ] F1 Front Wing+Nose+Bargeboards

Created by Luca Bagnoli

Sadly preview image doesn't work so you will find the fixture in "Wings" as a "loading animation"...

[ Marked Incompatible ] first mid engine f1 from 1958

Created by fillman86

this is based on the Cooper Climax T51 f1 car. The first car in the f1 championship to use mid engine. They were a small indie british team, and Cooper is the same person who made the Mini Cooper. There was no 1 variant of this car, so this is kind of an a...

[ Marked Incompatible ] Assorted mirrors 4.24

Created by thecarlover

Two mirror designs, one vintage and one for the future More to be added down the line....

[ Marked Incompatible ] Aruna's Wire Wheels (4.24)

Created by Aruna

A collection of 10 wire wheels I've created, based around wheels made by Borrani, Cadillac, Daytons, Jaguar, and more. Hope you enjoy them! Please see the updated 4.27 version in my workshop!...

[ Marked Incompatible ] Aruna's Wheel Pack 9 (4.24)

Created by Aruna

This wheel pack includes 15 new wheels (29 wheels including variants) with quite a range of choice!...

[ Marked Incompatible ] Aruna's Wheel Pack 8 (4.24)

Created by Aruna

This wheel pack includes 20 new wheels (34 including variants) ranging from almost all eras! Thank you to Corsica for the images of my wheels used on their builds! Please see the updated 4.27 version in my workshop!...

[ Marked Incompatible ] Aruna's Wheel Pack 7 (4.24)

Created by Aruna

This wheel pack includes 13 new wheels (18 including variants) ranging from 60's all the way to the 2020s Credit to @CorsicaUnknown for the pictures using my latest wheels in this pack! 06/01/21: Added a variant to wheel without small bulges Please see the...

[ Marked Incompatible ] Bentley Arnage body (4.24)

Created by Maxbombe

I finally release it. It's not perfect, and the windshield morph is bugged (I can't fix it). But for the rest, it works! Will only work on the 4.24 version of the game. Unlocks in 1990, please report any issue with it! PS : YES I DO KNOW IT SCRAPS IN BEAMN...

[ Marked Incompatible ] Benelli 828U Over/Under Shotgun by TGRRRR

Created by Deltariuns

In case the title isn't clear enough, this model was made by TGRRRR. It's under a CC BY 4.0 Attribution International license, which is why I'm allowed to upload this in the first place. You can find the original model here: https://sketchfab.com/3d-models...

[ Marked Incompatible ] Bumpers for the classics 4.24

Created by JohnDoe1974

I made a few bumpers with and without rubberstrip. The bars are extra and free to place. theres a part with a cut out for the numberplate with work together with the bumperparts. There are also matching bumpers for the side. Look for my mod with matching i...

[ Marked Incompatible ] A transporter for the early years with a short wheelbase

Created by JohnDoe1974

Here is the short Transit based van. There are a total of 9 variants, the normal cars with tailgate or rear doors and two flatbeds and a pickup version. I have set the year of publication for the campaign to 1958. if there are any problems, please send it ...

[ Marked Incompatible ] Above Earth

Created by Maxbombe

Also known as "Every automation photoscene ever, but from high above."...

[ Marked Incompatible ] Alfa Roméo Carabo concept by Bertone (4.24)

Created by Maxbombe

Updated the Carabo mod. This mod will only work with 4.24. Unlocks in 1968. Please report any issue with it! Tips for the me : https://en.tipeee.com/maxbombes-workshop...

[ Marked Incompatible ] Alpine A110 Body - OpenBeta (UE4.24)

Created by Bubbleverse

-V1: Finally Out ;) -V1.1: Fixture problems finally solved ! :D...

[ Marked Incompatible ] Alpine A310 Body - OpenBeta (UE4.24)

Created by Bubbleverse

Alpine A310 Body ! Enjoy ! Can't modify shapes for now but I'll work on it ;) Logs: -V1.1: -Most of fixtures problems gone, but still got problems with headlight. Stay tuned, will fix it in the next update -V1.2: Everything working properly ! Next stop: Sh...

[ Marked Incompatible ] Aruna's Wheel Pack 6 (4.24)

Created by Aruna

This wheel pack includes 12 new wheels ranging from racing, aftermarket, custom, stock and economy! As well as this the wheels that were not previously in packs: C345 Ultralight, Texan Shotgun, Vision Morgana, and Fenton Gyro are within this pack. Please s...

[ Marked Incompatible ] Aruna's Wheel Pack 5 (4.24)

Created by Aruna

In this wheel pack you'll find white wall tyres! (Including all the wire wheels with now white walls.) As well as one special racing tyre wheel with Arunahart text on the side-wall overlay. As well as many other OEM and aftermarket as well as originals by ...

[ Marked Incompatible ] Aruna's Wheel Pack 4 (4.24)

Created by Aruna

This wheel pack includes a variety from truck wheels, police interceptor steelies, luxury wheels. Also includes two new Arunahart wheels! O06 and O07, both available without logo. Please see the updated 4.27 version in my workshop!...

[ Marked Incompatible ] Aruna's Wheel Pack 2 (4.24)

Created by Aruna

A collection of 11 different wheels (17 including variants). Some wheels are replicas from brands such as Asanti, Lexani, Lowenhart, Junction Produce/OZ, Sevenk, and also included are some new original Aruna Customs! (O02 Solar Spikes, O03 Volcanic Turbine...

[ Marked Incompatible ] Aruna's Wheel Pack 1 (4.24)

Created by Aruna

A collection of 11 wheels I've created recently. 9 replicas and 1 set of originals imagined by myself in steel wheel backing and alloy variants! Please see the updated 4.27 version in my workshop!...

[ Marked Incompatible ] Another summer plastic 60s

Created by matt

After the first summer plastic body I decided that it needs some competition... So here is another summer plastic... 3 variants: 1.4m, 2m, 2.4m Shows in year 1963 Mid and rear engine placement Chassis sticking out on some places... Parts in mod: Parts for ...

[ Marked Incompatible ] Aruna's Wheel Pack 3 (4.24)

Created by Aruna

The next wheel pack is finally here! It includes a new Arunahart Original: O05 and throwback to the previous ones but now including logo centre caps! There is a range of classic and modern tuner wheels to armoured car and truck steelies too. Please see the...

[ Marked Incompatible ] Ultimate One '10s (4.24)

Created by Aruna

Ultimate One 10’s body (2.8m) with 6 different variants. 2010 year. Based upon Toyota FT-1. Coupe (C) Coupe Targa (CT) Spyder Soft top (SS) Spyder Hard top (SH) Mid Engined (MR) Mid Engined Targa (MRT) For 4.24 Credits to Secrane & Maxbombe for their aweso...

