商店页面
Monster Hunter Wilds
全部 讨论 截图 艺术作品 实况直播 视频 新闻 指南 评测

Monster Hunter Wilds

商店页面
查看统计:
全球成就
Danielsan 3 月 8 日 上午 9:40
Razer core X 4070 MSI unplayble.
Always 40 fps also with frame gen. 4k, full hd or 720p. no matter what i do, always bad performance.

If i play without egpu in portability, the game runs better... no words
最后由 Danielsan 编辑于; 3 月 8 日 下午 3:12
该主题的作者已标记一个回帖作为问题的解答。
点击这里跳转至那一条帖子。
引用自 VascoNgC:
I've been experiencing the same issue as you. I'm using a ROG Ally (Z1E) with an RTX 4060 eGPU (SWGZONE). No matter how I adjust the settings (1080p, 720p, 1440p, Balanced, DLAA, ray tracing on/off), the FPS always remains around 50 or lower. Most importantly, I've noticed the CPU usage is consistently very high, usually around 80-90%, while GPU usage remains low, around 50-60%.

Recently, after updating the Nvidia software, I managed to achieve nearly 60 FPS using the "Optimization" feature. However, this automatically sets many graphics options to low, which doesn't make sense since the CPU usage remains high, and the GPU still isn't fully utilized.

I know some might suggest the CPU isn't strong enough, but considering that the Z1E APU can run MH Wilds independently without an eGPU, it's hard to believe it's the CPU's fault. Moreover, I can play other AAA games perfectly with full GPU utilization—for example, Cyberpunk 2077 at 1080p with high settings and ray tracing enabled, consistently running above 70 FPS.

Lastly, I'd like to share an interesting workaround I discovered during my testing: If you suddenly increase all graphical settings in MH Wilds to extreme levels (DLAA, high ray tracing, etc.), the FPS will naturally drop dramatically (to around 8 FPS). But if you then revert to medium or high settings (or whatever your preferred settings are), there's a chance the CPU and GPU usage will balance out correctly (around 50% CPU and 90% GPU usage). Unfortunately, as soon as you move to another map or start a new mission, you'll have to repeat this process. It doesn't always work consistently and can be very tedious, so eventually, I stopped using this method altogether.

In my opinion, this issue is definitely related to the game itself, possibly how it handles eGPUs connected via USB4.
< >
正在显示第 61 - 75 条，共 83 条留言
This PC (已封禁) 3 月 9 日 上午 10:05 
引用自 Danielsan：
i dont know what to do, in game it shows 4070 lol

Disable it in your bios to make sure. ^^''
Some people have reported this helping them immensely with the game. :P

While you are in your bios, check for a setting called "Resizable BAR" or "ReBAR", and enable that. ^^''
最后由 This PC 编辑于; 3 月 9 日 上午 10:05
#61
Danielsan 3 月 9 日 上午 11:08 
引用自 This PC：
引用自 Danielsan：
i dont know what to do, in game it shows 4070 lol

Disable it in your bios to make sure. ^^''
Some people have reported this helping them immensely with the game. :P

While you are in your bios, check for a setting called "Resizable BAR" or "ReBAR", and enable that. ^^''

i can't see that setting in bios, i can disable amd graphics only in device manager. i did but nothing has happened lol. i give up
#62
JudgeTy 3 月 9 日 上午 11:30 
Assuming you have textures on medium. Again if you used the settings the "Nvidia App" optimizes your system for... It will most def be on medium.

Also what you said about the Nvidia App makes literally no sense.

You are using this: https://www.nvidia.com/en-us/software/nvidia-app/?

Can you see the settings it's changing? Set the in game setting to that. Your system isn't good enough for High textures for 60+fps at 4k.

最后由 JudgeTy 编辑于; 3 月 9 日 上午 11:33
#63
Tully 3 月 9 日 上午 11:33 
He could have bought a 8 gig vram 4070 if that's the case he could be maxing out on vram causing fps loss.

I remember when I was playing black desert eons ago and they did a graphics update and my 980 I was using at the time maxed out on vram and I was getting a solid 0-2 fps.
#64
Danielsan 3 月 9 日 下午 2:40 
引用自 JudgeTy：
Assuming you have textures on medium. Again if you used the settings the "Nvidia App" optimizes your system for... It will most def be on medium.

Also what you said about the Nvidia App makes literally no sense.

You are using this: https://www.nvidia.com/en-us/software/nvidia-app/?

Can you see the settings it's changing? Set the in game setting to that. Your system isn't good enough for High textures for 60+fps at 4k.

Nvidia app, i use that in the link. The official.
I have to force in game the resolution to optimaze recommended settings.
i click on the green point of optimization but when i start the game i have poor performance.
I said many times, tried also 720p and lowest. Lol

by the way I am playing Flintlok at 120 fps. i gave up and waste money.
#65
Danielsan 3 月 9 日 下午 2:41 
引用自 Tully：
He could have bought a 8 gig vram 4070 if that's the case he could be maxing out on vram causing fps loss.

I remember when I was playing black desert eons ago and they did a graphics update and my 980 I was using at the time maxed out on vram and I was getting a solid 0-2 fps.

Vram is 12 in my 4070 msi 2x ventus.
#66
JudgeTy 3 月 9 日 下午 2:53 
引用自 Danielsan：
引用自 JudgeTy：
Assuming you have textures on medium. Again if you used the settings the "Nvidia App" optimizes your system for... It will most def be on medium.

