Subscribe to download
HMLS Goliath MK1

I've been watching Frantic's Landship build, and had a few ideas of my own. So here I present, the HMLS (Her Majesty's Land Ship) Goliath! Built over the course of about 12 hours.

Features a primary armament of two Artillery cannons mounted in the turret, with a semi-automatic loading system. There are also two secondary turrets on the aft deck, each with a single heavy autocannon. Inside the hull lies an armory, medbay, engine compartment, and sleeping quarters for the crew.

STARTUP SEQUENCE

1. Enter the engine bay. On the front bulkhead, there are controls for each of the two engines. (Credit for those goes to Jack Grimm from the workshop.)

2. Toggle the starter for both engines.

3. Set both throttles to full.

4. set both clutches to 0.30 (Seems best set. If it has trouble getting up hills, turn the clutches up, but this will drastically reduce overall speed)

5. move to the drivers compartment at the front, and disable the parking brake on the lower left side.

Forward and reverse are automatic and set to W/S, as well as turning set to A/D. (Not too good at creating complex drivetrains yet.)

To load the main guns, sit in the seat in the aft of the turret, and press the red button. This will trigger both the gun breaches as well as the feeder mechanisms.

THE GUNS MUST BE IN A NEUTRAL POSITION TO LOAD.

Wait about 10-15 seconds, then hit the toggle button again, and the breaches will close, and you are ready to fire with Space. The turret controls are as basic as the driving controls (both the main turret and the secondary turrets.) Side-to-side is controlled with A/D and the guns elevation with W/S. The guns automatically return to the neutral position when not under control of W/S, but the turret does not.