Subscribe to download
Hyster Laden Container Handler

Based of the Hyster H52XM-16CH Laden Container Handler, Approximately to scale with the real deal.

Supports 20' and 40' containers from the major container size standards, Classic, Nacon ISO , and AISO .

Vehicle is equipped with full automatic WASD driving, no need to switch gears, the transmission automatically handles switching into drive and reverse when the brakes are held down.

Please note: due to the weight/weight distribution and rear steer nature of the vehicle, it is not very straight-line stable at high speeds, do not attempt high speed cornering maneuvers with or without a load.

Press 1 to engage the headlights, 2 to engage the handbrake (can be used at any speed) or 6 to turn on the flood lights.

The mast is controlled with the arrow keys, up and down raises or lowers the mast, while left and right controls the tilt. The mast has enough reach up to 5 containers high, each at 12 blocks of height, and enough power to pick up a full 20' tanker container. If you hold down the '5' key and use the left and right arrow keys, the spreader side-shifts up to 0.5 meters in either direction for fine control. Use the markings on the spreader in conjunction with the thick half of the pistons to realign it to center.

The vehicle has a switchboard located to the right of the driver that controls the size of the spreader for different sized containers. In order from left to right, it switches from classic (24/48), Nacon (28/56) and AISO (27/55) sizes. 20' and 40' sizes from each standard are placed next to each other in order to make switching container sizes within the same standard easily. When switching from classic to Nacon/AISO standards, the spreader automatically switches to 11 block width and vice versa when changing back. However, you can manually switch from 9 to 11 wide if desired.

Note: The spreader is 1 block seperated from the mast, so therefore the maximum trailer or platform size you can place a container onto cannot be more than 2 blocks wider than the container (For example, 11 wide container on 13 wide trailer)

The container grabber is controlled with the 3 key, which switches it from ready (will connect) to release (will not connect) with indicator lights as such. With the Nacon ISO standard only, pressing 4 in the same fashion will disconnect the connectors on the bottom of the container to separate a container from a stack or vehicle.

Note: Occasionally the linear track bases will glitch out and not switch to 40' sizes after carrying a 20' around. If that happens, move the mast or vehicle around and it will eventually glitch it back into operation.

Containers used for the images can be found in the Nacon ISO and AISO links, the truck is the Falcon F1235 ACE with the Mammoth ST410 trailer.