Accelerator stuck using G27

[Pulkafettot]

So I tried to set this up with my G27 but no matter what I do it seems the accelerator is stuck on max. I tried setting it to "normal" in the settings, which made it inverse. So I thought logically maybe inverse would solve the problem, but it just made it stuck at 100%. I've installed the latest software for the wheel but it made no difference. Doesn't seem to matter if I bind the brake ♥♥♥♥♥ or something to the accelerator either.

Wheel works fine in all other games.

Even if I reset the controls the accelerator says it's at max right now, without being bound.

[FTL_FAM]

In the logitech profile software you can download for the G27, there is a box you must tick under Global Device Settings that says "report as combined pedals".

I would then set everything back to default in ETS2, see if that solves your problem, and then customize controls to your liking.

[Pulkafettot]

My man. Super Hexagon on the house.

[[CG]strike4ce]

I had this problem in the past, when I created a new profile it seemed to work fine but with my main profile it just wouldn't set up the pedals correctly.

I'm getting the G27 tomorrow, hoping it works smoothly as everyone seems to comment on how well it performs for ets2

[Pulkafettot]

Początkowo opublikowane przez strike4ce:

I had this problem in the past, when I created a new profile it seemed to work fine but with my main profile it just wouldn't set up the pedals correctly.

I'm getting the G27 tomorrow, hoping it works smoothly as everyone seems to comment on how well it performs for ets2

Yeah follow John Connors instructions, did it for me.

[Queen Ang]

i use g 29 in ats, same issue, and yes logicly i set to normal did nothing, it seems if you disconnect the brake ♥♥♥♥♥ in ats/ets it always keeps the brake on accept when u give gas, so you get no reverse in simple auto matic :( but u can fricken drive ima try ur tho

[wackyhead04]

Początkowo opublikowane przez Furry Lamoid:

i use g 29 in ats, same issue, and yes logicly i set to normal did nothing, it seems if you disconnect the brake ♥♥♥♥♥ in ats/ets it always keeps the brake on accept when u give gas, so you get no reverse in simple auto matic :( but u can fricken drive ima try ur tho

I have the g29 and I had the same problem... you have to create a new profile in ETS, it's annoying but its the only way I've got it to work

[DeadC]

Początkowo opublikowane przez wackyhead04:

Początkowo opublikowane przez Furry Lamoid:

i use g 29 in ats, same issue, and yes logicly i set to normal did nothing, it seems if you disconnect the brake ♥♥♥♥♥ in ats/ets it always keeps the brake on accept when u give gas, so you get no reverse in simple auto matic :( but u can fricken drive ima try ur tho

I have the g29 and I had the same problem... you have to create a new profile in ETS, it's annoying but its the only way I've got it to work

I have same issue realy annoying !!!!!!

[Asigion]

Make sure the Steering is set to Centred and the Accelerator is set to Inverted and the Brake is set to Inverted in the Controller options. Also make sure there are no buttons assigned to Throttle in the secondary controller in Keyboard options.

[DrOversteer]

Początkowo opublikowane przez Willy.J.K:

make sure there are no buttons assigned to Throttle in the secondary controller in Keyboard options

This was the problem here.

[Sarge2u08]

Początkowo opublikowane przez Pulkafettot:

So I tried to set this up with my G27 but no matter what I do it seems the accelerator is stuck on max. I tried setting it to "normal" in the settings, which made it inverse. So I thought logically maybe inverse would solve the problem, but it just made it stuck at 100%. I've installed the latest software for the wheel but it made no difference. Doesn't seem to matter if I bind the brake ♥♥♥♥♥ or something to the accelerator either.

Wheel works fine in all other games.

Even if I reset the controls the accelerator says it's at max right now, without being bound.

HI GUYS..... I to just had this problem but solved it.....
Put your profiles onto usb pen then delete your profile in ets2 profile folder then copy and paste back in to profile folder from usb pen