Steam Workshop::Kuat Drive Yards

Created by PrimoSuperT

Low Altitude Assault Transport/infantry The Low Altitude Assault Transport/infantry (LAAT/i), often referred to as the Republic attack gunship or Republic Gunship, was a specialized gunship designed for aerial-based support and infantry transportation. It ...

[New Version Available!] Low Altitude Assault Transport [Prfct] LAAT

Created by Purrfect-Blinky

FOLLOW THIS LINK Star Wars Replica - Vanilla Build HOW TO USE: Flying is a bit interesting as we have a stack of 3 pistons, so make sure you lock your doors in place with the landing gears provided in the back. (It will stil drag as there will still be 4 p...

Star Wars: Lambda-class T-4a Shuttle (Vanilla)

Created by Digital Soul

Lambda-class T-4a Shuttle The Lambda-class T-4a Shuttle from Star Wars in it's troop transport form. It got only one cockpit block in the ships cockpit (not as in the films 6), but 8 Passenger Seats in the back for your troops and a lot of cargo space. The...

STAR WARS : THE CLONE WARS SHIPS (Shuttle and ARC-170)

Created by Charly1138

Hi everyone ! Here you can find two ships inspired by the series STAR WARS : The Clone Wars. - The Attack shuttle (the ancient version of the Empire shuttle you can see in Star wars 6) - The ARC-170, one of the main Republic Starfighter during the clone wa...

Ebon Hawk - Interior, relative scale, functional, no mods

Created by Digi

Me and my friend's vision of the Ebon Hawk from Star Wars Knights of the Old Republic (KOTOR), was designed with the interior as focus. It's completely vanilla, no mods. Has 2 refineries (one in the engine room), a large reactor, 2 batteries, an assembler,...

Corona Class Transport (NO MODS)

Created by Dolan

The Corona Class Transport is a quick, jump capable cargo ship designed to provide efficient and reliable transportation for cargo and passengers. It's small hangar can support shuttles as well as cargo. The stock model can land on planets up to .90 G, wit...

Star Wars Vigil-Class Corvette (No Mods)

Created by Dastex

Produced by Kuat Drive Yards for the Imperial Navy, the Vigil class was considered the smallest vessel in the iconic Star Destroyer line of ships...

STAR WARS Raider-Class Corvette

Created by JP_2793

The Raider-class corvette was a sleek and roomy vessel at 150 meters for a sizeable crew and featured 3 engines and a hyperdrive. These ships could be operated with a pilot and a co-pilot and were armed with ion cannons, dual heavy laser cannons, concussio...

Star Wars [Purrfect] Imperial Gozanti Class Cruiser

Created by Purrfect-Blinky

Tie Fighter Transport, With Tie-Fighters Included! Republic Version here *From the Holonet* The Gozanti-class cruiser was a starship that could act as a freighter and cruiser. It sported a twin laser turret in a dorsal mount and a heavy laser cannon on its...

Star Wars [Purrfect] Gozanti Class Cruiser

Created by Purrfect-Blinky

The Gozanti, Republic Style! Imperial Tie-Fighter Version here Got all the things, Hangar, Bridge, Cargo Dock, Jump Drive... and sprinkled with bits of Star Wars... ow well... You guys know me by now. Gozanti-class cruisers were introduced by Corellian Eng...

Republic Cruiser, Star Wars

Created by ljames

Ship from Star Wars Episode 1. Full Interior. Flies pretty good. Includes detachable escape pod, see screenshots. The ship can be copied and pasted and the detachable pod goes with it. You have to remove the blue block connecting the pod to the ship to det...

Star Wars [Purrfect] c70 Imperial Retrofit

Created by Purrfect-Blinky

The Consular-class cruiser (Charger c70 retrofit), also known as the Republic frigate, was a starship developed for the Galactic Republic during the Clone Wars. It consisted of a converted Consular-class space cruiser adapted for combat, with a new battle-...

Pelta-class frigate (Vanilla)

Created by Dastex

...

