No Man's Sky 无人深空

No Man's Sky 无人深空

查看统计:
DaughterOfBast 2019 年 8 月 21 日 下午 9:58
quad foundation strut/foundation strut..missing?
So, I bought the quad foundation strut and the foundation strut blueprints off the construction research vendor in the anomaly. It shows they are purchased, they show up in the catalogue as acquired, but I cannot find them on the Z menu. I have looked at everything. I found several older posts that this was an issue of them being missing; Has anyone figured out how to find them in the Z menu, or is it a bug and they are still missing (the posts were from a year ago). I would dearly love to build high above ground to negate the intrusion of nature into my abode. Thank you!
< >
正在显示第 16 - 30 条,共 35 条留言
tobybug 2019 年 8 月 30 日 下午 8:52 
引用自 Sparrowhawk
I was having the same issue. I bought the foundation strut in the Nexus and could NOT find it in my construction menu. It is showing up now, but regrettably I have no idea why! I have a suspicion it might be because I finally unlocked enough cuboid pieces to have triggered something in the system to make it show up, but until then....it just wasn't there, and I have no way of proving this was the issue.
I'm having the same issue and I wish I knew what happened to you. Does anyone know how to submit a bug report?
Xrande 2019 年 8 月 31 日 上午 5:10 
Anyone managed to solve this? Please submit bug report.
https://hellogames.zendesk.com/hc/en-us/requests/new


This is my report:
-----------------------------------
I have purchased a number of blueprints but it is now showing up in build mode. Specifically it is the foundation struts.

I press Z -> Specialist -> Foundation. Only the following show up:
1. Cuboid Room Foundation Strut
2. Paving
3. Paving
4. Cylindrical Room Frame
5. Foundation

Missing are:
1. Foundation Strut
2. Foundation Strut Quad
3. Paving (Tall)
SpreadItOn 2019 年 9 月 6 日 上午 11:03 
From what I've found, you can't build the strut first and then put a building on top. What you can do is if you build the first room of your base on a hill or slope, then attach a corridor and another room off of it that's hanging out in the air, you can then go outside, under the hanging room and attach a "foundation" which will automatically deploy struts. From what I can tell this is strictly cosmetic. Also, if you leave and come back to your base with struts, most of the time the struts will not extend all the way down to the ground anymore; you have to delete the foundation and then rebuild it for the struts to touch the ground.

https://steamcommunity.com/sharedfiles/filedetails/?id=1855600011
最后由 SpreadItOn 编辑于; 2019 年 9 月 6 日 上午 11:09
J.A.R.R.E.L.L.O 2019 年 9 月 9 日 下午 6:18 
I am having this issue as well, only the small struts appear and the large cylinder strut/frame. I researched all the recipes for both large and small structures afterwards and they still did not reappear. I hope i don't have to restart because im already pretty invested into this save file and found a nice planet for my base.
Azure Fang 2019 年 9 月 10 日 下午 7:20 
引用自 SpreadItOn
From what I've found, you can't build the strut first and then put a building on top. What you can do is if you build the first room of your base on a hill or slope, then attach a corridor and another room off of it that's hanging out in the air, you can then go outside, under the hanging room and attach a "foundation" which will automatically deploy struts. From what I can tell this is strictly cosmetic. Also, if you leave and come back to your base with struts, most of the time the struts will not extend all the way down to the ground anymore; you have to delete the foundation and then rebuild it for the struts to touch the ground.

https://steamcommunity.com/sharedfiles/filedetails/?id=1855600011
Based SpreadItOn. This is indeed it. Just deployed a foundation under a round and it created struts itself after it built. Thank you for ending my pain, good sir.
telepwN! Free 2019 年 9 月 11 日 下午 11:43 
I’ve been having this same problem, but they finally showed up tonight! I hadn’t bought any blueprints for small prefab rooms, and as soon as I did, everything showed up in the build menu properly

Since they only appear to snap to the smaller rooms, my guess is that it’s an unlisted requirement for building them. Otherwise, they’re unbuildable anyways
Ocean Child 2019 年 9 月 14 日 上午 6:06 
It works for the round and the small cuboid but I'm having the same problem with the large quad and single strut foundations. I've purchased every single building blueprint available in the Nexus and specifically the ones missing from the menu are the same as Xrande submitted in the bug report. I even placed a large square room in the side of a hill and tried to put a foundation under it after it was built, but the foundation is simply not there to be had. Missing. It is beyond annoying. :/
Amirus 2019 年 12 月 15 日 下午 1:11 
I also thought I need to place the struts but after I bought the "Foundation Strut Squad" and then placing a "Foundation" underneath a square room, it automatically put the struts symmetrical instead of ugly like before.

I guess you need to buy the "Foundation Strut" to just have them appear but I can't test cause I already bought it and don't want to make a new game just for that.

The Cylindrical Room Frame is something you can place on the ground and then put a room on top of it.
If you wanna have those big ugly things underneath it, that is.

Note: Removing the foundation under a room will also remove all windows and glass panels but you get the material so don't freak out.
But that deserves another forum.
Mozzy 2019 年 12 月 15 日 下午 1:53 
Same problem - quad and strut not showing up any menu, anywhere. Am on regular v2.23, but both normal and permadeath modes, same missing pieces.
mthadius 2020 年 4 月 21 日 上午 10:56 
Same thing here.
Dingo 2020 年 7 月 7 日 上午 10:11 
I've just tried adding the parts to my list with the save editor and even thats not working
Dingo 2020 年 7 月 9 日 上午 8:09 
FYI: I have sent the NMS devs a message about this issue
Devilin Pixy 2020 年 7 月 9 日 上午 8:21 
When you go to the Construction Terminal on the Anomaly, make sure to buy the blueprints for the Struts (single/quad) in the Small Prefabs section and not from the Large Prefabs section. They are for some reason listed in both sections, but only the ones from the Small Prefabs section will appear in your Build Menu.
Mr. Bufferlow 2020 年 7 月 9 日 上午 8:47 
Not sure if this will help, but you have to build a round or rectangle room first and then add it to the room...you can't just place it by itself....kind of like the doors work.
|TCO| Nunya 2020 年 10 月 17 日 下午 6:45 
this bug is over a year old and they have done nothing to fix it.
< >
正在显示第 16 - 30 条,共 35 条留言
每页显示数: 1530 50

发帖日期: 2019 年 8 月 21 日 下午 9:58
回复数: 35