[ Marked Incompatible ] TSIAS's Racing Fixture Pack [4.24]

Created by The Stig Is A Spy

Background A work-in-progress collection of detail-oriented fixtures for race cars. I plan to add more fixtures every now and then. Usage Notes All of these fixtures—with the exception of exhausts and air jack cylinders—do not add weight in Beam. For great...

[ Marked Incompatible ] Trueno (3D font) - 4.24

Created by Terrazi

If you like my work and are felling generous, consider supporting me on Ko-fi =D https://ko-fi.com/terrazicaio Ever wanted to change color of you naming badges? Also wanted to place them on top of bar trims? Say no more, i got you covered. All characters i...

[ Marked Incompatible ] Trailers

Created by Gizmo_Props

If you like my stuff, please consider supporting me on ko-fi!: https://ko-fi.com/gizmo_props the trailers unlock in 68 They are really hard to attach on trucks in beam, since i cannot have working trailer legs, that is to be expected to avoid breaking whee...

[ Marked Incompatible ] [LEGACY UE4.24] Titanium Exhaust Tips

Created by Endfinity

WARNING: This mod does not work with the latest version of the game Introducing Titanium Tips! Fit your prime ricer with the newest aftermarket titanium exhaust tips! Pick one of 2 variants! The singleton https://i.imgur.com/t3JqQl8.png The twingleton http...

[ Marked Incompatible ] TIMS Rim Pack 1 (4.24)

Created by TIMS

This pack includes 16 rims that ranges from OEM to JDM & Euro aftermarket rims. Rims in this pack replicate the following: • Apio Wildboar X • Borbet A • Borbet CC • Crimson Club Linea L566 • Heritage Wheel KOKORO MonoC • RAYS Gram Lights 57Transcend • Spe...

[ Marked Incompatible ] BeamNG's Pigeon Body

Created by fillman86

why make this? boredom.... this is a pretty straight forward body, it's under utility, and 1980. if you want to see the video where this mod was made, then maybe check this out please :) https://youtu.be/8DhZjHJRzOk...

[ Marked Incompatible ] [LEGACY UE4.24] BeamNG Screens [READ DESCRIPTION]

Created by Endfinity

WARNING: This mod does not work with the latest version of the game Export your cars to BeamNG with working screens! This mod is a part of the AutoBeam Screens Patcher The screens will NOT work by themselves, the patcher has to be applied. Read more about ...

[ Marked Incompatible ] Basic Side Exhausts 4.24

Created by Chickenbiscuit

Side pipes updated to UE4.24...

[ Marked Incompatible ] auxiliary lights

Created by accent

No pickup or SUV is complete without some extra lights. Edit: added flat mounted variants. Edit 2: added variants with covers (texture by Quotex). Note that if you mirror them, the texture is mirrored also, so place the other side separately....

[ Marked Incompatible ] Autoverse Roundels Pack

Created by variationofvariables

A pack of roundels for the in-game Automation countries, made by yours truly. These aren't officially the ones used by the countries in-game (likely because the game literally doesn't mention their air forces at all) but hey, it works i dont know what you'...

[ Marked Incompatible ] Animal Badges (4.24)

Created by Terrazi

If you like my work and are felling generous, consider supporting me on Ko-fi =D https://ko-fi.com/terrazicaio badges based on animals. They are all originals and entirely made by me (some was based on coments). This is kinda of my "neglected child", I had...

[ Marked Incompatible ] American Police Decals

Created by Tato_Vevo

Some American police decals because I'm tired of waiting for someone else to make them....

[ Marked Incompatible ] American Dream '00s (4.24)

Created by Aruna

American Dream 00s body (2.7m) with 10 different variants. 1995 year. Based upon Saleen S7. Coupe (2dr) {N} Coupe Inset (2dr) {I} Coupe Targa (2dr) {NT} Coupe Inset Targa (2dr) {IT} Saloon (4dr) {4dr} Saloon Landaulet Hard (4dr) {4drH} Saloon Landaulet Sof...

[ Marked Incompatible ] Citroën BX body (4.24)

Created by Maxbombe

Updated the old bx mod for open beta. This mod will only work with 4.24. Please report any issue with it! ...

[ Marked Incompatible ] Chevrolet Malibu 1978 4.24

Created by Maxbombe

Yes it's a resized Caprice. Pick-up truck and wagon still in the work. Unlocks in 1974....

[ Marked Incompatible ] Chevrolet Caprice Classique 1977 4.24

Created by Maxbombe

Comes in a plethora of variants, sedan, coupe, wagon, hatch, three door hatch and pick-up truck. Have fun! Last picture shows the Serpent Spur, Gran Spur and Police Spur from Secrane. Unlocks in 1974....

[ Marked Incompatible ] Courageux Motors badges

Created by mart1n2005

badge files for one of my lore companies...

[ Marked Incompatible ] Community Rim Pack 4 (4.24)

Created by Aruna

Continuation of the Community Rim Pack! Commissioned by Quotex, ProfessorP3PP3R, Nekoi/Drift, Mat and Rafał. See more about it here: http://discourse.automationgame.com/t/the-automation-community-rim-pack-thread-patrons-wanted/31168 (Cars featured by Secra...

[ Marked Incompatible ] Boiled Baguette Body

Created by TheScepticBlock

This is my first attempt at an automation mod that's loosely based on the Bugatti Bolide. I'm extremely new to 3d modelling and modding Automation as you can see with some areas with weird looking geometry on the body. Features: - 2 Variants. The base vers...

[ Marked Incompatible ] Dashboard Warnings

Created by Est_Nbmstr

THIS IS UNDER THE "BADGES" CATEGORY This is a pack of dashboard warning lights/icons you may find on various buttons. But if you want to be special, feel free to do something else, use them as a badge, spell something with them, I cannot stop you, nobody c...

[ Marked Incompatible ] Daimyo '80s (4.24)

Created by Aruna

Daimyo 80’s body (2.7m) with 8 different variants. 1980 year. Based upon Toyota Land Cruiser J70. SUV (5dr) SUV (3dr) Troop Carrier (3dr) Troop Carrier Soft Top (3dr) Utility Single (2dr) Utility Double (4dr) SUV Panel Van (5dr) SUV Panel Van (3dr) For 4.2...

[ Marked Incompatible ] Cyclist Decal (OB 4.24)

Created by MagikarpDrowned

Oh no he's here now oh no oh no oh no...

[ Marked Incompatible ] The wedge is back! (4.24)

Created by Maxbombe

I finally managed to resurrect it! After dozens of try,it finally cooked. The IDs are matching, you should be able to open your old car with no isses, the morphs are also the exacty same as the old version. Nothing (should've) changed....

[ Marked Incompatible ] The Universal Wedge body (4.24)

Created by Maxbombe

Here is a wedge body allowing you make all kind of wedge. From the 70's to the 80's. This mod will only work with automation on unreal 4.24. Unlocks in 1970. This mod offers a lot of morphs. This body will bend to your will. Please report any issue with it...

