Stormworks: Build and Rescue

Stormworks: Build and Rescue

VForce VT12 | 12 Speed Automated Truck Transmission
51 Comments
PsychoticPunk  [author] Jul 11 @ 10:44am 
I've been using it recently and havent had any issues. What this sounds is that the "occupied" signal going into the TCM could have been incorrectly connected, as its the only signal that would directly prompt the transmission to go back into neutral besides using the gear selector.
OG Jobby Bobbson Jul 9 @ 10:43am 
Stays in neutral and doesn't shift out. Using the vForce 15.8L diesel along with it. Have everything wired into the ECM and ON Signal. Gearbox will briefly light up "R" for reverse than switch right back to neutral.
PsychoticPunk  [author] Jun 6 @ 10:09am 
Ok
Chestersoad Jun 6 @ 9:24am 
I cant make it work
PsychoticPunk  [author] May 29 @ 2:12pm 
what ?
ethan May 29 @ 2:11pm 
can you help
ethan May 29 @ 2:11pm 
hay i need help it dont say what mod im in
PsychoticPunk  [author] Jan 14 @ 9:57pm 
no problem
DissanNatsun Jan 14 @ 11:50am 
cool ty m8
PsychoticPunk  [author] Jan 14 @ 8:57am 
make sure the w/s sensitivity is pretty low and you're running decently grippy tires and it should be good
PsychoticPunk  [author] Jan 14 @ 8:43am 
no its not
DissanNatsun Jan 14 @ 8:37am 
is having wheel spin normal?
PsychoticPunk  [author] Jan 4 @ 6:37pm 
yea i could work on that at some point
Lightning Jan 4 @ 2:49pm 
hey would it be possible for you to add a output on the micro controller showing what gear its in for dashboards?
PsychoticPunk  [author] Dec 24, 2024 @ 10:40am 
awesome bro, no problem
zzzzzss099 Dec 24, 2024 @ 10:38am 
thanks man works great now
PsychoticPunk  [author] Dec 13, 2024 @ 5:05pm 
disconnect and reconnect all connections including electric while paying close attention to each label and node. Make sure to set shift point parameters sliders for to what works best with your engine and vehicle.

Make sure to connect ignition on signal on the selector control panel for the transmission otherwise the gear indicator and light will not work.

also note that the clutch that comes on the transmission is a 1x1 clutch, not 3x3. It's just edited to be wider for visual effect. If you are using a 3x3 engine it will need an adapter.

Hopefully this helps! Please let me know how it goes.
zzzzzss099 Dec 13, 2024 @ 11:02am 
nice trans but i cant get it to work
PsychoticPunk  [author] Aug 10, 2024 @ 7:09am 
backlight on the panel probably. make sure to connect your ignition key/signal to it
Salizandar Jul 24, 2024 @ 5:34pm 
The gear position on my little control panel seems to not display anything, I wonder what im doing wrong
PsychoticPunk  [author] Jun 26, 2024 @ 4:28pm 
Wanted to, Would have been really satisfying. Not enough room tho. Controller is kinda big.
NTSFMagellan Jun 26, 2024 @ 1:40pm 
Could have put the Transmission controller under the Tranny where the decoration is.
PsychoticPunk  [author] Jun 17, 2024 @ 3:46am 
Thanks brother!
The_Immortalbuilder Jun 9, 2024 @ 9:35pm 
This is one of the best transmissions I have seen! Good work!
PsychoticPunk  [author] May 15, 2024 @ 3:47am 
i will be releasing a T900 daycab with the VT12 at some point. Dont have a ton of time rn cause of work. need to do thumbnails, shoot photos, and color grades, plus a description before i can send it out on the workshop.
the canada dry May 12, 2024 @ 11:56am 
Can you release an example of this transmission in use? I cant get it to work.
PsychoticPunk  [author] May 3, 2024 @ 10:36pm 
Thanks man, glad ppl are liking it.
captainrampage May 3, 2024 @ 9:40pm 
Now this is an awesome idea and execution. Thank you!
mcHAMR May 3, 2024 @ 10:05am 
finally no more spending 2 hours tuning a transmission for my cars
Jeb. May 3, 2024 @ 6:54am 
@PsychoticPunk Gotcha. Funnily enough, I managed to leak some information from one of your other creations to scrap together a hotch-potch gear shifting controller. Thanks I suppose!
PsychoticPunk  [author] May 3, 2024 @ 4:11am 
@Jeb. Not really, unless you create a new controller for it.

@phillydopey daycab t900 with it should be releasing in the next few weeks

@KettleShot are you using a M/S to MPH converter? Speed sensors report MS.
Jeb. May 2, 2024 @ 8:47pm 
Can this be used as a manual transmission?
phillydopey May 2, 2024 @ 7:20pm 
got any models?
KettleShot May 2, 2024 @ 6:40pm 
not reaching correct top speed. max 28 mph
PsychoticPunk  [author] May 2, 2024 @ 4:11pm 
i farded
goose May 2, 2024 @ 3:55pm 
THE FINGO..........
PsychoticPunk  [author] May 2, 2024 @ 3:48pm 
Done 👍 let me know how it works for ya
zeckmon3 May 2, 2024 @ 10:43am 
Slight inconvenience. add a slider that changes the top and low RPS required to change gear. 18 RPS is too high for my truck engine to reach. should be an easy addition
PsychoticPunk  [author] Apr 30, 2024 @ 5:40pm 
no worries brother. I redid the labels in the tcm if you wanna check it out when it updates in your game. if you have any other issues with it hit me up.
NT-242 Apr 30, 2024 @ 5:30pm 
ah ok it was complicated, but i seem to have figured it out, you need to put a 1x1 flywheel then another clutch for that, which is why i thought the panel was broken. Sorry for wasting your time
Space King Apr 30, 2024 @ 5:26pm 
awesome i can now slam this s.o.b it my toter truck
NT-242 Apr 30, 2024 @ 5:17pm 
sorry if its just my stupidity not seeing something
PsychoticPunk  [author] Apr 30, 2024 @ 5:08pm 
hold up ill take a look at and see what I can do
NT-242 Apr 30, 2024 @ 5:06pm 
the transmission panel does not work, even when i put the brake on, and it is also really difficult to figure out where to put the rps in
PsychoticPunk  [author] Apr 30, 2024 @ 4:30am 
@geep bro holded the wrong stick 💀
PsychoticPunk  [author] Apr 30, 2024 @ 3:55am 
Thanks man, hope it serves you well 👍
zeckmon3 Apr 30, 2024 @ 1:10am 
Dang well done. Thanks to this i can finally upgrade from building semi-automatic vehicles to this
GOOP50 Apr 29, 2024 @ 11:44pm 
Now mi ken hold diferent stik than shifdr when i driv 😈😈😈👿👿👿😈😈😈👹👹👺👺👺💀💀💀💀🙈🙈🙈🙈😈😈😈👿👿👿
PsychoticPunk  [author] Apr 29, 2024 @ 5:06pm 
the algorithms smoking that good crack 🤣
noobie Apr 29, 2024 @ 5:05pm 
weird, i've never seen something with 8 subs trending. congrats?