Steam Workshop::Platform Modules

Created by Brubaker

This is the second in a series of modules for building a space station. I hope next in the game could be the improvement of antennas. There are a lot of suggestions in the KSH forum about that. Directional radiation areas, different frequencies... Be caref...

Projector Platform Module

Created by Brubaker

This is my first contribution. It's a platform module with a projector and the new type of block - computer - There isn't any code yet. I hope in a future to add some usefull code to this blueprint. Enjoy it!...

Small Covered Walkway

Created by Brubaker

This small section allows to connect different places of our space station. It's provided with a fully charged battery to use the merge blocks. Be sure you activate it form door keypad before....

Small Walkway

Created by Brubaker

This is an exterior corridor to link your modules. Remind you have to uncheck the charge box of the battery to activate the mergeblocks....

Walkway

Created by Brubaker

This is a meddium-sized walkway to link different modules of our space station. The battery is full to activate the merge blocks....

Large Walkway

Created by Brubaker

This is the biggest walkway module in my collection. It's similar to walkaway, the design and capabilities....

Corner Walkway

Created by Brubaker

This is corner model of my walkway modules. It's very similar to the others to get the same style....

T-Walkway

Created by Brubaker

Another one module in my set of walkays....

Cross Walkway

Created by Brubaker

The last module of walkways in that set. ...

Gatling Platform Module

Created by Brubaker

This is the basic defense module for our space station. It can be upgraded with other guns....

Reactors Platform Module

Created by Brubaker

The reactors platform module has six small reactors and a lot of merge blocks and connectors. It has been designed to be in the core of your space station...

Solar Panels Array Platform Module

Created by Brubaker

This was my 2nd creation for this collection, but I had problems to fix rotors. I believed it was a bug, but I fixed decreasing Torque. Now you have a platform module to suply energy to your space station. This module has a timmer for future uses and butto...

T-Covered Walkway

Created by Brubaker

This is a new module for covered walkway in our set. The target is to have the same models for walkways and covered ones....

Gyroscope Platform Module

Created by Brubaker

This is the first platform core module I made. It has 4 gyros. You can use them to add rotation movment or help to move your space station....

Grav Gen Platform Module

Created by Brubaker

This in my opinion the module i'll place in the center of my modular space station. The grav gen is in a core platform module like others of this collection. I hope you like it!...

Command Platform Module

Created by Brubaker

This is the command core platform module for our space station....

AI Platform Module

Created by Brubaker

That's a new core platform module. This one has four programmable blocks so I called AI platform module. I hope you can configure the most codes you need for your space station, so I haven't planned to add anyone....

Trading Platfrom Module

Created by Brubaker

This module was designed in order to have a point for exchange ores, ingots, or whatever with neutral or friendly players. It has 2 computers and 2 small cargo container with a pannel button for doing the exchange of some items. Now there aren't any code. ...

Factory Platform Module

Created by Brubaker

This platform has 2 refineries and assemblers. It has also a interior turret with some ammo....

Cross Covered Walkway

Created by Brubaker

This blueprint it's similar to others in my collection....

Medical Platform Module

Created by Brubaker

This is the medical platform module. I can't say much of it, the title is very clear!!!...

Walkway Adapter

Created by Brubaker

This module is to connect covered walkways and core platform modules with other models. I hope this one will be very useful....

Beacon Platform Module

Created by Brubaker

This module has a button panel to run a code and change message of your beacon. Similar to gatling turret model....

Elevator Module S

Created by Brubaker

With this module i start vertical modules to link the others (core platform modules in that case) I'vepublished....

Covered Stairs

Created by Brubaker

This is a very useful module linked to the elevators because elevators can't link two core platform modules vertically by their own so with this module i think the problem should be solved....

Conveyor Vertical Link S

Created by Brubaker

This module has been designed to distribute along your base if you build it with several floors....

Conveyor Vertical Link C

Created by Brubaker

This conveyor model is similar to the last blueprint i published. It has been designed for the same purpose....

Landing Platform Module

Created by Brubaker

This is a landing platform for your small ships. I hope start to add my own set of small ships in a few days...

Corner Conveyor Link

Created by Brubaker

This module is the last conveyor link of this set. This very usefull to attach the gatling platform to the conveyor system of your space station, and for other designs....