[ Marked Incompatible ] The small friend

Created by JohnDoe1974

Another body for the good old time. It comes 1967 If you want to make a mid-engine-monster you have to select the mid-engine body first, NO OTHER VERSION!!! If you choose a normal version and switch to the mid-engine, no engine will fit into it. if there a...

[ Marked Incompatible ] The SM is back too!

Created by Maxbombe

Works like it used to, morphs, IDs and everything!...

[ Marked Incompatible ] The modern GT uhhh, thing.

Created by Maxbombe

This is GT style car. There are a lot of morphs. Unlocks in 2015. morphs are good, you should eat more of them....

[ Marked Incompatible ] The A112 Body for 4.24

Created by JohnDoe1974

Her is the A112. I´ve added two new versions. If you want to make a mid-engine-monster you have to select the mid-engine body first, NO OTHER VERSION!!! If you choose a normal version and switch to the mid-engine, no engine will fit into it. if there are a...

[ Marked Incompatible ] The 80's interior mod V1.0 (Open beta)

Created by Maxbombe

Fuck it. Who decided the 80's ever ended? Now create your own 80's car dashboards with a multitude of modular parts! On gauges parts : most of them have both km/h and mph available, by default mph is colored black so just switch material on it in the fixtu...

[ Marked Incompatible ] Drift's mod pack 2 (4.24)

Created by mart1n2005

The second drift mod pack, previously unreleased. Created by "send_nudes" converted to run on unreal 4.24 Includes: 2 bash bars, one conforming and one non conforming of each 1 small plastic mirror 1 large truck chrome mirror full set of taxi decals 3 taxi...

[ Marked Incompatible ] Drift's Tire and Suspension Fixtures

Created by Dr.Drift

This Pack introduces modular Tires, Rims and Suspension Parts as (3d) Fixtures, opening up entirely new possibilities in Automation! FAQ: READ BEFORE COMMENTING. All models located in . Variable Sidewall Thickness is only aviable on 3 Tires so far, the fea...

[ Marked Incompatible ] Early Days pack 1760 to 1890 for 4.24

Created by Gizmo_Props

LADIES AND GENTLEMEN! It is time to go to the future of transportation! this is the beginning of a new era where we are no longer dependent on horses or walking for our trips! With the invention of the automobile, we can carry ourselves with machines and h...

[ Marked Incompatible ] Endurance Decals Pack 4.24

Created by Simmer22

A few fictional series sponsors and nine class decals for endurance racing with more to come. Initially this was going to be part of the GTS pack, but became it's own thing. UPDATE 10/11/2020: - Added six new decals for a Rallycross challenge. UPDATE 7/19/...

[ Marked Incompatible ] Endurance GTS Pack 4.24

Created by Simmer22

Initial Release 2/9/2020 Multiple wings, diffusers, fuel caps and more that didn't quite fit the theme of the SuperGT pack, and I felt deserved their own collection. More focused around the endurance racing leagues hosted in Europe in the early 2000's. Thi...

[ Marked Incompatible ] Erga Mio body

Created by JNR231

UPD. Version 2 released, L1 version rework and L2 and L3 variants added. A bus body mod. Inspired by Isuzu Erga Mio NonStep. In stock don't have any side windows and doors (for maximum customization). Can used for any buses from 1980....

[ Marked Incompatible ] Essential 2000s Rim Pack

Created by Centurion_23

5 rims to help fulfil your 2000s wheel needs...

[ Marked Incompatible ] 00s sports body LWB (4.24)

Created by Aruna

00/10’s Sports supercar body LWB (2.8m) with a vast lineup of 18 different variants, some featuring different livery patterns to experiment with. 2000 year. Based upon Hennessey Venom (To scale dimensions.) Standard (OEM Stripes) {N} Standard (With rear wi...

[ Marked Incompatible ] 00s sports body (4.24)

Created by Aruna

00/10’s Sports supercar body (2.3m) with a vast lineup of 18 different variants, some featuring different livery patterns to experiment with. 2000 year. Based upon Lotus Exige (To scale dimensions.) Standard (OEM Stripes) {N} Standard (With rear window) {W...

[ Marked Incompatible ] [LEGACY UE4.24] First Person Walking Mode

Created by Endfinity

WARNING: This mod does not work with the latest version of the game Introducing First Person Mode! https://i.imgur.com/8UOOzyF.jpeg Use walking mode as a new way to design cars! or simply explore the Automation world! https://i.imgur.com/lmktzRL.jpeg Go ba...

[ Marked Incompatible ] First rims

Created by Arn38fr

These are my first rims : - 1983 Peugeot 505 Turbo injection rims. - 1970s Peugeot 504 rims accessory. I may add other rims later....

[ Marked Incompatible ] Folding roof

Created by Arn38fr

Here's a folding roof available in two positions : wide open and close. You'll find it under Windows/roof. Have fun! ...

[ Marked Incompatible ] Font: Alfaowner Script (Chrome + Colors)

Created by Quotex

A new Chrome 3D-look font for any era, inspired by the Alfa Romeo script logo, with connected letters and colors. Based on the "Alfaowner Script" font, it supports, uppercase letters (A-Z), lowercase letters (a-z) and numbers (0-9). Located under badges in...

[ Marked Incompatible ] Font: vw-t2 (Chrome + Colors)

Created by Quotex

A Chrome 3D-look font for the 60s and 70s, based on the font found on a T2 Microbus. Comes with connected and unconnected letters and numbers. Based on the "vw-t2" font, it supports uppercase letters (A-Z) and numbers (0-9). Comes in Chrome, Black, White, ...

[ Marked Incompatible ] Freedom Hauler '10s (4.24)

Created by Aruna

Freedom Hauler '10s body (4.0m) with 4 different variants. 2010 year. Based upon Ford F-150. Single Cab (SC) Dual Cab (DC) SUV (SU) Van (V) For 4.24 (Thanks to Yangx2 for the awesome build featured on main thumbnail!) Please see the updated 4.27 version in...

[ Marked Incompatible ] French executive fastback 80s

Created by matt

This is a conversion of a model that I made about 15 years ago or even more for MB: World Racing game, it was originaly made in Zmodeler... So the model is not perfect. 2 variants: fastback 3m wheelbase station wagon 3.1m wheelbase It shows in 1980 and has...

[ Marked Incompatible ] Garson Zuenglein D.A.D Rims

Created by Pepsi Max

Garson is a Japanese Luxury Automotive Accessories brand. More info here -> https://www.garson.co.jp/english/english_index.html...

[ Marked Incompatible ] Garibaldi Tiny '70s (4.24)

Created by Aruna

Garibaldi Tiny 70’s body (2.0m) with 6 different variants. 1970 year. Based upon Innocenti Mini. Hatchback 3 door (H3) Hatchback 5 door (H5) Convertible 3 door (H3C) Convertible 5 door (H5C) Van 3 door (V3) Van 5 door (V5) For 4.24 Please see the updated 4...

