Iridar and your team, you all rule! Thanks!

@everyone
An update to full version 1.29.0 has been published. Full changelog can be found here:
https://github.com/X2CommunityCore/X2WOTCCommunityHighlander/releases/tag/v1.29.0

Importantly, the following bugfix mods have been integrated into Highlander and you no longer need them:

[WotC] Revival Protocol Fixes
https://steamcommunity.com/sharedfiles/filedetails/?id=1123037187

(WOTC) Revival Protocol Charges Fix
https://steamcommunity.com/sharedfiles/filedetails/?id=1862336674

They DO NOT conflict with Highlander, but there's no reason to use them either. You may still want to use the Charges Fix mod if you want to set non-default amount of bonus Revival Protocol Charges, which is currently 1/1/2.

No worries! I'm sure I'll get this going eventually with the building on my end. You have instructions plenty clear, just I've missed something preparatory or expected. Between that and r/xcom2mods' wiki entries I should be good.

Sorry, you'll have to wait until the full 1.29 release.

I hate asking anything of Iridar, as I know he's a busy one, but I'm dumb. Is there any chance you could push an update? I've tried to build the mod and have been hitting a wall. The target sort caching is something I desperately wish to utilize.

Thanks. Manually installing the highlander worked. Still very strange, because it was on steam mod folder.

See the two troubleshooting links in the description above.

@Dragon32 i have the same problem of @Alakhai, but my game doesnt launch (im getting error detected attempting load of package xcomwotccomunity highlander)

It seems the patch notes for the latest update are once again incorrect, fewer changes have actually made it into it. Apologies for the confusion, it seems the way I roll out partial releases needs some refinement.
Mentioned features will make it into the Highlander eventually.

@Alakhai
AML reports as Dependencies what mod authors have put on their mod's Workshop page. Shouldn't be an issue.

Hi, is it ok, that after swaping to LWOC [experimental] and this version of Highlander two other basic mods fo LWOC - Accurate Situation Report and Community Promotion Screen are missing dependencies, witch is previous version of highlander (1.28) ?

I didn't have any problems, I just wanted to say you guys are a great group of people and I see highlander is still updating today. While firaxis is only fool players by Chimera instead of xcom3, there are some people who are fighting for a better xcom. thank you.

Astounding work, as always! Going by the Github, it looks like that DLC Hook Manager should improve things drastically for people with enormous modlists.

@everyone
Published an update. Two important changes are:

Bugfix: Tentative fix for the crash that sometimes occurred while firing weapons or using grapple. May fix Templar Channel crash as well.

Performance: added DLC Hook Manager to call DLC methods only from DLC Infos that actually implement them. This should make frametime spikes less pronounced.

These features are very experimental, please keep an eye out for anything weird.

Great, thanks!! I'd think this should get great fanfare, as in my opinion this CTD issue is extremely invasive and far too frequent, given the right conditions - a templar with channel and lots of grappling and/or special ammo usage, which should be quite common. Therefore, a fix for this issue is super exciting to me. :)

This month.

@Iridar Thanks! I'll see if I have success with the older version. Since us outsiders have zero knowledge on what a realistic ETA is on such a release, could you please give me your best guess? Are we looking at a month or two, or six months, or a year? Thanks again.

@RolandJ
Fix will be added when it's ready.

It seems all of these issues are caused by the fix to the memory leak associated with firing projectiles that was added in 1.22, so until the fix for the crashes is published, if you don't have any mods that require a version newer than that, you can roll back to 1.21, previous releases are available here: https://github.com/X2CommunityCore/X2WOTCCommunityHighlander/releases

@Iridar When will the fix for the Templar's Channel ability make it into this version of the mod? The one that fixes the crashes related to grappling, whiplash, and using special ammo that are caused by a previous update to the highlander?

Just want to thank you Iridar, not only for this mod but several other mods that are a mainstay in my load order. Thank you for taking the time to keep these updated and improving them over the years when you don't have to. Whether your playing the game or not, that says a lot.