Marauder-class corvette [Vanilla]

Created by Train Baron

NOTE It's not 1:1 scale it's from Star wars. The Republic (Clone wars) Can fly even if it's heavy damage Stats: Small Ship Weight: 93 tons Weapons: 4 Gatling Turrets 3 Rocket Launchers Equipment: 2 Cockpits 1 Large Reactor 1 Oxygen Generators 2 Hydrogen ta...

Hammerhead Corvette (1:1 scale)

Created by ferdiheld

Mini Update for the Hammerhead: - added (working!) escape pods. To use them enter the cockpit mounted on the floor of the pod and activate the timer for launch - added kitchen area - improved the commander's observation deck Created by 5tuka and ferdiheld ...

Imperious Class Corvette (Star Wars) (Fan made)

Created by Transylvestite

Made in the waning years of the clone wars, the Imperious-class corvette was one of the only ships not mass produced by the Republic and was integral to the then chancellor palpatines exploration of the unknown reigions. with a complimentary of powerful th...

Acclamator Assault Ship (Blueprint)

Created by _unauthorised_

Acclamator-class Assault Ship from Star Wars - No mods - Small scale (120m) - Oxygen system - Conveyor system - Jump Drives - Works in atmosphere - Works in survival I recommend using this weapon mod: (DX11) Star Wars Weapons And More http://steamcommunity...

Star Wars - Acclamator Assault Ship

Created by sauron2012

Produced by Rothana Heavy Engineering, Acclamator Class Assault Ship is a frigate size transport ship unit in service of Galactic Republic navy. First of it's kind after thousands of years, Acclamator was triangle-shaped assault ship, produced for new form...

Star Wars Arquitens I Light Cruiser

Created by sauron2012

Produced by Kuat Drive Yards, Arquitens Light Cruiser were one of the most produced Cruisers specialy for the Jedi, also knowed as Jedi Cruiser. When Clone Wars has begin, Arquitens were now produced as light support for Acclamator, and Venator Cruisers. T...

Republic Arquitens-class light Cruiser

Created by Dastex

Republic light Cruiser and later the Imperial light Cruiser ...

STAR WARS Nebulon-B Frigate (No Mods)

Created by Vollstrecker

The EF76 Nebulon-B escort frigate was a capital ship designed and developed by the Kuat Drive yards for the Empire preceding the Galactic Civil War in response to raids by rebels on Imperial convoys. It was a smaller, less expensive ship than the Star Detr...

Imperial Outpost AUREK v2

Created by CharG!

Howdy once again folks. Here is a repost of my Imperial Outpost Aurek in a much more finished version with working turbolifts. Outside sits a Modified Nebulon B2 Frigate as seen in the game TIE - Fighter. I have seen numerous versions of the Nebulon B Frig...

Star Wars - Imperial I Star Destroyer

Created by sauron2012

Produced by Kuat Drive Yards, Imperial I Class Star Destroyer is most popular capital ship unit in service of Galactic Empire navy. A symbol of the Empire's military might, the Imperial Star Destroyer carries devastating firepower and assault forces anywhe...

Small Venator-Class Star Destroyer

Created by _unauthorised_

All Star Destroyers in Steam Workshop are massive and impractical so I decided to make a small star destroyer. Venator Class Star Destroyer - Oxygen system - Conveyor system - Jump Drives - Hangar - Energy shields My Imperial Star Destroyer: http://steamco...

Venator-class Star Destroyer

Created by off baseline

"The Venator-class Star Destroyer, also known as a Republic attack cruiser or Jedi Cruiser, was a dagger-shaped capital ship used by the Galactic Republic for ship-to-ship combat, capital ship escort, and fighter carrying against the Confederacy of Indepen...

::: STAR WARS ::: VICTORY I class (Sternenzerstörer/ StarDestroyer)

Created by JoKeR

Ready for Survival-Mode! Wie immer alles miteinander verbunden, Waffen laden automatisch nach. (Wenn Munition vorhanden) Von der Größe her an meine anderen Workshopinhalte angepasst. (Er ist der Kleinste. ^^) Kleiner Hangar vorhanden, und Zugriff auf Lager...

