Instal Steam
login
|
bahasa
简体中文 (Tionghoa Sederhana)
繁體中文 (Tionghoa Tradisional)
日本語 (Bahasa Jepang)
한국어 (Bahasa Korea)
ไทย (Bahasa Thai)
Български (Bahasa Bulgaria)
Čeština (Bahasa Ceko)
Dansk (Bahasa Denmark)
Deutsch (Bahasa Jerman)
English (Bahasa Inggris)
Español - España (Bahasa Spanyol - Spanyol)
Español - Latinoamérica (Bahasa Spanyol - Amerika Latin)
Ελληνικά (Bahasa Yunani)
Français (Bahasa Prancis)
Italiano (Bahasa Italia)
Magyar (Bahasa Hungaria)
Nederlands (Bahasa Belanda)
Norsk (Bahasa Norwegia)
Polski (Bahasa Polandia)
Português (Portugis - Portugal)
Português-Brasil (Bahasa Portugis-Brasil)
Română (Bahasa Rumania)
Русский (Bahasa Rusia)
Suomi (Bahasa Finlandia)
Svenska (Bahasa Swedia)
Türkçe (Bahasa Turki)
Tiếng Việt (Bahasa Vietnam)
Українська (Bahasa Ukraina)
Laporkan kesalahan penerjemahan
Warm it up on a heating pad, take it off the pad, put it on a flat surface, flatten it out and cover it with a small towel, and stack some hefty flat books on it. Let it sit there for an hour or so and you're done.
My mousepads get mangled all the time after sitting scrunched-up in my laptop bag. You could use a clothing iron with a towel between it and the pad to help warm it up, but I don't trust you... So, use a heating pad and just lay it on top of the mousepad to warm it up, instead. :)
But Mork's method works great as well.
Fixing a mouse pad is hard, but can be done with using a cloth over the top then iron on medium to low heat. Stack books or something flat and heavy on top afterwards, leaving it for a few hours while it cools back down. It's normally due to the heat and sweat from your palm which causes a mouse pad edge to raise, so you are attempting to reverse that process. Recreating a perfectly flat surface however sometimes doesn't work.
I use my keyboard tray with out a mouse pad the only thing that happens is the teflon feet wear the finish off the keyboard tray. Mouse pads add way to much friction to the mouse.
I think using a cloth as a cover for it would be a wise idea like the others have suggested.
If it is one of those long ones, then place it and put your stuff on it. It will flatten as it is being used.
I have a Teflon-Coated mousepad that says differently.
They're flexible (The aluminum/steel ones are not, of course.) and much like any mouse-pad, except they're very slick. :) One durability issue is that they can get dented if enough force is applied, like something sharp and heavy laying on them.
Another issue is that some very high resolution mice could have tracking issues. It depends on the sensor and the pad's design, though.
Why use a mouse pad at all?