Page du magasin
Space Engineers
Tous Discussions Captures d'écran Créations de fans Diffusions Vidéos Workshop Actualités Guides Évaluations

Space Engineers

Page du magasin
Space Engineers >  Workshop > Workshop de RoboPenguin
28 évaluations
(Star Citizen) Drake Vulture Mini - Survival
Description Discussions0 Commentaires10 Notes de changement
   
Récompenser
Ajouter aux favoris
Favoris
Retirer des favoris
Type: Blueprint
Mots-clés : ship, small_grid, safe
Taille du fichier
Publié le
Mis à jour le
1.839 MB
10 déc. 2023 à 20h03
16 déc. 2023 à 11h11
5 notes de changement ( voir )
DLC nécessaires
Cet objet nécessite les DLC suivants
Space Engineers - Decorative Pack
Space Engineers - Wasteland
Space Engineers - Heavy Industry
Space Engineers - Warfare 2
Space Engineers - Automatons
Créé par
RoboPenguin
En ligne
Voir les 50 collections créées par RoboPenguin et d'autres personnes (certaines peuvent être cachées)
1,799 Visites uniques
567 Abonné(e)s
42 Favoris actuels
Vous devez posséder le ou les DLC requis pour télécharger cet article.

S'abonner pour télécharger
(Star Citizen) Drake Vulture Mini - Survival

Dans 1 collection faite par RoboPenguin
Star Citizen Inspired Builds
70 objets
Description
A small grid utility ship with changeable grinding, drilling, or welding hard-points.

Survival ready / No mods / Scripts / DLC / Easy-weld subgrids (2 block engine)

Description

This ship is inspired by the Star Citizen ship "Drake Vulture" which is a salvaging ship. This version has been compacted to be a practical small grid for use in survival. Everything is fully conveyor connected for everything, just make sure that if you're re-placing the drills that the small conveyor port faces up to the small curved conveyor tube.

It has VTOL thrusters to carry large weights around or give extra speed in a straight line. The ship can be used for mining, salvaging, or welding simply by swapping the two tool mounts at the front (grind down drills, then place welders or grinders). It comes with 2 gatling guns just in case you run into a drone or a lone turret. The ship also comes equipped with a survival kit and large hydrogen tank - making it ideal for a first trip to space vessel.

Specs

PCU: 4,659
Blocks: 771
Length: 14m (just over 5 large blocks)
Width: 8m (a little under 3 large blocks)
Height: 8m (a little under 3 large blocks)

Note: Can -barely- fit through a double gate horizontally.

Weight: 64.16t (empty) - 150t (full)
Flyable planets: All vanilla fully loaded (May require VTOL for Pertam)

3x Batteries
1x Small Backup Reactor (access at rear door)
1x Large Hydrogen Tank
1x Hydrogen Engine
1x O2 Generator
1x Large Cargo Container
2x Medium Cargo Container
2x Small Cargo Containers
1x Survival Kit
1x Ore Detector

Scripts

Subgrid Thruster Manger by Whiplash141

Note

To build the VTOL thrusters in survival all you need to do is place a curved conveyor tube and a large hydrogen thruster pointing towards the rear of the ship on each rotor. The script will handle the thrusters once you weld them up.

Special Thanks

Thank you to Cloud Imperium Games for designing this awesome ship.

Thank you to Whiplash141 for your amazing scripts.

Thank you to AssHunter for the skybox used in screenshots

Disclaimer

I am a community member of Star Citizen. I do not own Star Citizen or Roberts Space Industries trademarks. All rights belong to Cloud Imperium Games. This is a for-fun project only.

Challenge :)

Can you identify my next work in progress Star Citizen ship in the screenshots??
10 commentaires
< >
NuTTi 2 janv. 2024 à 7h01 
omg its so cute
RoboPenguin  [créateur] 16 déc. 2023 à 11h14 
Bwell thanks, and no not exclusively. It can do grinding and welding too. It just happens to come with drills equipped by default because that is what I use the most on small ships.
Decaos 16 déc. 2023 à 10h28 
That Vulture is a mining ship? 🤣🤣🤣
But good work :selike:
BIV 11 déc. 2023 à 7h26 
Great, I'm glad there is no conflict here. I should have realised that by the reference to Star Citizen , I need sleep I think.
Well all is good so enjoy your day/night and thanks again for your upload.
Cheers mate.
RoboPenguin  [créateur] 11 déc. 2023 à 7h22 
The Vulture is not my design, this ship is based on a ship from the game Star Citizen. This is just my take on it - and I've improved the design for use in survival. There are several other Vulture ships on the workshop.
BIV 11 déc. 2023 à 7h05 
Thanks for that too.
I don't want to cause problems for any one but I just found a ship that looks very much like yours.
Are you associated with MrHunterPOLSKA and his ship the [ASC] G-2903 Vulture ?
I hope it's all cool but in case there is anything dodgey about it I thought you should know.
RoboPenguin  [créateur] 11 déc. 2023 à 6h57 
No problem, the only subgrids are the two engines at the rear, but those are super simple to place (its literally just a conveyor and a thruster)
BIV 11 déc. 2023 à 6h54 
Thanks for explaining that, I was expecting the usual conflict with the printer to build one but this makes it easier. Thanks again. :steamthumbsup:
RoboPenguin  [créateur] 11 déc. 2023 à 6h51 
BIV, thanks for the feedback! The front tools are not even technically sub-grids, you just have to grind down whatever tool you have there and replace it with another. This is to keep the blueprint simple for welding in survival.
BIV 11 déc. 2023 à 6h18 
This is a great looking build and from the looks and description would be very useful. The easy way of changing out the the front sub-grids is great and makes it very appealing for use in a survival game. Thanks for posting it on the workshop and sharing your idea and your effort. Cheers.