Imperial Victory II Star Destroyer (Vanilla)

Created by Abuu

It's not 1:1, but it's survival ready. The hangar bay can fit 4 of Purrfect-Blinky's Tie-Fighters without any need to Wiggle them in. Evrything is piped up, and the ship is airtight (unless you get a hullbreach). The Victory II class Star Destroyer was des...

Victory II Class Frigate (Star Wars) (Vanilla)

Created by Transylvestite

Used by both the Galactic Republic and the Galactic Empire, the Victory II-Class Frigate was used as a support vessel, accompanying the larger Star Destroyers. The two wing like extensions near the back were presumably used for atmospheric manuverability. ...

Praetor-Class Battlecruiser

Created by HvyArtilleryBTR

A formidable warship with a hanger that can hold 6 small ships, 2 drone bays, a drone command center, 2 sickbays, crew quarters, a recreation lounge, detailed engineering and storage room...

Star Wars Bellator Class Star Dreadnought [OUTDATED]

Created by ImDirtyDan

The Bellator Class Star Dreadnought is a scaled down version of it’s predecessor, the Mandator I Class Star Dreadnought. At 7.2 km in length, it packs a huge punch, decimating entire fleets of these traitors to the Empire. I made it to be 10% of the actual...

eclips class-star dreadnought

Created by LordSiege

the eclips for all you starwars fans :D and a little info The Eclipse-class vessels were among the largest dreadnought-scale ships/Super Star Destroyers ever to be fielded within Galactic history. Although technically being dwarfed in length only by both t...

Star Wars Medical Station (No Mods)

Created by Perksimis

Hi guys it’s me again and I bring you the Haven-Class Medical Station from the Clone Wars. Known as the Republic medical station, was a space station that was capable of holding 80,000 patients. There were twenty known in the galaxy. I built this station 1...

Star Wars Tallie Lintra RZ-2 A-Wing

Created by sauron2012

Produced by Kuat System Engineering, RZ-2 A-Wing was second version of most knowed Rebel Interceptor A-Wing. New version were equipment with better engines and new antena with function to block enemy radars against fighters. RZ-2 were produced specialy for...

Star Wars - ETA-2 Actis Anakin

Created by sauron2012

Produced by Kuat Systems Engineering, ETA-2 Actis Interceptor was a light starfighter used in service of Galactic Republic. Light and compact, ETA-2 were perfect personal Jedi ships and great dogfighters against any enemy starfighter. Thanks to support of ...

Star Wars Boba Fett Slave I

Created by sauron2012

Produced by Kuat System Engineering, Firespray were prototyped Patrol Fighters. When knowed Bounty Hunter, Jango Fett escaped from Militia forces, he decide to stole one of Firespray, and rest destroy. This last were most iconic Bounty Hunter ship, Slave I...

Star Wars Jango Fett Slave I

Created by sauron2012

Produced by Kuat System Engineering, Firespray were prototyped Patrol Fighters. When knowed Bounty Hunter, Jango Fett escaped from Militia forces, he decide to stole one of Firespray, and rest destroy. This last were most iconic Bounty Hunter ship, Slave I...

Star Wars - Alpha-3 Nimbus V-Wing

Created by sauron2012

Produced by Kuat Systems Engineering, Alpha-3 Nimbus V-Wing Interceptor was a light starfighter used in service of Galactic Republic. Sharp and compact, V-Wings were perfect support ships to larger and heavier ARC-170 and great dogfighters against lighter ...

Star Wars RZ-2 A-Wing

Created by sauron2012

Produced by Kuat System Engineering, RZ-2 A-Wing was second version of most knowed Rebel Interceptor A-Wing. New version were equipment with better engines and new antena with function to block enemy radars against fighters. RZ-2 were produced specialy for...

STAR WARS TIE Fighter (Outdated) *ORIGINAL*

Created by Vollstrecker

**NEWER VERSION HERE** The TIE, or Twin Ion Engine, Fighter. The work horse and unbranded symbol of the Imperial war machine. The sight, and moreover, sound of which struck fear in the heart of anyone unfortunate enough to be caught in it's targeting lock....