[ Marked Incompatible ] Future concept (openbeta)

Created by Maxbombe

A concept-looking body! The future is now. Quite the experimental mod, I'm yet to be used designing futuristic concepts. Unlocks in 2020. This mod will only work with open beta. Please report any issue with it! Tips for the me : https://en.tipeee.com/maxbo...

[ Marked Incompatible ] Future Bound '78 (4.24)

Created by Aruna

Future Bound ‘78 body (2.4m) with 6 different variants. 1978 year. Based upon DMC Delorean. 2dr Coupe 2dr Inset Coupe 2dr Coupe Targa x2 (Soft or hard top) 2dr Coupe Inset Targa x2 (Soft or hard top) For 4.24 Thanks to Warpman909 and HybridTronny for the e...

[ Marked Incompatible ] Furry Decal Content + Extras

Created by Lucy

Pack contains some Furry-related content, plus a few extra decals. This mod is only to be used on the 4.24 open beta build of Automation. If you dont like it, then feel free to unsubscribe, furries make up the majority of modders for Automation and do a go...

[ Marked Incompatible ] French family car 70s

Created by matt

As it is quite similar to another model I made (French executive fastback) I made also this one from that model... It was not the best 3d model to start with but still here it is... 4 variants 4 door fastback 2 door coupe 5 door station wagon 3 door statio...

[ Marked Incompatible ] Swart's "Be Happy!" Grills

Created by Swartkin

(My "First" Mod!) This is 2 smiling grills based on a car everyone knows! it currently has 2 Grills, one from the Modern Miata and one from the NA miata! If you find a Bug, Point it out in the comments and i'll try to fix it! More grills are coming after t...

[ Marked Incompatible ] Surf Stuff 4.24

Created by stm316

A handful of Surf themed items....

[ Marked Incompatible ] Super SM

Created by Maxbombe

Super SM 2020 design greatly based on 2020 SM by DS design. Unlocks in 2020. Please report any issue with it! Tips for the me : https://en.tipeee.com/maxbombes-workshop...

[ Marked Incompatible ] Super GT Super Pack 4.24

Created by Simmer22

---------- UPDATE: 7/13/2020 ------ MAJOR content update, many new parts, and moving around of things. - Moved many aerodynamic parts to the wings section so that they properly produce downforce when exported to BeamNG.drive, including: - The three existin...

[ Marked Incompatible ] Summer plastic 60s

Created by matt

Here is a car body to enjoy this summer. For now just one variant. Parts for the body can be found in mod: Parts for summer plastic Shows in year 1962. It has some bugs, some anomalies occur when placing fixtures... P.S. to Automation developers: I am stil...

[ Marked Incompatible ] Stylish SUV 10s Limo (4.24)

Created by Aruna

Stylish SUV 10s body (4.6m). 2009 year. Scale based upon Cadillac Stretch Limousine. SUV (5dr) {NL} For 4.24 Extra notes: Some of you may have noticed the other Stylish SUV 10s bodies have been removed from the workshop, but don't fret! They are going to b...

[ Marked Incompatible ] Storm 90s body (4.24)

Created by Aruna

90’s wedge supercar body (2.6m) with a vast lineup of 13 different variants, some featuring different livery patterns to experiment with. 1988 year. Based upon Lister Storm. (To scale dimensions.) Standard Normal {N} Standard Livery 1 {L1} Standard Livery ...

[ Marked Incompatible ] Steering wheels set

Created by JohnDoe1974

here i have some steering wheels for you guys. I will expand the collection over time. if there are any problems, please send it here with a picture: http://discourse.automationgame.com/t/misterl-s-mods/30488/74 my mods are free, but i put a lot of time an...

[ Marked Incompatible ] Some Taillights for old cars

Created by JohnDoe1974

these taillights started as an experiment, i think it turned out quite well and i can publish them. if there are any problems, please send it here with a picture: http://discourse.automationgame.com/t/misterl-s-mods/30488/74 my mods are free, but i put a l...

[ Marked Incompatible ] Some classic door handles

Created by JohnDoe1974

in time i will expand the selection, i hope if there are any problems, please send it here with a picture: http://discourse.automationgame.com/t/misterl-s-mods/30488/74 my mods are free, but i put a lot of time and effort into my mods and would be happy to...

[ Marked Incompatible ] some exhaust pipes

Created by JohnDoe1974

if you use the cutout you have to take it first and then another tailpipe. maybe i will do some more in a quiet hour. if there are any problems, please send it here with a picture: http://discourse.automationgame.com/t/misterl-s-mods/30488/74 my mods are f...

[ Marked Incompatible ] Some interior parts (4.24)

Created by matt

Here are some interior parts, some seats, seatbelts, gauges... I will try to add more in the future... Find them under Misc.Fixtures --- v1.01 Added 4 new seats v1.02 Added gear shifters, rear view mirrors, pedals, steering wheels and some parts to make up...

[ Marked Incompatible ] Some armrests with switches panel

Created by Arn38fr

Here's a mod for the interior of your cars: armrests with switch panel or not....

[ Marked Incompatible ] SHD's Sound System

Created by samsonite

Some interior sound system components. Contains: - A loose speaker to be placed wherever - A rear shelf for sedans/coupes - A rear speaker box for wagons/SUVs As always, if you like my stuff come back and rate. It's how I know my self worth....

[ Marked Incompatible ] SHD's Photo Studio 4.24

Created by samsonite

A studio photoscene with ample light and gorgeous high gloss flake floor. As always, if you like my stuff come back and rate. It's how I know my self worth....

[ Marked Incompatible ] SHD's Interior Roof Panel

Created by samsonite

This is a body-conforming panel that'll follow the curve of your roof. It works like an exterior fixture but it's reversed so it sits inside the car. Simply center it on your roof and scale in each direction until it fits. As always, if you like my stuff c...

[ Marked Incompatible ] SHD's Steering Column

Created by samsonite

Product is exactly as described on tin. As always, if you like my stuff come back and rate. It's how I know my self worth....

[ Marked Incompatible ] 00's Sports/GT body (4.24)

Created by Aruna

00’s Sports/GT body (2.5m) with a vast lineup of 16 different variants, some featuring different livery patterns to experiment with. 1998 year. Based upon Mercedes SL-Class R230. (To scale dimensions.) Normal {N} Livery 1 (Two-Tone) {L1} Livery 2 {L2} Live...

[ Marked Incompatible ] 00's Sports/GT body LWB body (4.24)

Created by Aruna

00’s Sports/GT LWB body (2.8m) with a vast lineup of 16 different variants, some featuring different livery patterns to experiment with. 1998 year. Based upon Mercedes SL-Class R230. Normal {N} Livery 1 (Two-Tone) {L1} Livery 2 {L2} Livery 3 {L3} Livery 4 ...

