Hallo..
Kann mir wer Helfen, und sagen ob Wir meine Strecken, (Köln-Koblenz), und (S-Bahn Köln mit Flughafen Köln/Bonn) irgend wie verbinden können?
Danke im Voraus

The combined route appears as a scenario in standard, but the combined route does not show in quick drive, which is a drag, but the scenario provided works and i very nice/.

Same as Anto98 says i dont own Albula line then go to store to purchase and it says i own it already. Not Working.

Here is a list of workshop scenarios for the route.

Bom dia, isso seria uma extensão da rota?

plus, when i want to play it in quickdrive i have no textures, is this normal ?

hello, i don't know why but the game tells me that I don't have the albula line, is there a solution ?

Hey quick question can u do the same with Kufstein to Innsbruck connected to bludenz over ST. Anton am Arlberg can you do that ? that would be so awsome thx anyways !

The included scenario doesn't work. The oncoming train at Ospizio Bernina derails.

Same here. TimedCheckForInstall: Has no Uninstalled SyncedItems
And I bought the Bernina Pass specifically for this.

Same here!

Apparently, this addon didn't work anymore with TS 2020. When suscribed, I have a download and then, if I go to "Drive>Wrokshop" I can see a line named "Albula line and Bernina pass". Now, if I select this line, I have the following error:

TimedCheckForInstall: Has no Uninstalled SyncedItems

And the game is blocked by this external window.

Now, if I avoid to select this line, I can't see any differences into the game. No new scenario, nothing.

The best would be another RhB route, from Chur to Reichenau-Tammins. This would make it possible to run the full Bernina Express fro, Chur to Tirano, as well as the full RhB section of the Glacier Express from Disentis to Chur and/or St Moritz. Crossing fingers, it's only 30 km, perhaps one day...

Hi. Is this route going to be merged with Poschiavo-Tirano line? I'm sure, that it would be really nice to have a posibility to drive all this way in one scenario)

Merci beaucoup.

De oplossing gevonden voor de samenvoeging van de Albula lijn en Bernina Pass. Je moet in Steam Train Simulator de Workshop kiezen en daarna de Albula Lijn en Bernina Pass. Dan onder TAB-blad Beschrijving op Abonneren drukken (deze stap is het belangrijkste) dan wordt de samenvoeging na de volgende opstart van Train Simulator verzorgd en krijg je een grote lijn met de naam "Albula Lijn en Bernina Pass" te zien via Drive enz.

Conform Steam both DLC's are installed and still the Workshop ask to buy Albula Line Add-on that I bought already 2 times. What can I do to merge these 2 routes?

To day I bought the Albula Add-on again and still the Workshop tells I have to buy this! Please help me!

Hi hgvaasen, I'm very sorry I missed your messages here. I never received an email from you otherwise I would have responded to your enquiry. I have seen some players experience this issue before, and to be honest, I have no idea what is causing Steam to to this. Most customers seem to get this merged Workshop route installed without any issues so why a few have problems is a mystery!

Why does Steam, Dovetail or Thompson give no answer on the merge problem. Both line available but the workshop still say buy the other line!!!

I have bought both lines Albula and Bernina Pass but can not merge both lines in the Workshop! What goes wrong?

I send an email to Thompson and to Steam but both don't answer to solve the merge (combine both lines)!!!

I've got similar problem to @gtrv78. I own both add-ons too but TS2019 still saying "buy Albula Line Add-On". Any solutions?

I own both lines and subscribed the mod but it keeps saying I need Albula Line... I repeat: I own both lines... How could I "prove" to this mod I have both lines????? Thank you.

Who can help me to merge the two lines. What is the right procedure?

As the two parts of this route have different electrification systems does that mean the only train that can traverse the whole thing is the allegra? I cant find any mention of any of the other rhb rolling stock being dual voltage.

Do you guys at Thomson Interactive have any presence on social media? Can't seem to find anything that isn't your webpage. I hope you keep expanding the virtual RhB network, it's very unique among other TS routes.

Perhaps I'm too silly: How can I play on the merged routes? Don't know how to download them.

