Space Engineers

Space Engineers

Not enough ratings
Modular Stations Pack V1
   
Award
Favorite
Favorited
Unfavorite
Description
This is a pack that contains all of my modular station modules for building large stations from predesigned modules that perform different tasks. All of the modules, when connected, will have fully connected piping, pressurize independently, and some of them are preconfigured for use with scrips such as TIM. Here is a list, and breif description of those modules.

Uploaded/Built and Ready For Upload
- Command Module: Control module with antennae, lots of windows, TIM Script programmable block and timer with LCDs displaying quotas and inventory status of most items. This module also contains the master assembler that will control the slave assemblers of the assembler modules.

- Refinery Module: Contains 20 fully speed upgraded refineries, as well as similar numbers of oxygen generators and arc furnaces. All of the refineries and arc furnaces have been preconfigured to work with TIM.

- Assembler Module: This module is packed full of speed boosted assemblers to facilitate rapid fabrication of parts to expand the station. All of the assemblers in these modules have cooperative mode manually enabled so that they will all immediately slave to the master assembler in the command module when this is connected.

- Power Module: Contains 13 large reactors, and is packed the rest of the way to the brim with batteries to store any unused power and buffer large demands, as well has help with storage for the solar system

- Storage Module: Contains 13 large cargo containers and a handful of oxygen tanks.

- Hydrogen Storage Module: Should contain 13 large hydrogen tanks but one of the engineers says the he may have dropped one. Actual number may vary.

- 1-3-2 Connector Hub and Extension: Extensions and connection hubs for the 1-3-2 connector syles for external systems like turret pods and solar arrays. They are not, however, accessible by characters (they have no interiors like modules that use the 3-4-3 connectors).

- Hub: Has four connectors for large modules (3-4-3) on the sides and one 1-3-2 connector on the top and bottom.

- Gatling and Missile Pods: Different versions of the same weapons pod. One contains guns, the other contains the funny looking rocket thingies.

- Module Shell: A completely empty standard 3-4-3 module for you to do as you like with. Please note that this does not come pre-plumbed, so if you want to have inventories accessble on either side of this pod, you will need to run the piping yourself.

Planned:
[CANCELLED - MOVING ON TO V2 FOR IMPROVED CAPABILITIES]

FULL CREDIT TO TALADEN FOR THE INVENTORY MANAGEMENT SCRIPT USED IN THESE DESIGNS! THE ORIGINAL SCRIPT CAN BE FOUND HERE: https://steamcommunity.com/sharedfiles/filedetails/?id=546825757
Items (10)
[No Mods] Modular Stations V1 1-3-2 Connector Hub
Created by Shida
This is a connector hub for the 1-3-2 connection ports on my Modular Stations modules....
[No Mods] Modular Stations V1 - Command Module (3-4-3 Connector)
Created by Shida
This is the first uploaded segment of my Modular Stations V1 pack, a set of connectable modules that can be used to fabricate large stations from smaller segments, such as refinery modules, power modules, connector hubs, turret pods, fabrication facilities...
[No Mods] Modular Stations Assembler Module (3-4-3)
Created by Shida
This is an assembler module packed full of speed boosted assemblers based on the Standard Module Hull for my Modular Stations collection found here: http://steamcommunity.com/sharedfiles/filedetails/?id=1276042584...
[No Mods] Modular Station Gatling Pod (1-3-2 Connector)
Created by Shida
This is a gatling turret pod built for the 1-3-2 external equipment connector system on my Modular Stations modules, which can be found in this collection: http://steamcommunity.com/sharedfiles/filedetails/?id=1276042584...
[No Mods] Modular Stations 1-3-2 Extension Connector
Created by Shida
This is a 7 block extension connector for the 1-3-2 external systems connection points on my Modular Stations V1 modules which can be found in this collection: http://steamcommunity.com/sharedfiles/filedetails/?id=1276042584...
[No Mods] Modular Stations V1 Connection Hub (3-4-3[x4]) (1-3-2[x2)
Created by Shida
This is a hub used to connect multiple modules of the Modular Stations pack, with 4 large connector points on the sides, and one small 1-3-2 external systems connection point on the top and bottom. It also contains batteries, and full plumbing to connect a...
[No Mods] Modular Stations V1 Hydrogen Storage Module(3-4-3)
Created by Shida
This is a module that contains ~12 hydrogen tanks, as well as a healthy sprinkle of oxygen tanks. It's designed to work with the 3-4-3 connection points on modules of my Modular Stations V1 collection, found here: http://steamcommunity.com/workshop/filedet...
[No Mods] Modular Stations V1 Module Shell
Created by Shida
This is a blank, empty, un-plumbed standard module for you to do as you like with to create your own modules to work with my Modular Stations V1 pack: http://steamcommunity.com/workshop/filedetails/?id=1276042584...
[No Mods] Modular Stations V1 Power Module (3-4-3)
Created by Shida
This is a power generation module for my Modular Stations pack containing 13 large reactors, and a load of batteries to store unused power, and buffer demand spikes. http://steamcommunity.com/workshop/filedetails/?id=1276042584...
[No Mods] Refinery Module (3-4-3)
Created by Shida
This is a module containing 20 fully speed boosted refineries, and comparable numbers of oxygen generators for my Modular Stations V1 collection: http://steamcommunity.com/workshop/filedetails/?id=1276042584...