Subscribe to download
Modular Segment for Articulated Busses

Description and Usage
This is a segment designed to be used with articulated busses, it can pretty much just be copy and pasted into another bus to extend it, no extra work necessary. It could in theory rotate about 30 degrees, (and it is capable of doing it if you hook it up to a testing rig) but because of the way most people will install it on their busses it will probably only turn about 5-10 degrees max. (Because nothing is forcing it to stretch/extend). But this would also be able to be used for connections to rotating walkways etc. If one side was kept stationary, and in that case would turn further. The segment is not wide enough to accommodate seating, it's simply a 5-7 block wide walkway between the two halves of a bus. This is because I had to accomadate all of the parts that connect it together. It should be noted that it contains 5 separate parts, including the front and end connector pieces. One last thing, the whole thing is sealed (not waterproof) but in the sense there aren’t any holes between the different components that could cause you to see through, making it a much more sleek and refined design, rather than having cracks and holes you can see through.

Fair use
You can use this for any personal Project however I would like you to inform me if you are going to use it on a reupload. Thank you.

Note: If you are using this on a 3 axle articulated bus, you may need to adjust the suspension stiffness for the two axles closest to the accordian piece to balance it out, if you adjust the stiffness lower, the corresponding side will push slightly further down. This is a very important thing to take into consideration to balance out the rear portion of the bus.

Note: If you would like more turning capacity, you can connect two of them in the middle and double the length, this will improve the turning capacity. You can pretty much link as many as you want together and then will just be able to handle sharper turns. After further testing, I highly recommend doing this if you are using this for busses.