saitek heavy eqpt. wheel & pedal nur Vollgass oder Vollbremsung / only full throttle or full braking

[->Acer<-]

Hi, ich such jetzt schon eine Weile das Netz ab kann aber nichts dazu finden.
Wenn ich die Pedale betätige, geht nur Vollgas oder Vollbremsung, kein "leicht drücken = langsam fahren". Kann man das einstellen oder unterstützt das Spiel die Pedale vom saitek heavy eqpt. wheel & pedal einfach nicht?
(Zentral, Vertausch Zentral und Normal einstellung hab ich getestet, funktioniert auch nicht)
In LS22/FS22 funktionieren die Pedalen wie sie sollen.

Danke

Hi, I've been searching the internet for a while now but can't find anything about it.
When I press the pedals, there is only full throttle or full braking, no "press lightly = drive slowly". Can i adjust this or does the game support the pedals from the Saitek heavy eqpt. Wheel & pedal just not?
(I tested central, swapping central and normal settings, it doesn't work either)
In FS22 the pedals work as they should.

Thanks

[mojo_musica]

Have you installed any drivers for the wheel and pedals from Saitek? Have you tried calibrating them in Windows devices to see if they are recognised correctly and showing the correct movement as you press them? Have you turned off any Steam controller input and gone to the control Wizard in the game to set everything up? Are the wheel and pedals recognised in the game as Saitek controllers? The game supports a wide range of controllers from keyboard and mouse, simple 9-button keypads up to Logitech racing wheels, you have to set it up to use them.

Haben Sie Treiber für das Rad und die Pedale von Saitek installiert? Haben Sie versucht, sie auf Windows-Geräten zu kalibrieren, um zu sehen, ob sie richtig erkannt werden und beim Drücken die richtige Bewegung zeigen? Haben Sie alle Steam-Controller-Eingaben ausgeschaltet und sind zum Steuerungsassistenten im Spiel gegangen, um alles einzurichten? Werden das Lenkrad und die Pedale im Spiel als Saitek-Controller erkannt? Das Spiel unterstützt eine breite Palette von Controllern, von Tastatur und Maus über einfache 9-Tasten-Tastaturen bis hin zu Logitech-Rennrädern. Sie müssen es einrichten, um sie verwenden zu können.

[Briannospam]

Originally posted by ->Acer<-:

(I tested central, swapping central and normal settings, it doesn't work either)

Have you also tried inverting the pedals in the game's controller settings?
Also: have you checked that the function of the pedals is correctly defined? (many people find that by default it is not the accelerator pedal that works as an accelerator etc.)

[->Acer<-]

Hey, the Saitek Driver Page is offline. Yes i tried to calibrate. But there is also just "on" and "off" if i push the Pedal. When accelerating, the calibration cross only goes all the way up and when braking, it only goes all the way down (Nothing in between).
Don't know if i have turne of the Steam controllen and dont know how. Now all Setting deleted and i have set all again.
But it still works fine with FarmingSimu 22 how it should.
Don't know what else i can do, that Saitek think starts to anoying me ... works just with one Game "yea" 🙄

I found a option that Game controller in Steam but it says "Steam Controller Enabled, always required". so that i can't change

[matke587]

oh god I had this same issue. With the wheel and pedals being all or nothing. I finally figured out what was causing it.

Have you assigned the pedals to the accelerate/ brake pedal buttons in the button configuration page? if yes unassigned them. You don't need them here in that setting.

Go to the controller settings and scroll down you will eventually come to some more sliders for steering wheel, accelerator and brake... you can assign them here. Your steering wheel and pedals will now be a lot smoother and act like they are meant to.

[->Acer<-]

Sorry I am so dump af 😬
I thought in Windows Controller Calibration I could only calibrate the steering wheel. I simply pressed the pedals and then saw that I could calibrate them there too.

So Thank u all ^^

[matke587]

Originally posted by ->Acer<-:

Sorry I am so dump af 😬
I thought in Windows Controller Calibration I could only calibrate the steering wheel. I simply pressed the pedals and then saw that I could calibrate them there too.

So Thank u all ^^

Drove me mad for a few days, trying to work out why my heavy bundle pack wasn't working right. I would move the steering wheel 1 inch and the on screen steering wheel would shoot round to full lock! Same with the pedals, pressing brakes was an emergency stop every time!

Used the windows controller calibration, assigned them onto the buttons, you know forward, backward, left and right. Even used the set up wizard in game. But the steering, brakes and accelerator where always on/off. Was getting really peeved off with it and almost quit playing this excellent game. Until by shear chance I noticed those sliders on the end of the in game controller section. Altered them and hey presto the controllers worked perfectly.. I felt dumb af too :D