Vermillion... This ship works... needs just a little adjustment. That was a surprise because Your works tend to be well done. This was a small little thingy. If You would "Reforded" The Fukuro I will be very happy.. many people will :-) You are The Man! :-)

This was released when RG was first released so people would have something to use straight off the bat when there weren't any Reforged Ships around.
Now most of the workshop is reforged ships. I would remove it at this point, except that it will probably upset anyone still using it. Even though it is years out of date and probably not compatible with the current version.
Actually, I will hide all of these ships...

Front down boarding ramp is causing the airtightness problem.. It seems that "quick-and-dirty adaption" was just too quick, Sir :-))) It took me some dead plants.. some anger and about 3 min to find it :-P Like ShadowTear wrote. It seems Vermillion is still busy. It's ok :-)

@Schadwe The problem with the ship not being airtight comes from the front boarding ramp. If you replace the sloped block at the end of the ramp with a square that plugs the leak. You should be able to see where the forcefield ends from the top of the ramp with it down.

It took me a little bit of time to find but it's a simple fix.

O2 still does not work. Only the bridge is air tight

I got it fixed (block replacements), then noticed the O2 not working. Spent an hour before coming here (to report it) and I should have right from the start! Thanks me777 (and others)!!

Edit. Ok, something I am doing with regard to what blocks to replace with what. I'll keep trying...(sorry, feel free to delete both comments)

I'm trying to use the replaceblocks command in Reforged Creative 1.2 on this ship (to upgrade the hull to hardened steel) and it REALLY does not like it very much! Block swap shapes all over the place. (example: replaceblocks 1004 403 406) This one is one of my favorites. I know there is more work that will be needed with the weight change, but cant even get past step #1 here. Really weird, and sad at the same time.

@me777 actually I dont think its the new patch at all. The original has the correct block configuration that prevents the air leak. It was changed with this rerelease just not sure why. Might have been an oversight but pretty to easy to fix as you have found. :)

Noticed its not airtight annymore with the new airtight patch.
atfer teaking half the ship apart i found the leak:
it's at the front of the docking ramp.
just replace the half-ramp-block with a full one ant it's fixed.

(also as i had it apart i placed steel blocks between the warpdrive and the right generator, for that the constructors needed to move 1 bolck to the left, the decorative carbon blocks had to go; i'm thinking of adding more steel where the radar and back motion sensor are if i can find a new place for those)

bummer especially now that i spawned the ship i see it needs more generators :) once you turn on the shield it is 100+%

Sadly no. My PC is currently dead and wont be repaired for a week.

ty Vermillion , i love the game but am a terrible builder of ships. Hope you find time to convert some others as well