Also what you said about the Nvidia App makes literally no sense.

You are using this: https://www.nvidia.com/en-us/software/nvidia-app/?

Can you see the settings it's changing? Set the in game setting to that. Your system isn't good enough for High textures for 60+fps at 4k.

Nvidia app, i use that in the link. The official.
I have to force in game the resolution to optimaze recommended settings.
i click on the green point of optimization but when i start the game i have poor performance.
I said many times, tried also 720p and lowest. Lol

by the way I am playing Flintlok at 120 fps. i gave up and waste money.


You mean you have to change the resolution in game? What does the nvidia app say the resolution should be?

What are you changing it to?

The game is not made for 720p it's not gonna help.

Is textures in game on Low or Medium?
最后由 JudgeTy 编辑于; 3 月 9 日 下午 2:53
#67
Danielsan 3 月 9 日 下午 2:53 
The only doubt i have is for directstorage, it is CPU. can i change it ?
#68
JudgeTy 3 月 9 日 下午 3:03 
引用自 Danielsan：
The only doubt i have is for directstorage, it is CPU. can i change it ?

Do you have a NVME ssd / m.2 drive?

If you do, yes, if you do not have the above, you can not.
#69
JudgeTy 3 月 9 日 下午 3:06 
Apparently the game just says CPU no matter what. And the directstorage isn't enabled fully by the game regardless.
#70
Danielsan 3 月 9 日 下午 3:12 
引用自 JudgeTy：
引用自 Danielsan：
The only doubt i have is for directstorage, it is CPU. can i change it ?

Do you have a NVME ssd / m.2 drive?

If you do, yes, if you do not have the above, you can not.

the ally x SSD so, yes..
#71
Danielsan 3 月 9 日 下午 3:26 
my settings:

bordeless window
1080p
automatic
60 capped
hdr off
vsync yes
nvidia reflex off

pc spec
cpu ryzen z1 extreme
ram 21.70
gpu nvidia 4070
vram 11.73
driver 572.70
direct storage cpu

graphics settings
cutscene low
upscaling dlss
framegen off
balance
rt off
texture low
filtering lowest
mesh medium
fur quality low
sky lowest
grass low
wind low
surface low
etc...
all settings are the lowest.

Estimated VRAM USAGE 4.33/11.73

my amd integrated graphics is always zero as usual.
4070 is used a bit, 30-50
ram is 15/18 usage
cpu usage 40-80-90
restarted new game and fan speed is Zero and 30% sometimes. Lol
vram 7gb usage now
clock 900mhz-1000mhz

Fps with this settings are now 20.
#72
JudgeTy 3 月 9 日 下午 4:35 
引用自 Danielsan：
my settings:

bordeless window
1080p
automatic
60 capped
hdr off
vsync yes
nvidia reflex off

pc spec
cpu ryzen z1 extreme
ram 21.70
gpu nvidia 4070
vram 11.73
driver 572.70
direct storage cpu

graphics settings
cutscene low
upscaling dlss
framegen off
balance
rt off
texture low
filtering lowest
mesh medium
fur quality low
sky lowest
grass low
wind low
surface low
etc...
all settings are the lowest.

Estimated VRAM USAGE 4.33/11.73

my amd integrated graphics is always zero as usual.
4070 is used a bit, 30-50
ram is 15/18 usage
cpu usage 40-80-90
restarted new game and fan speed is Zero and 30% sometimes. Lol
vram 7gb usage now
clock 900mhz-1000mhz

Fps with this settings are now 20.

My 4080super is at 89% to 99% the entire time.
Is your card not using an actual Pci-express port?
Cpu-z does it say what your Graphic Interface is doing?
Cpu-z -> Mainboard -> Graphic Interface -> Max Supported: x16 Current Link Speed 16.0 GT/s

Your DLSS
balance should be Performance or Ultimate Performance.
Def not balance.

Also change your power profile to ultimate performance
https://allthings.how/how-to-enable-ultimate-performance-plan-in-windows-11/

Your card isnt' getting enough power, isn't allowed to have enough power, or the lanes where the card is transferring information is severely capped.
最后由 JudgeTy 编辑于; 3 月 9 日 下午 4:41
#73
JudgeTy 3 月 9 日 下午 4:48 
You can try 566.36 nvidia driver, use DDU to clean the current driver you have and try replacing it with that.

The game should rebuild the shader cache. If it doesn't you'll have to manual delete it.
#74
Danielsan 3 月 10 日 上午 4:57 
引用自 JudgeTy：
You can try 566.36 nvidia driver, use DDU to clean the current driver you have and try replacing it with that.

The game should rebuild the shader cache. If it doesn't you'll have to manual delete it.

tried now and nothing happened. Only the incredible amount of time to compile shaders. I think around 30 minutes. Lol.

I downloaded benchmark and score is very low, 6200-6500.
I dont know what to do

i am not the only one
https://www.youtube.com/watch?v=SR2ZNdEKByQ&lc=UgwHF9qFjF3hAUYSd5p4AaABAg.AFA6_FsMCRbAFS-CUQJaH-

in the comments
最后由 Danielsan 编辑于; 3 月 10 日 上午 4:58
#75
< >
正在显示第 61 - 75 条，共 83 条留言
每页显示数： 1530 50

Monster Hunter Wilds > 综合讨论 > 主题详情
发帖日期： 3 月 8 日 上午 9:40
回复数： 83

讨论规则及指引