[ Marked Incompatible ] Gizmo's "Dog-Tape NEGA"(tm) Fixture holes MAKER 4.24

Created by Gizmo_Props

Hello, it's me again and I have great news! After 15 minutes of devellopping experience making a moderatly sticky colored patch, Dog-Tape(tm)'s creators figured they now had enough knowledge to start to mengle with QUANTUM PHISICS!!! Where some fixtures so...

[ Marked Incompatible ] Gizmo's "Dog-Tape"(tm) Fixture holes filler 4.24

Created by Gizmo_Props

Has this ever happen to you? *Bad actor acting dumb, but only looking dumb because of the bad forced acting, being filmed in black and white* "Oh noes! I has all them HOLES around mah fixtures! Thas gon'do no good!" Well this product is RIGHT FOR YOU!! Dog...

[ Marked Incompatible ] Gizmo's Brass Era 6-in-1 Body Pack 4.24

Created by Gizmo_Props

OYE OYE! THE CHASSIS SLIDING BUG IS FIXED!! I REPEAT: THE CHASSIS SLIDING BUG IS FIXED!! THIS NEW VERSION WONT SUFFER FROM IT!! YES!! Please watch my tutorial video to make sure you aren't missing anything about this mod and that you know the tricks to get...

[ Marked Incompatible ] Gizmo's Modular Pop-Up HeadLights (MDPUHL) 4.24

Created by Gizmo_Props

Modular pop-up parts -empty shells -sockets -light units -plastic pop-up interior "fill-blocks" (Watch the tutorial video above to know how to use them best!) If you like my work and want to support me, you can send a donation at my ko-fi: Ko-fi.com/gizmo_...

[ Marked Incompatible ] Gizmo's Prewar TailLights 4.24

Created by Gizmo_Props

Some of them are elevated and should be used with the chrome support pieces in my Prewar headlight mod...

[ Marked Incompatible ] Global Flags Pack

Created by Lucy

Pack contains a few flags from around the world. This mod is only to be used on the 4.24 open beta build of Automation. Disclaimer: mod not by me...

[ Marked Incompatible ] Glowsticks 4.24

Created by Chickenbiscuit

Glowsticks updated to UE4.24...

[ Marked Incompatible ] Gondola 70's Limo body (4.24)

Created by Aruna

Gondola 70’s limo body (4.4m) with 3 different variants. 1970 year. Based upon Aston Martin Lagonda Stretch Limo 4dr (N) Stretch Limo Hard Top Convertible 4dr (NH) Stretch Limo Soft Top Convertible 4dr (NS) For 4.24 Open Beta Extra notes: Some of the morph...

[ Marked Incompatible ] GrandSport Font free colorable

Created by JohnDoe1974

A new Version from my font. The letters are fixtures and free colorable. if there are any problems, please send it here with a picture: http://discourse.automationgame.com/t/misterl-s-mods/30488/74 my mods are free, but i put a lot of time and effort into ...

[ Marked Incompatible ] GrandSportFont Chrome

Created by JohnDoe1974

My font now for the 4.24 version You may have to subscribe all three to work properly. if there are any problems, please send it here with a picture: http://discourse.automationgame.com/t/misterl-s-mods/30488/74 my mods are free, but i put a lot of time an...

[ Marked Incompatible ] Historic Firearms Pack #1 - WWII Part 1

Created by Deltariuns

I didn't make any of these models, all credit goes to their respective owners. One thing to keep in mind that this modpack is 2gb, it's pretty chunky. Mauser C96 by Andriy Shekh - https://sketchfab.com/3d-models/mauser-gun-c96-be1e0793a5be47b199e3c97172e37...

[ Marked Incompatible ] Intercoolers (UE4.24)

Created by GrowfyBruce

Three styles of intercooler designed to be mounted behind or on top of grilles and vents. Important: When mounting the intercooler behind a fixture select a grille texture with the Translucent tooltip to make the intercooler visible....

[ Marked Incompatible ] Indonesian License Plates

Created by Overev

A pack of Indonesian License Plates. Contains: 2 Privates (White on Black) 1 Unregistered (Red on White) 1 Commercial/Fleet (Black on Yellow) 1 Government-Owned (White on Red) 1 Free Zone (Black on Green) NOTE: Size on red axis has to be 0.90 to get the co...

[ Marked Incompatible ] Indicators for the classic cars

Created by JohnDoe1974

here are a few turn signals that I made for my classics. they can also be used for taillights if there are any problems, please send it here with a picture: http://discourse.automationgame.com/t/misterl-s-mods/30488/74 my mods are free, but i put a lot of ...

[ Marked Incompatible ] Indicators for my bumper mod for 4.24

Created by JohnDoe1974

Here are some indicators for my classic bumper mod. They work well with some vanille bumpers to. Have fun with them....

[ Marked Incompatible ] Interior Pack 4.24

Created by Simmer22

A bunch of different interior parts to suit your needs. Includes seats, dashes, gear shifters, firewalls, door panels, rear view mirrors, steering wheels and eventually more. This is for the open beta release running UE 4.24. If you have compatibility issu...

[ Marked Incompatible ] Italian sports 70s

Created by matt

Here is a body based of a well known Italian sports car from the 70s. -some body morphs -just one variant (a new one with rear and mid engine options - same body - year 1971) Have fun with it. v1.01 added rear and mid engine variant - shows in year 1971 as...

[ Marked Incompatible ] Swoopy 10s Minivan MWB

Created by Kyorg

08' Toyota MPV body, 2.8m with 2 different variants. 2008 unlock year. Based on the Toyota Sienna. 5dr MPV 5dr Van For 4.24 Body commissioned by SyberRacer SWB: https://steamcommunity.com/sharedfiles/filedetails/?id=2580288227 LWB: https://...

[ Marked Incompatible ] Jackrabbit Badge UE4

Created by Chase

This is an update of my older "Jackrabbit Industries" Badge for Automation. This is for my own personal in-game company. I ask that you please not use these or claim the company name or logo as your own in any public or social media. The design of the badg...

[ Marked Incompatible ] Junkmod [ Old ]

Created by punthoofd

Adds things you can place in the back of your pickup truck Adds: -Rocks -Barrels -Pallet -Tires -Wheel fixures -Wheelbarrow -Plywood stack -Brick Pile -Cardboard boxes -Boxes -Tools Planning on adding -Plastic boxes -Road blockades -Cinder blocks If you ha...

[ Marked Incompatible ] Keudn's Livery Decals: Blues

Created by Keudn

Some basic decal shapes for making car liveries. Mod contains a square, triangle, and circle in the following colors. Note that while the exact HSV values for each color are listed below, they may not match in Automation or in Beam. Unfortunately if you wa...

