Can't make the air boat jump, any advice?

[FAHNENJOKER]

Hi. I seem to be unable to make the jump with the air boat in Chapter 3 over that ramp where you have to put the four blue barrels underneath it in the water to raise it up. I tried several times but the air boat always seems to buck upwards and slow down in the last moment on the ramp and then crash into the conrete wall instead of landing on top of it. I put all barrels under the ramp, it cannot be raised highter. I'm not aware of any boost or nitro for the air boat, or is there such a thing? Any got any advice?

[John Helldiver]

Hey, the airboat doesn't have a boost or nitro like the jeep does. Do you have a video of what it looks like when you hit the ramp at full speed and don't make the jump? The jump should look something like this. - https://youtu.be/pv6J4ojQRMA?feature=shared&t=243

[John Helldiver]

Looks like it might not have embedded the time correctly, skip to 4:00 of that video.

[FAHNENJOKER]

Originally posted by VΛLKYRIΞ:

Hey, the airboat doesn't have a boost or nitro like the jeep does. Do you have a video of what it looks like when you hit the ramp at full speed and don't make the jump? The jump should look something like this. - https://youtu.be/pv6J4ojQRMA?feature=shared&t=243

I made a recording of how it looks for me: https://gifyu.com/image/SZAFc

[FAHNENJOKER]

So what am I supposed to do now? Just stay stuck there forever and stop playing? No one else got that problem? No one got any advice?

[CABAListic]

Have you tried restarting the chapter? Start a new game on Water Hazard and see if the issue persists. Also, if you have any modifications installed, either from the workshop or manually, please remove them all and try with a vanilla game setup.

[FAHNENJOKER]

Originally posted by CABAListic:

Have you tried restarting the chapter? Start a new game on Water Hazard and see if the issue persists. Also, if you have any modifications installed, either from the workshop or manually, please remove them all and try with a vanilla game setup.

That fixed it, thank you! The good old "try turning off and on again" trick ;)