Subscribe to download
【C-Tech】Static Merge-Engine Type II（静态磁力引擎2型）

This new engine can achieve the following functions:
1.The energy consumption of the engine is almost zero when the spacecraft is moving，and when the mass of the spacecraft is small，the acceleration will increase as the mass increases.When the mass exceeds a threshold, the acceleration remains unchanged.
2.Space anchoring——Whether the spacecraft is located in the gravity circle of the planets and regardless of the mass, it can automatically decelerate to zero in a very short period of time, and remains almost stationary near a coordinate point.
3.The spacecraft can resists gravity when moving at a preset speed,the gravity of the planet will not deflect it from its course.
4.Autoland——the spacecraft can automatically approach the surface of the planets (asteroids) in a selected direction, and automatically shut down the engine when it is about to contact the planets (asteroids).
5.The spacecraft can automatically measure the coordinates of the center point of the planet，and can follow the orbit of a specified shape(We can program the shape of the orbit,such as rings, spherical spirals, even squares and so on).The spacecraft can switch its flight mode when flying along the orbit:Mode 1(Static flight Mode):The orbit will not change when the spacecraft changes its orientation.Mode 2(Dynamic flight Mode):The orbit will change when the spacecraft changes its orientation(The orbit will always tangent to the orientation of the spacecraft,and the radius of the orbit remains unchanged).

Baidu Post Bar tutorial link: https://tieba.baidu.com/p/5638894379
Youku video link: v.youku.com/v_show/id_XMzUyMzA4ODQ3Ng==.html
BILIBILI video link: https://www.bilibili.com/video/av21831658/
The archive of the Static Merge-Engine Type II: https://steamcommunity.com/sharedfiles/filedetails/?id=1355864633

Key operation instructions:
The first group of keys:
Key 1,Start the Engine.
Key 2,Shutdown the Engine.
Key 3,Switch the flight mode:Inertia dampeners On/Cruise Mode/Inertia dampeners Off.
Key 4,Change the cruise speed when in Cruise Mode.
Key 5,Make the spacecraft fly along the orbit.
Key 6,Switch the orbit-flight mode(Mode 1,Mode 2).
Key 7,Camera.
Key 8,Rockets.

The second group of keys:
Key 1,Autoland Mode On/Off.
Key 2,(Landing Gears)Autolock On/Off.
Key 3,(Landing Gears)Switch lock.

Note:
1.In the first group of keys,we must first press Key 1 to start the engine,then you can press "A W S D Space C"to Control the engine move around.We can press Key 2 to shutdown the engine,press Key 3 to Switch the flight mode(Inertia dampeners On/Cruise Mode/Inertia dampeners Off).
2.When in Cruise Mode,you can press Key 4 to Change the cruise speed(There are five preset speeds,0/5/20/50/75/100m/s).
3.If the spacecraft is not in the gravity circle of the planets,when you press Key 5 and 6 in the first group,the spacecraft will remains stationary.If the spacecraft is in the gravity circle of the planets,when you press Key 5 and 6 in the first group,the spacecraft will fly along the orbit in Mode 1 or 2.
4.If you want to land on the planets(asteroids),you can first press Key 1 in the second group to start the autoland mode,and drive the spacecraft near the surface of the planet or asteroid, it will automatically shut down the engine wh and use the landing gears to absorb the surface of the planets(asteroids).


这款新式引擎能够实现如下功能：
1、几乎0能耗实现各方向加减速，且船体加速度与直连物体（直连指的是通过方块连接，而非通过转子、起落架或活塞连接）的质量呈特殊线性关系（当船体质量较小时，加速度随着船体质量增加而增大，当船体质量超过一个特定阈值后，加速度维持不变）；
2、空间锚定功能——即不管是否位于重力圈，不管船体质量多大，都能在极短时间内自动减速为0并稳定维持在停止点静止不动，而且几乎不消耗任何能源，不需要安装任何推进器或质量方块；
3、能够实现抵力巡航功能——即能够在地球重力圈的环境中或者一定程度的外力下，保持稳定的平直轨道匀速前行而不发生偏移；
4、自动降落功能，能够按照选定的方向自动贴近星球（陨石）表面并在快接触时自动关闭引擎；
5、能够自动探测星球中心并按照特定轨道运行（轨道根据编程可以为环形、球面螺线、甚至正方形等。。），并且可以任意切换轨道运行状态：1、静态环轨模式：运行期间飞船可随意调整朝向而不会改变运行轨道，2、动态环轨模式：飞行期间轨道方向能够随着船头的朝向实时改变，但是轨道半径保持不变。

百度贴吧教程链接：https://tieba.baidu.com/p/5638894379。
优酷视频链接：v.youku.com/v_show/id_XMzUyMzA4ODQ3Ng==.html
BILIBILI视频链接：https://www.bilibili.com/video/av21831658/
作品存档(Static Merge-Engine Type II)地址是：https://steamcommunity.com/sharedfiles/filedetails/?id=1355864633。

键位操作说明：
第一组键位：
1 开启引擎
2 关闭引擎
3 飞行模式切换，按下后分别切换至惯性抑制打开\定速巡航模式\惯性抑制关闭3种运行模式
4 切换定速巡航模式下的预设巡航速度
5 进入环轨运行模式
6 切换环轨运行模式，按下后分别切换至动态环轨模式\静态环轨模式
7 摄像头
8 火箭筒
第二组键位：
1 开关降落检测模式
2 开关起落架自动锁定
3 切换起落架锁定状态

具体操作方法，首先，第一组，按1键打开引擎，打开后按AWSD空格C可以前后所有上下飞行，按2键关闭引擎,按3键切换惯性抑制的，按3键能够切换3种不同的飞行模式，分别是惯性抑制打开（Iner-damp On）\定速巡航模式(Cruise mode)\惯性抑制关闭（Iner-damp Off）3种运行模式。在定速巡航模式（Cruise mode)下，按4键可以切换预设的巡航速度，每按一次，速度就提高一档，共分5档，分别是0、5、20、50、75、100M/S，当达到100M/S后再按一次，速度又会归零。5键是进入环轨道运行模式。6键切换环轨运行模式，按下后分别切换至动态环轨模式\静态环轨模式，5、6键需要飞船在星球重力场内才能实现，如果检测不到重力场，飞船则静止。
第二组键位：1键是开关降落检测模式，当打开降落检测模式后，分为两种场景：1、在星球表面降落，程序检测降落伞的状态，一旦降落伞到达指定开伞高度（一般设为30米），程序就会自动关闭引擎，飞船依靠星球重力自动降落星球表面并依靠起落架自动吸附星球表面。2、在陨石表面降落，船体先以较慢的速度靠近陨石，并且周围的传感器打开，一旦陨石进入传感器范围，传感器就自动关闭引擎，船体以惯性贴近并依靠起落架自动吸附陨石表面。