I have all the add-ons, I can't download it! Why?

I'm excited to hear from Thomson, I hope it's a Swiss Route.

Greetings from Germany!

I really hope we could have some more mergers - like maybe Chur to Thusis. Also Poschiavo to Tirano would be appreciated :)

We have lots of exciting plans and should have some news about forthcoming products to announce soon

Any thoughts of producing routes and stock for the BLS, BOB & WAB routes in the Bernese Oberland.?

I've made a scenario for this merged route. Give it a try. 2h45m of driving: https://steamcommunity.com/sharedfiles/filedetails/?id=1637714819

On that note, will there be a route extension for the Bernina to Tirano?
As that is another spectacular bit of the Berninabahn especially as it contains the famous viaduct at Brusio, the signature building of the Berninbahn.

Un bon scénario. Il s'agit ici de simuler le BEX de Chur à Tirano... oups ! à Poschiavo en attendant la dernière partie de la ligne ;-) En hiver on part de Tiefencastel, le BEX ne s'arrêtant nulle part avant. Attention dans ce sens les pantographes "Bernina" sont levés, il faut donc les baisser et monter le pantographe "Albula". Comme dans la réalité, il faut changer de pantographes à Pontresina où, en venant de Samedan, vous vous arrêtez sur une voie mixte qui permet ce changement de courant. En hiver, les arrêts du BEX partant à 9h18 de Chur sont : Tiefencastel, Filisur et Bergün (uniquement pour des passagers montant dans le train), Pontresina, Alp Grüm et Poschiavo. Alors les demandes d'arrêt dans le train ou en gare ne sont pas valides.

j'ai les 2 dlc ça me dit de l'acheter???

Cool

Was auch eine schöne Strecke wäre, ist von Tirano nach Davos oder umgekehrt.

i have the 2 dlc but i can't drive because he don^t find the albula dlc

Hi snoopy1, we are trying to cover as much of the RhB network as time allows while keeping our quality and runtime performance high. Thank you for your suggestion about the route to Disentis, we'll keep this idea in mind for the future (as with all the other suggestions that we have received). Thanks again for your input.

Hi cimolai, the process of connecting commercially published routes together is complex and has a few limitations. One of these limitations is that this new Workshop route needs to use the location markers from either Albula Line OR Bernina Pass – when we did the work the markers from Bernina Pass were selected for technical reasons.

This does not stop the creation of scenarios from locations on the Albula Line but it does require some extra work when you create them. Choose Bever as the starting location then drag the scenario icon to where you want the scenario to start is one option. Alternatively you can leave the scenario icon at Bever and fly your camera to Thusis and place your train there. If you then choose the scenario option for “Force Cab Camera” then when you run the scenario you will start in the train cabin at Thusis.

Hi Thomson Interactive Ltd, can you explain the procedure to create a scenario that can be driven in standard mode from thusis to Poschiavo ??, if possible, of course.

tres bien, excellent

Thanks to everyone who replied, I found it OK under the quick drive tab. Will now drive from Thusis to Poschiavo, hope there will be some scenarios soon as you don't have to make station stops. The Poschiavo Express ! Cheers

I too had to search bit. As there are no scenarios for the combined route, the route only appears under quickdrive

For the people reporting that the drive button is grayed out, try ignoring it and go to quickdrive. It was there all of the sudden for me. (So, go to workshop, and if it's grayed out go back to quick drive and you might find it there)

daveking8. It is no longer possible to access workshop items using the drive key in the workshop, it is always 'greyed out'. In this case, I understand there are no scenarios per se, but if you go to quick drive, the route should be there. Hope this helps.

Hi daveking8, have you followed the process as described in my post to foundescamions below? Other than that I don't know what to suggest. I'm sorry you're having problems, it must be very frustrating. This is the first time we have used Steam Workshop to distribute bonus content so our own knowledge of potential issues is limited.

Have just purchased the brilliant Bernina route. Have downloaded the the link to join it to my Albula line, followed the instructions but the 'Drive' button is greyed out ..... help !