Subscribe to download
Fablok 6D PKP Cargo SM42 Series Diesel Locomotive

Full description here: https://steamcommunity.com/sharedfiles/filedetails/?id=3051566828
-----------------------------------------------------------------------------------
Manual:

Step 1. Before start
- In the cabin, open Low Voltage cabinet, and turn On “Main Battery” and “Traction Motors Powerage”. You should hear an Alarm Buzzer, delete it with “CA/SHP”.

Step 2. Start
- Pulse "Oil Pump" switch.
- Pulse "Fuel Pump" switch.
- Turn On "Water Heater" switch.
- Wait until Oil Pressure gauge shows around 14, and water temperature is well above 30, then for a few second press "START" button.
- Few seconds after start, generator should engage itself, and the compressor should pump the air up to around 0.5.

Step 3. After start – prepare for route
- In order to gain "drive" ability, "Set Braking Force" should be at "-1" or "0". Main Conduit should fill automatically.
- Perform brake check procedure. Set braking force at values from "1" to "5", wait untill pressure in conduit drops and in cyllinder rises, then set braking force to "0", conduit should start filling in. You can speed up the process by pressing "Cylinger Pressure Release" button. Braking position "6" triggers emergency brake. To release pressure after emergency braking, set braking force at "-1" to perform impact filling of the conduit.
- (Optional) Choose D or R for forward drive or reverse drive (default D)
- (Optional) Turn on lights
- (Optional) Turn on radiotelephone and set channel, be sure to check radiotelephone 1-0-1!

Step 4. Driving.
- In order to drive, if on position 0 press "Position Up" once to go to position 1, or if on positions from 2 to 11, also move Drive adjuster wheel to position 1. Wait around 1-2 seconds until main circuit is closed. It is indicated by rise of amperage on "Traction Motors Amperage" gauges, and of course you'll notice because you'll start moving. Then player can add positions normally.
- Because of introduction of "Pressure Cut Off System" valve, and the "Linear Contactors Cut Out" everytime locomotive brakes are activated, by player or CA/SHP/Radiostop, or the Drive Adjuster Wheel is set back to 0, "drive" is gone, untill the Drive Adjuster Wheel is turned to position 1 for around 1-2 seconds, so the circuit can close.
-----------------------------------------------------------------------------------
Features:
- Polish Safety System CA/SHP (a.k.a. Dead-Man Switch)
- Polish Radiotelephone Safety and Communication Device
- Realistic drive and control system
-----------------------------------------------------------------------------------
Radiotelephone "1-0-1"
- Turn On with flipswitch
- Select Channel using arrow buttons
- If there is emergency press "!RADIOSTOP!", stops your train and others
within proximity of 1000m on the same chanel
- To regain control and reset the alarm push "Reset" until alarm stops (about 10s)

WARNING! Resetting radiostop is individual for each unit with it equipped. Works only with units equipped with Radiotelephone.
-----------------------------------------------------------------------------------
Changelog :
V1.0.0. Workshop Upload
-----------------------------------------------------------------------------------
Warnings/Known Bugs:
Use with infinite electric turned off!
-----------------------------------------------------------------------------------
Things I borrowed:
- Infinite Generator:
https://steamcommunity.com/sharedfiles/filedetails/?id=2565101850&searchtext=infinite+generator

Do not reupload including unmodified/modified or repainted versions, even with credit of any form. You are permitted to use certain parts or/and controllers included in this creation, as long as the rightfull author is credited. Failing to do so, revokes your right to use them.