Still working for me.

Still works.

@wysit are you using Skyve (formerly Compatibility report)? if so, it might be hidden by Skyve.

Mod and hot keys worked for me, but I had to reopen the game after subscribing, else the mod didn't show up correctly in the content manager.

still work?

Both hotkeys do nothing for me. Mod is installed and active. i do have the options to change the keybindings as well but they just dont work for me

Simple function but soooo appreciated!

best mod ever

Im pressing the hotkey for both options but can't seem to get it work. I tried it on Traffic Routes and Traffic map mode.

Great mod, thank you!

I was think the game needed something like this, always hated the fact it would show red lines for traffic but when you zoom in it was moving just fine just a lot of cars going through there, thanks a lot!

Also the game Vanilla base on the number of car compare to it road, not really the speed it at.

@夕阳小新

你自己看百度地图，20km的速度也能算作不堵啊，这个只是会把真正堵的地方变红。

至于原版，就算你一条路上全是车，都以80km的速度走，它都认为是红的。

理解作者的意思，但需要灵敏度再高点（不知如何形容）。我常年车流量85~90，用这个后切换另一个模式全绿，就没有指导意义，（注意这时候并不是完全顺畅，有些地方虽然用这种算法没赌，但已经开始减速了，此时用原版交通看是红的）。或者说有相关的数据变化可以做个按钮。

I love this mod because it provides a layer of analysis that SC4 had but which was missing in CS. In SC4 you could view both 'congestion' (what this mod provides), which is the actual performance impact of heavy traffic, as well as pure 'volume' (vanilla), which is simply a report of which roads are being used most heavily. What would be a great addition would be the ability to view both relative volume (I guess this is what's provided now in vanilla?) and absolute volume which would illustrate traffic volume regardless of road capacity.

This would be helpful in understanding more clearly where the most activity is in your network.

Ok now, if there isn't much car on the road (low population) then red may not appear much. Also if you use Vanilla or TM:PE with Vehicle Disapear still on, then vehicle will disapear even before they got the change to create red road.

Speed-based mode is Vanilla report. Amount-based mode is for congestion Juntion. You start a new game, why do you expect it to be red?
If you want red, you could just use Dirt road + Grid layout.

i feel my road is missing some red... the way it calculate traffic ... i mean cars need to be very slow and like more car needed so traffic color change.

牛皮

@pcfantasy
Well, I was using it in a new save and I can't see the difference between speed-based mode and amount-based mode. What would you recommend that I do?

@MarshallMatos

Yes

It´s work in Sunset Harbor?

I had the same problem, i just turned off the mod and now i'm unsubscribing

@Sylphester
and loaded the scenario

Maybe it depends on the design of the game program, some mods do not work in scenario mode!

@Sylphester Do you think that your road are too good for it to be red :3 Or it just doesn't have enough amount of car in a spot in a really long time.

Yes - that is exactly what I mean.

And I know it should not be all green, as without the mod. Roads are all red. (or mostly red in busy area's) And with the mod in amount mode, it all remained green.

@Sylphester

Do you mean you only enable my mod, and it is not worked, all roads shows green with vehicles running on them?

Is there a debug that I can turn on, or check somewhere why it doesn't work for me?

@Sylphester

Test again on my side and it is worked.

This mod no longer works for me. Roads are always green - the 'reset tick' seems to be to high, as even in J mode the roads don't get red with loads of cars.

I tried re-installing the game and having this as the only enabled mod, and loaded the scenario Fix the Traffic that came with Mass Transit - nothing. :c

I love this mod because of the speed based coloring, as it really shows the pain-points. I need this to work.

@nhatanh0475

It is very easy, no tutorial is needed.

Thanks for the update. Now we just need a tutorial to tell how it work :)

@nhatanh0475 @nihilco @Super Sonico

New in V3.0:
Add shortcut to switch two modes, shortcut is configable in mod`s option
Shift+K speed-based mode
Shift+J amount-based mode
(1) Traffic speed-based congestion report
(2) Traffic amount-based congestion report(Vanilla mode)

@Aeri Until this mods still not update for that, just replace a road with the smalled road, if it all green then the mod is on, and if it orange or red then the mod is off.

+1 to making it clear which report view you're looking at in game :-)

@Aeri_Ghost

Nice idea, I will try to add this later.

Could you make a small display to tell which mode is active? I can only guess ;-;

Excelent, this is what i needed... thank you very much!

That is great! Thank you! will test later

@NOiZE

Function Added, use Shift+K to switch from both mode.

@MicroMan

This is not caused by my mod, something wrong in other mod make vehicleID out of range

However I will fix this error in new release, but there is still other issue in other place just not affect my mod.

And I too.

Simulation error: Array index is out of range.
at TrafficCongestionReport.Threading.VehicleStatus (UInt16 vehicleID) [0x00000] in <filename unknown>:0

贴吧前来支持

@zaltocleotl

Can you also send your save to me?

pcfantasy@qq.com

The entire contents of TrafficCongestionReport.txt is

OnLoadData
startload
OnLevelLoaded

I also am now getting "array index out of range" errors in game. Seems to be your mod.
(Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/DebugBindings.gen.cpp Line: 51)

Monthly counter values updated

(Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/DebugBindings.gen.cpp Line: 51)

Simulation error: Array index is out of range.
at TrafficCongestionReport.Threading.VehicleStatus (UInt16 vehicleID) [0x00000] in <filename unknown>:0
at TrafficCongestionReport.Threading.OnBeforeSimulationFrame () [0x00000] in <filename unknown>:0
at ThreadingWrapper.OnBeforeSimulationFrame () [0x00000] in <filename unknown>:0
at SimulationManager.SimulationStep () [0x00000] in <filename unknown>:0
at SimulationManager.SimulationThread () [0x00000] in <filename unknown>:0 [Core]

(Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/DebugBindings.gen.cpp Line: 51)


This repeats numerous times.

@Surf!

I try to fix this issue, update mod now, you can try and send me TrafficCongestionReport.txt in game folder for me to debug more about this.

@Surf!

No, it is not confict with TMPE, can you send your save , pcfantasy@qq.com

@pcfantasy

Thanks for the reply, i disabled the your mod for the moment and it fixed the issue (i'll wait for your update).

I did some research and i might be an incompatibility with TM:PE. I think it's something about the traffic jam factors being calculated by road or by lane and for some reason, if one mod calculate one in the first way and the other mod tries to get it in the other way, the error occur. It's not crashing the game but the error window pop up every second and it's unplayable. I hope you'll find some useful infos in my report.

Have a nice debug :)

@Surf!

Yes, but no other people report this issue. And this error seems impossible.

However, I will still add some logics to avoid this "impossible" errors, I will update this mod soon, please give me feedback after update.