@Iridar got it. thanks!

You can set the "ignore" checkbox on individual dependencies.

Hi! I switched to beta 1.29.0 based on Iridar's comments on several fixing mods, that new Highlander fixes those issues. All good except that in AML mods that depend on Highlander 1.28.1 are red like they're missing dependencies. Is there any way to solve this or should I just ignore it? Thanks!

Update to v1.29.0 has been published.

For this version we're going to try something different. Rather than publishing one big update all at once, we're going to gradually add new features without changing the version number.

Right now there are only a couple of small changes. You can view them and future changes here:

https://github.com/X2CommunityCore/X2WOTCCommunityHighlander/pulls?q=is%3Apr+milestone%3A1.29.0+is%3Aclosed

When the time comes, a full properly formatted changelog will be made available.

I just experienced the issue with the freeze/infinit load on launch problem and copying the Highlander's CookedPCConsole folder into %USERPROFILE%\Documents\My Games\XCOM2 War of the Chosen\XComGame did indeed fix the issue. Thank you for the heads up, Dada and Iridar.

Alright thank you :)

Copying files manually, as you have already done.

Figured I'd ask, is there anything we can do on our end to fix this?

Thank you for the quick answer

This happens for some people for reasons unknown. It has to do with how the game loads script packages, not with the highlander itself, which works normally for vast majority of users.

Hey, haven't seen it mentionned anywhere so I figured I'd report it here, currently both the stable and beta versions cause a freeze/infinit load on launch. What seems to happen is the script is looking for the cooked folder in the mydocuments path instead of the mod's. I tested it on 3 fresh installs, with only the Highlander mod, etc

Copying the Highlander's CookedPCConsole folder into %USERPROFILE%\Documents\My Games\XCOM2 War of the Chosen\XComGame lets the game load "normally"

@MrCloista
I honestly don't remember. Currently no plans for that, but it's not out of the question either.

@Iridar what is the visualisation issue for Incinerators with Spark Arsenal? And is there any plans to integrate the fix either into spark arsenal itself or into the highlander?

@munn0726
There's no harm in still using Weapon Fixes alongside BETA Highlander if you still need Weapon Fixes for something. In case of SPARK Arsenal, Weapon Fixes is required to fix visualization for Incinerators, so you should keep it.

@Iridar

Thank you. If I unsubscribe from weapons fixes, will your Spark Arsenal 3.2 still work? I just saw a big warning, lol. Thanks again!

Unfortunately there's no centralized resource for that.

Random question. I was unable to find anything specific( maybe a failure on my part), but is there a resource where I can find the mods I no longer need if I am using the Highlander/beta?

@Unkown Rose
There are no fixes in this update that will help you resolve that issue.

hope so as i can not use the akimbo for some reason

@everyone
Update to v1.28.0 was published. This release brings mostly bugfixes, particularly, it integrates many bugfixes from the MrNice's Weapon Fixes mod.

@everyone
Update to 1.27.1 was published. This release is nearly identical to 1.27.0, we've just reverted one of the smaller bugfixes, as that caused another bug.

@Yooppi
It does not change the parameters themselves, but it does fix the underlying code so that REACTION_DASHING_FINALMOD actually gets used.

Does Community Highlander changes this parameters? (REACTION_FINALMOD=0.7f
REACTION_DASHING_FINALMOD=0.6f)

just finished the campaign in about 80 missions with 100 mods on 1.27 beta, no major issues

im trying to get the mods to work but keep crashing when i try to play a misssion

Like @Etienne, bDontUnequipWhenWounded=true doesn't work for me.

Confirming that the logging messages no longer appear. Thank you, Iridar!

@Andrei Cineva
Thanks for letting me know!

False alarm. It seems to be a bug with a recent Yellow Alert 2.0 update.
Sorry about that!

OK, thanks. Will keep you posted on what happens with the Stable version, when I get into another similar situation.