S3 - Auto-Mining Drone v01

Created by Brubaker

This is the first small ship i published. I said i'm going to upload my small ship blueprints too. This one was made before programmable block update, but it works fine, so i've decided not modify it. To use rightly this drone, you should deploy it linked ...

Vertical Walkway

Created by Brubaker

With this module i've finished all kind of walkways i haved planned. Now only leave hangar platform module and cotainers module. So this is ending..... Now i'm publishing small ships to use with our space station. And i hope to upload one or two examples o...

S3 - Miner

Created by Brubaker

This ship was the first mining ship i designed. Later i designed Auto-mining drone based in this one. You can pilot this ship or drive using remote control. It has: 1- Connector 1- Gyro 1- Antenna 2- Small Reactor + U ingots 2- Drills 1- Ore detector 1- Ca...

Tiny Extension Module

Created by Brubaker

Like some words in all lenguages (and, or, not) that module it's not very amazing, it's not a great construction but it's very usefull to link the others. No one can speak without connectors as we can build a space station without some of this little modul...

Cargo Container Platform Module

Created by Brubaker

With this module we approach to the end. The last one will be hangar platform module to attach landing platform or maybe replacing landing and publishing both together. First i'm going to publish small S3 not military ship. I need to be sure all my ships a...

Collector Platform Module

Created by Brubaker

The collector platform module offers you a place where your small S3 ships Auto-Minig Drone or Miner can leave their cargo easly. With a little grav field to make the ores go in the right direction....

S3 - Grinder

Created by Brubaker

Here your are!!! My S3 - Grinder. That ship has: 2 Solar Panels + Rotors (to get max Energy and decrease its vol. to dock inside the hangar) 3 Batteries (full) 2 Small Reactors + U ingots 2 Grinders 1 Connector to dock the ship 1 Cargo Container 1 Antenna ...

S3 - Welder

Created by Brubaker

The twin brother! It's the same desing as S3 - Grinder but adapted to different missions. The other capabilitues are the same. If you prefer dowload one of them and change one welder for a grinder and you'll have a mix of both. Maybe it could be better!...

S3 - Auto-Grinding Drone v01

Created by Brubaker

A new Drone has arrived to my colection. This is a new type of drone. New Shell and new features. This one has been designed as the first one (S3 - Auto-Mining Drone) using timer blocks and sensors, not programmable blocks. It has as the previous one: - 2 ...

S3 - Auto-Welding Drone v01

Created by Brubaker

This drone has the same design as the previous (S3 - Auto-Grinding Drone) only has been changed some things in its target sensors in order to use the welders with your own ships or station or frindly ones. Also it has been replaced the grinders!!!!! I'm no...

S3 - Outpost 001

Created by Brubaker

Here you are, because my colection followers have asked for a space station example builded with my set. First chose an asteroid and plan the puropse of your station in orden to prevent your stiation grow too much. Then you have to build a base square (5x5...

SSS - Orbital Oxygen Factory Platfrom

Created by Brubaker

Wellcome to another craft made by Stardust Corporation. Stardust Space Ship has developed an orbital oxygen factory platform to refuel ship and bases while your astronauts are working on. This platform can be moved in order to follow your engineers along t...

S3 - Ranger

Created by Brubaker

I'm really proud with this ship design and appearence. The crew are 2 And it has: 4 solar panels 2 small reactors + U ingots 5 batteries (full) - i'm not sure at this moment about the number 1 timmer + computer (for future uses) 2 Missile turrets with ammo...

S3 - Sharp

Created by Brubaker

This is the first military ship I've published. It's a Destroyer. It has a armored block layer protecting all the shell. And the follow items: Command Bridge: 3 Command Seats: 1 Pilot 1 Engineer 1 Gunner 2 Small Cargo Crew Containers 1 Elevator 1 Computer ...

S3 - Medium Freighter

Created by Brubaker

This freighter is better and bigger than the light freighter I published some days ago. This one has: 2 small reactors + U ingots 8 batteries 6 solar panels 1 piston + connector 1 collector 1 gatling with ammo 1 Timer + Program block empty (for the moment)...

S3 - Light Freighter

Created by Brubaker

This is the first ship I publish. It's a small freighter. It has: 1 Interior Turret with ammo x4 1 Antenna 1 Flight Seat 1 Camera 1 Piston + Connector 1 Collector 1 Gyroscope 1 Small Reactor + 0.2 U ingot 2 Batteries full 2 Solar Panels 2 Large Cargo Conta...

Space Engineers