Subscribe to download
(STS) SRB Right V 2.2

This ship is included in the (STS) Struppeys and Tatz Scenario V 2.2

This is the right SRB. You will find the left SRB here
To make this fully useable you will also need the External Tank and the Orbiter

The SRBs are the main source of thrust in the first part of the flight. You have two of them and the left one is marked by a thicker first black ring. Do not exchange them! Actually one SRB consists of several parts, which are maintained in the “Rotation Processing Surge Facility” (RPSF) and then brought to the VAB, where they are connected. In our case an SRB is a single ship. They have a total of 5 internal timers that control their ignition and disconnection as well as the slowdown afterwards. Before Lift‐Off – make sure that all timers are set up correctly! The cockpits/remote controls of the SRBs face towards the ET. So, using the camera of the SRB will be just like flying a normal ship.
Make sure to connect the Timer Block “Right SRB 1” to the Orbiters Timer “STS Launch 1” when the ships are connected.
There are three parachutes onboard, they will deploy automatically and slow the Booster down.


Mods: - none -

Scale: 1:1

Mass: 112 489,4 kg


Shortcuts:
Group 1
1 ……. ………. Atmo Maneuver Thrusters ………..…......… ON/OFF
2 ……. ………. Hydro Maneuver Thrusters ………..….....… ON/OFF
3…………..….. Camera SRB to ET………………………..…. VIEW
4…………..….. Camera Up Top…………………………....... VIEW
5…………..….. Camera Down Top……………………….…. VIEW
6…………..….. Camera Down Bottom………………………. VIEW
8…………..….. Right Boosters……………………...........…. ON/OFF
9…………..….. EMERGENCY SHUTDOWN…..…… TRIGGER NOW
WARNING: The EMERGENCY SHUTDOWN activates a Timer that will immediately switch off all
other Timer Blocks, the Gyros and the Booster Thrusters and will switch on the Maneuver
Thrusters, so the SRB will stop moving in mid air.