STAR WARS TIE Interceptor (Outdated)

Created by Vollstrecker

**NEWER VERSION HERE** The TIE/IN, or TIE Interceptor, was introduced only a few years after the establishment of the Empire and was a direct descendant of the technological upgrades that defined the TIE Advanced. The TIE Advanced proving too costly to pro...

Star Wars [Prfct] Tie Striker

Created by Purrfect-Blinky

...

Star Wars [Purrfect] TIE-Silencer

Created by Purrfect-Blinky

Pew pew! Ben said as his mother came into the room. ''Are you playing with your silly airplanes again Bennie?" Leia Inquired... and so... the first order was subdued with a snarky comment from the resistance... the End. Have fun with this Last Jedi Craft r...

Star Wars [Purrfect] TIE-Punisher

Created by Purrfect-Blinky

The Punisher, the biggest Tie ever build, with firepower so great, Rebels will run in fear on sight of this beast! The empire will reign supreme, long live Emperor Palpatine! Long live the Empire!...

Star Wars [Purrfect] Alpha-Class Xg-1 Star Wing

Created by Purrfect-Blinky

A algamation of a Hornet, X-wing and a lambda Shuttle, this missile platform will make sure clang will find it's way into your heart. The Star Wing was build to chase those pesky Starfleet Shuttles full of redshirts out of imperial territory. Also the occa...

Star Wars [Prfct] Delta-7 Aethersprite

Created by Purrfect-Blinky

Star Wars Build - Vanilla Replica If you have any suggestions about the build, on accuracy, description and armament, please leave a comment, I am open to these kinds of things for ships that are fairly untouched by the franchise. Star Wars Fleet Roadmap: ...

Z-85 Headhunter [Prfct]

Created by Purrfect-Blinky

Star Wars Build - Vanilla Replica Welcome to the clone ware pre-cursor of the now infamous z-95 headhunter. This ship was used late in the clone wars as a chep to produce but reliable starfighter. Going in production and being continuesly developed it rese...

Star Wars [Purrfect] Speeder Bike

Created by Purrfect-Blinky

VERY survival ready... Wow... most functional ship yet. ;)...

Star Wars: Coruscant Air Taxi (Vanilla)

Created by Digital Soul

Coruscant Air Taxi The Coruscant Air Taxi was a well known ferry in Coruscant and the most common vehicle used in town. It had just a maximum Flightheight of 3,4 km, but could reach a maximum speed of 191 km/h. The special thing about it's passenger seats ...

TX-130 Saber Tank (Republic)

Created by BlackArmor

UPDATE: Fixed wheels falling off when spawning No mods. Survival friendly (guns and reactors pre-filled) Big thanks to captainfructose for the video! Description: This is a replica of the TX-130 Saber tank used by the Republic during the clone wars. It "ho...

Star Wars HAVw A6 Juggernaut Tank

Created by sauron2012

Produced by Kuat Drive Yards, HAVw A6 Juggernaut Turbo Tanks were main tactical command unit on the battlefield planets. Carry by Venators, Juggernauts can be used as land mobile base or very heavy support for troopers. Very good top speed and heavy rocket...

AT-PT (Not to scale)

Created by Wreckeronezero

As seen in the expanded universe of Star Wars and built by Kuat Drive Yards, the All Terrain Personal Transport is a light anti-infantry walker. Standing at 4 meters high, its a smaller walker. Armed with a twin laser cannon it can shred groups of infantry...

[Prfct] AT-ST Imperial Walker - Outdated

Created by Purrfect-Blinky

Star Wars Replica Build - Vanilla Press 4 to unlock safety, then 1 for going forward, 2 to turn left (while disableing 1) and 3 to go right (same principle) Rotors are for the head to turn, toggle to move. I hope you all enjoy this engineering nightmare! (...

[Outdated] Star Wars AT-TE Redesign

Created by D3LT4-07

NEW VERSION: https://steamcommunity.com/sharedfiles/filedetails/?id=2471650911 Hello Co Engineers! BETTER WALKING! BETTER TURRETS! BETTER DESIGN! I put some more hours into my AT-TE and improved its design and functions. The turrets have been completely re...

Space Engineers