[ Marked Incompatible ] Keudn's Livery Decals: Oranges

Created by Keudn

Some basic decal shapes for making car liveries. Mod contains a square, triangle, and circle in the following colors. Note that while the exact HSV values for each color are listed below, they may not match in Automation or in Beam. Unfortunately if you wa...

[ Marked Incompatible ] Keudn's Livery Decals: Reds

Created by Keudn

Some basic decal shapes for making car liveries. Mod contains a square, triangle, and circle in the following colors. Note that while the exact HSV values for each color are listed below, they may not match in Automation or in Beam. Unfortunately if you wa...

[ Marked Incompatible ] Keudn's Livery Decals: Silver and Gray

Created by Keudn

Some basic decal shapes for making car liveries. Mod contains a square, triangle, and circle in the following colors. Note that while the exact HSV values for each color are listed below, they may not match in Automation or in Beam. Unfortunately if you wa...

[ Marked Incompatible ] Headlights for the classics pack

Created by JohnDoe1974

Here is my headlight pack. there are some new ones, some old ones I have to rework and will follow at some point. if there are any problems, please send it here with a picture: http://discourse.automationgame.com/t/misterl-s-mods/30488/74 my mods are free,...

[ Marked Incompatible ] Grille Bars (4.24)

Created by Terrazi

If you like my work and are felling generous, consider supporting me on Ko-fi =D https://ko-fi.com/terrazicaio "Wait a second, isn't that just a regular bumper bar?" Yes, but also no =V Since many already use the bumper bar for grill trims, i just took the...

[ Marked Incompatible ] HyperKit 4.24

Created by Chickenbiscuit

HyperKit updated for UE4.24 Jesko wing made by Simmer....

[ Marked Incompatible ] Keudn's Livery Decals: Yellows

Created by Keudn

Some basic decal shapes for making car liveries. Mod contains a square, triangle, and circle in the following colors. Note that while the exact HSV values for each color are listed below, they may not match in Automation or in Beam. Unfortunately if you wa...

[ Marked Incompatible ] L5 [4.24]

Created by Cyborg Silvia

THIS PACK IS FOR THOSE WHO ARE STAYING ON UPDATE 4.1 WHEN 4.2 COMES OUT. YOU WILL NEED TO UNSUB FROM THE OLD MODS IF YOU SUB TO THIS ONE. This pack contains all of L5’s mods in one. These packs are L5 Rear Diffusers 4.24 L5 Fat Lip 4.24 L5 the Fog light 4....

[ Marked Incompatible ] L5's Modular Headlights 4.24

Created by Chickenbiscuit

L5's MDHL mod updated for 4.24 with some bug fixes and changes. Sorry for the wait. More L5 fixture updates coming soon....

[ Marked Incompatible ] license plate lights for my flatbed truck

Created by JohnDoe1974

if there are any problems, please send it here with a picture: http://discourse.automationgame.com/t/misterl-s-mods/30488/74 my mods are free, but i put a lot of time and effort into my mods and would be happy to receive a small donation https://www.paypal...

[ Marked Incompatible ] Light Sports 800

Created by Portal Kat

The Light Sports 800 is a small, 2 meter wheelbase sports car body based directly off of the '60s Toyota Sports 800. There is only one variant, as this is my first ever mod, but it's still pretty fun to use. X3...

[ Marked Incompatible ] Lincoln Town Car 1990

Created by Maxbombe

So, here is a Lincoln Town Car body from 1990 for you to have fun with. Unlocks in 1985. Please report any issue with it! Tips for the me : https://en.tipeee.com/maxbombes-workshop...

[ Marked Incompatible ] LMP 70's (4.24)

Created by Aruna

LMP 70’s body (2.3m) with 3 different variants. 1965 year. Based upon Porsche 917 Coupe 2dr (Coupe) Coupe Inset 2dr (Inset) Speedster 2dr (Speedster) For 4.24 Open Beta Extra notes: This body only works well with space-frame chassis, using monocoque will c...

[ Marked Incompatible ] Steelie's wardrobe Hubcaps pack

Created by Maxbombe

Some more hubcaps for more variety, mostly 80's. Material bug now FIXED thanks to Hard Rooster! Please report any issue with them!...

[ Marked Incompatible ] Some pointless Interior stuff

Created by stm316

Yeah, I know, other peeps are making this stuff too, but I'm using this to learn a few things. 3 radios, 3 different types of speaker, 2 gauges, and a clock... so far....

[ Marked Incompatible ] Some interior parts

Created by JNR231

Some interior parts from my Nissan Terrano replica....

[ Marked Incompatible ] SHD's Interior Door Panels 2.0

Created by samsonite

There's lots of armrests here on the workshop, but there's nothing to attach them to! This mod aims to fix that. Create beautiful interiors with this set of door cards. There's three styles, each with a front door and rear door version that has a cutout fo...

[ Marked Incompatible ] SHD's Floor Pans

Created by samsonite

Some shaped footwells for making interiors with. Includes a front and rear pan, each with two material slots. As always, if you like my stuff come back and rate. It's how I know my self worth....

[ Marked Incompatible ] Sharyō 90's (4.24)

Created by Aruna

90’s estate body (2.7m) with a lineup of 10 different variants. 1985 year. Based upon Nissan Stagea WC34. (To scale dimensions.) There is a couple morphs that overlap, but these are due to re-edits I made after a few steps, making them hard to work with. (...

[ Marked Incompatible ] Miscellaneous interior parts

Created by Arn38fr

Here's some misceallanous fixtures for interior of your cars. I'll try to add more in the future. Find them under Misc.Fixtures. 05/05/2021 - New front seat added 12/05/2021 - New sport front seat added in 2 configurations 30/05/2021 - 2 new 1990's steerin...

[ Marked Incompatible ] 90s Kei car (4.24)

Created by Aruna

90’s Kei car body (2.3m) with a vast lineup of 15 different variants, some featuring different livery patterns to experiment with. 1985 year. Based upon Daihatsu Mira L200. (To scale dimensions.) Standard 3 door (N) Standard 5 door (N5) Livery 1 (L1) Liver...

[ Marked Incompatible ] Modern Crossover Grille 4.24

Created by thecarlover

A modern grille in the style found on the bumper of many crossovers. Comes with six variants and updated to UE4.24...

[ Marked Incompatible ] More of my classic taillights for 4.24

Created by JohnDoe1974

if there are any problems, please send it here with a picture: http://discourse.automationgame.com/t/misterl-s-mods/30488/74 my mods are free, but i put a lot of time and effort into my mods and would be happy to receive a small donation https://www.paypal...

[ Marked Incompatible ] Modular Wing [4.24]

Created by The Stig Is A Spy

Please read the description before subscribing. Background As a holiday gift, I prepared this set of pieces that can be used to make wings of various shapes and sizes. More parts are in the works. Usage Notes These fixtures are designed to work with the he...

