Subscribe to download
3x3 Modular 5 cylinder Supercharged Engine Cooling Demo Platform

A Modular engine Cooling Demo on a 3x3 supercharged 5 cylinder engine

Turn the key, wait for the engine to start
advance the Primary clutch that is set to 0 (not the clutch set to 0.73)
then advance the main throttle.

If the engine rps starts to vibrate back the main clutch off and re apply it
sometimes the AFR gets thrown off past 40,000 Liters per hour

The meter in the top left is the Liters per hour used.

The engine is temperature stable up to about 33,000 Liters per hour

If you run the engine at full throttle it will heat throttle at 114, then you can dial the throttle back until the temperature is stable. It will not explode.

The engine is cooled with 36 3x3 Electric radiators on independent cooling loops using a cooling manifold 1 pipe and a small impeller each.

The impellers are driven off the cooling clutch at 0.34 to reduce engine power drain, but the engine can power them at full power (there is no cooling improvement).