Any specific settings for ultrawide monitors?

[Gene R]

I changed my monitor to a 32:9 one. The game runs in native resolution just fine, but the geometry is heavily warped closer to the edges. Like, when I'm looking at a tree near the edge of a screen, it's about 3 times wider than the same tree in the center of the screen.
The effect is not really noticeable when I'm driving on highways, but 90 degrees turns are nauseating. Changing the FOV to someting wider only exarcebates that, and a narrow FOV kinda negates the whole idea of running ultrawide. Is there any way to mitigate that?

[Silverbiker]

I have LG 34" UWD HD (hoping to upgrade UHD soon) and have resolution set at 2560x1080 (native reolution) and everything looks good, no distortion at all.
Can'it offhand say what my FOV is but will let you know when I fire the game up.
As a rough guide I can see about 2/3 of dash/windscreen and that's fine.
Will go to 3413x1440 but have to reset the display outta game as everything is so tiny.

[Supernovae]

You probably want to set up your monitor as triples for the FOV projection adjustments. This thread[www.assettocorsa.net] might help with finding the right dimensions for your "virtual" triples. There are plenty of FOV calculators online (I use this one[www.fov-calculator.com]) to help convert between the numbers you'd use with natural geometry to ETS2, ACC, etc.

[Blaagh]

@Silverbiker you have 21:9 ratio. he has 32:9 (thats 2x 16:9 monitors next to each other)

@topic
you might want to dabble with multimonitor config. for this you have to enable the developer console: open config.cfg in documents/euro truck simulator 2 and search for the line
uset g_developer "0" and change 0 to 1

then you can enable multimon modes from the console: (~ key below ESC)
https://eurotrucksimulator2.com/multimon_config.php

doesn't matter if its joined monitors or one ultra-wide. preset 2 works with 3 camera-angles that are linked

[Silverbiker]

Originally posted by Blaagh:

@Silverbiker you have 21:9 ratio. he has 32:9 (thats 2x 16:9 monitors next to each other)

@topic
you might want to dabble with multimonitor config. for this you have to enable the developer console: open config.cfg in documents/euro truck simulator 2 and search for the line
uset g_developer "0" and change 0 to 1

then you can enable multimon modes from the console: (~ key below ESC)
https://eurotrucksimulator2.com/multimon_config.php

doesn't matter if its joined monitors or one ultra-wide. preset 2 works with 3 camera-angles that are linked

Yeah, was a bit tired when I read post. My mistake along with typo's.
Just got back from a long ride out.
Better now I had nap