[ Marked Incompatible ] Modern Oval Indicator 4.24

Created by thecarlover

A slightly recessed oval indicator, updated for the UE4.24 version....

[ Marked Incompatible ] MOREnaments

Created by Gizmo_Props

This mod brings a lot of new hood ornament to the game, These are made of free 3d models from thingiverse.com They are originally meant for 3d printing Some have very complex shapes and you should avoid adding to many to your cars, as explained in one of t...

[ Marked Incompatible ] New Citroënn C6 body mod

Created by Maxbombe

Updated the whole body (new IDs so no compatibility with previous version) More morphs, more versatility, just better. Unlocks in 1998. ...

[ Marked Incompatible ] Offroad/Trail Wheel Pack by TIMS (4.24)

Created by TIMS

This pack includes 10 Offroad/Trail-Inspired Wheels for your SUV/UTE builds. Wheels in this pack intend to replicate the: • 4x4 Engineering Bradley V • Black Rhino Bantam • EVO Corse DakarZero • Fuel D579 Vector • Motegi Racing MR150 Trailite • PCOR Alloy ...

[ Marked Incompatible ] Off Road Storage - Roof Racks and more Storage Options

Created by Captain Toggle

A small collection of roof racks and storage options for off road vehicles. Fixtures will appear under 'Misc'. Due to the size of some of these fixtures it may not be possible to spawn the item on smaller areas of vehicles. Try initially placing the fixtur...

[ Marked Incompatible ] OEM/Factory Wheel Pack by TIMS (4.24)

Created by TIMS

This pack includes 5 OEM/Factory-Inspired Wheels from various car models made in the 2010s. Wheels in this pack include that of the: • 2014+ Toyota FJ Cruiser • 2016+ Toyota Fortuner • 2014+ Toyota Hilux • 2018+ Mitsubishi Pajero • 2017+ Ford Ranger ...

[ Marked Incompatible ] OEM/Factory Wheel Pack 2 by TIMS (4.24)

Created by TIMS

This pack includes 10 OEM/Factory-Inspired Wheels from various car models made in the 10s/20s. Wheels in this pack include that of the: • 2015 Toyota Fortuner • 2015 Toyota Land Cruiser Prado • 2014 Toyota 4Runner • 2017 Lexus LX570 • 2019 Ford Ranger Rapt...

[ Marked Incompatible ] Open Wheel Pack

Created by Simmer22

!!! THIS MOD WILL BE VERY DIFFICULT TO USE IF YOU ARE NOT ON THE OPEN BETA BRANCH !!! FAQs I'm Seeing in the Comments: 1. - These are fixtures. This is not a body mod. These fixtures are found in the categories listed at the end of this description. 2. - T...

[ Marked Incompatible ] old german police / fire brigade emergency light suitable for my transporter

Created by JohnDoe1974

if there are any problems, please send it here with a picture: http://discourse.automationgame.com/t/misterl-s-mods/30488/74 my mods are free, but i put a lot of time and effort into my mods and would be happy to receive a small donation https://www.paypal...

[ Marked Incompatible ] Parts for the small light utility vehicle

Created by matt

Parts for body: Small light utility vehicle 50s... -3 roof types -a rollbar -a box -2 types of doors -a simple seat -tailgate-frame parts...

[ Marked Incompatible ] Parts for the Rancho

Created by JohnDoe1974

if there are any problems, please send it here with a picture: http://discourse.automationgame.com/t/misterl-s-mods/30488/74 my mods are free, but i put a lot of time and effort into my mods and would be happy to receive a small donation https://www.paypal...

[ Marked Incompatible ] Parts for summer plastic

Created by matt

Parts for summer plastic 60s body and some other parts for another car... --- v1.01 added headlight - two versions - conforming mesh and a non conforming one......

[ Marked Incompatible ] Parts for kei truck

Created by matt

Parts for body Fun kei truck... You get: 3 roof types, a rollbar, a rail, 3 types of doors....

[ Marked Incompatible ] Parts for another summer plastic

Created by matt

Parts for another summer plastic body, maybe usable also for some other builds......

[ Marked Incompatible ] Patchwork 4.24

Created by Chickenbiscuit

Updated for 4.24 Now with more brown....

[ Marked Incompatible ] SHD's Cargo Divider

Created by samsonite

Just a mesh partition. I dunno, use it in vans or police cars or whatever. Made it for my own purposes, thought maybe like one or two others might find a use for it. As always, if you like my stuff come back and rate. It's how I know my self worth....

[ Marked Incompatible ] Sharyō 90's SWB (4.24)

Created by Aruna

90’s estate body (2.2m) with a lineup of 11 different variants. 1985 year. Based upon dimensions of Nissan Pulsar(To scale dimensions.) There is a couple morphs that overlap, but these are due to re-edits I made after a few steps, making them hard to work ...

[ Marked Incompatible ] Set of seats for modern cars

Created by Arn38fr

Various front & rear seats configurations for a modern car....

[ Marked Incompatible ] Rimset from the 70s to the 80s

Created by JohnDoe1974

Here are some rims from the 70s and 80s. Little by little I'll add some more. If you like my mods, I would appreciate a small donation https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=WKFAZDKCQKLZY&source=url Have fun with them...

[ Marked Incompatible ] Rimset from the 50s to the 60s

Created by JohnDoe1974

Here are some rims from the 50s and 60s. Little by little I'll add some more. If you like my mods, I would appreciate a small donation https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=WKFAZDKCQKLZY&source=url Have fun with them!...

[ Marked Incompatible ] Rewind Time '00s SWB (4.24)

Created by Aruna

Rewind Time ‘00s body SWB (2.5m) with 7 different variants. 1998 year. Scale based upon Audi TT. Coupe (C) Coupe Inset (I) Fastback/Shooting Brake 2 door (F2) Fastback/Shooting Brake 4 door (F4) Spyder Soft (CS) Spyder Hard (CH) Futuristic Coupe (IR) For 4...

[ Marked Incompatible ] Rewind Time '00s (4.24)

Created by Aruna

Rewind Time '00s body (2.7m) with 7 different variants. 1998 year. Based upon Audi R8. Coupe (C) Coupe Inset (I) Fastback/Shooting Brake 2 door (F2) Fastback/Shooting Brake 4 door (F4) Spyder Soft (CS) Spyder Hard (CH) Futuristic Coupe (IR) For 4.24 Please...

[ Marked Incompatible ] Modern Mirrors [4.24]

Created by The Stig Is A Spy

A collection of various modern side mirrors and cameras. Includes mirrors and cameras from the following cars: Artega Scalo Superelletra Artega Scalo Superelletra, level Bugatti Chiron Honda E Honda E, shortened Honda NSX GT500/Mugen NSX-RR (top-mount) Hon...

[ Marked Incompatible ] Modern Firearms Pack #2 - Eastern Law Enforcement / Military

Created by Deltariuns

The car in the cover picture is by Taff. Thanks Taff! All models go to their respective creators. AK-74M by FJH - https://sketchfab.com/3d-models/ak-74m-assault-rifle-9084c3bae8224d338103997bc3101480 AKM by emran.bayati - https://sketchfab.com/3d-models/ak...

[ Marked Incompatible ] Modern Firearms Pack #1 - Western Law Enforcement / Military

Created by Deltariuns

Notice: all of the guns will point in different directions when you spawn them in. I'll fix this in later packs for convenience. Cover photo by 66mazda. Police car photo by Secrane. Part 1 of the firearms pack. All models go to their respective creators. H...

[ Marked Incompatible ] Microgramma Font

Created by Quotex

My first ever mod! Based on the "Microgramma" font, it supports lowercase letters, uppercase letters, numbers and a few symbols. I will try to make version in different colors later as well, but for now only Black is available. Located under badges in fixt...

[ Marked Incompatible ] Nissan Terrano WBYD21 body

Created by JNR231

Body inspired by Nissan Terano WD21. Contain some problems in UV and topology (not critical)....

[ Marked Incompatible ] Ninefive 00s body (4.24)

Created by Aruna

00’s sedan body (2.7m) with 4 different variants. 1995 year. Based upon Saab 9-5. (To scale dimensions.) Standard Normal {N} Standard Two Tone {TT} Wagon/Estate {EST} Ute {UTE} For 4.24 Open Beta Please see the updated 4.27 version in my workshop!...

[ Marked Incompatible ] revised 60s body with 270cm wheelbase

Created by JohnDoe1974

This body based like the old one on the BMW E3/E9 from the 60s. This comes with new GUIDs, so your old cars are not broken, but I won't update the old body anymore. if there are any problems, please send it here with a picture: http://discourse.automationg...

[ Marked Incompatible ] revised 60s body with 240cm wheelbase

Created by JohnDoe1974

This body based like the old one on the BMW E3/E9 from the 60s. This comes with new GUIDs, so your old cars are not broken, but I won't update the old body anymore. if there are any problems, please send it here with a picture: http://discourse.automationg...

[ Marked Incompatible ] Overland 4x4 Fixture Pack by TIMS (4.24)

Created by TIMS

This pack includes various Overland-Inspired Fixtures such as snorkels, a rooftop tent, roof racks, cargo boxes, etc. Contents: • Modular Roof Rack and Accessories • Modular Rear Tray/Canopy • Rock Sliders • Towing Mirrors • Tire 3D Fixtures • UHF Antennas...

[ Marked Incompatible ] Overev's Manufacturer Badges

Created by Overev

My companies' badges, just made it in 22 hours kek I give you consent of using these badges for your company, i'd be happy to see my mod to be used. Currently Includes: New Age Kahori Limited Mizuki Motors Soyun Motor Peraga Internasional AvtoPetro Kaze GT...

[ Marked Incompatible ] Outrun '00s (4.24)

Created by Aruna

Outrun 00’s body (2.6m) with 5 different variants. 1995 year. Based upon Ferrari 360. Coupe (C) Spyder Soft (SS) Spyder Hard (SH) FR Coupe (FR) FR Coupe Targa (FRT) For 4.24 Please see the updated 4.27 version in my workshop!...

[ Marked Incompatible ] RB RIMS [4.24]

Created by Cyborg Silvia

THIS PACK IS FOR THOSE WHO ARE STAYING ON UPDATE 4.1 WHEN 4.2 COMES OUT. YOU WILL NEED TO UNSUB FROM THE OLD MODS IF YOU SUB TO THIS ONE. This pack contains all of my Rim mods in one. These packs are RB OEM Rim pack 1 Fourteen40 Rim pack RB Hubcaps 1 RB HR...

[ Marked Incompatible ] RB MDHL V3 [4.24]

Created by Cyborg Silvia

THIS PACK IS FOR THOSE WHO ARE STAYING ON UPDATE 4.1 WHEN 4.2 COMES OUT. YOU WILL NEED TO UNSUB FROM THE OLD MODS IF YOU SUB TO THIS ONE. This pack contains all of my MDHL mods in one. RB MDHL V3 424 This pack contains all of my MDHL mods in one. These pac...

[ Marked Incompatible ] Polestar 3.1 meters wheelbase

Created by Maxbombe

bigger Unlocks in 2015....

[ Marked Incompatible ] Polestar LWB

Created by Maxbombe

It's just the polestar, but in 2.9 meters wheelbase....

[ Marked Incompatible ] Project Itasha | Holomyth Pack

Created by variationofvariables

There's too many references for me to fit into this, and if I were to tako bout it it wouldn't fit here because Steam's a bit too much like a toxic detective. Either way, I'll be enjoying my bucket of KFP while listening along to The Real Grim Shady. a Pac...

[ Marked Incompatible ] Racing Car Sponsors: Morley & Tarquini

Created by Quotex

A set of 4 different race car sponsor decals, inspired by Marlboro and Martini. Made for use on my BRC race car. Logo Design: Quotex Implentation: Borisu Located under badges in fixture menu. Note: The Full Morley logo does not display the text in BeamNG.D...

[ Marked Incompatible ] Racing Number Decals (UE4.24)

Created by GrowfyBruce

Two styles of flat vinyl racing number decals....

[ Marked Incompatible ] RB FIXTURE [4.24]

Created by Cyborg Silvia

THIS PACK IS FOR THOSE WHO ARE STAYING ON UPDATE 4.1 WHEN 4.2 COMES OUT. YOU WILL NEED TO UNSUB FROM THE OLD MODS IF YOU SUB TO THIS ONE. This pack contains all of my Fixture mods in one. These packs are RB Plates. RB-Simple mod: Subaru Scoop RB Race Aero ...

[ Marked Incompatible ] RB BODYS [4.24]

Created by Cyborg Silvia

THIS PACK IS FOR THOSE WHO ARE STAYING ON UPDATE 4.1 WHEN 4.2 COMES OUT. YOU WILL NEED TO UNSUB FROM THE OLD MODS IF YOU SUB TO THIS ONE. RB BODYS 424 This pack contains all of my Body mods in one. These packs are 10's Kei Offroad 10's Big Kei Offroad 10s ...

[ Marked Incompatible ] RADiator

Created by Simmer22

A simple mod since no mod for UE 4.24 currently fills this gap. May expand upon later. Material slot for decal is glass so that you can remove the decal. Just click on the decal material and change it to transparent. Contains: Radiator (1 Variant) ...

1954 Lancia D50

Created by fillman86

This is a revised version of my other D50. The biggest thing is that this is the correct scale/wheelbase. This vehicle in BeamNG is very jiggly. The original tire sizes are 5.5 inches wide on the front, and 7 inch on the rear with 16 inch wheels. If you wa...

Automation - The Car Company Tycoon Game