Clear Corvega Assembly Plant bug [HELP]

[germ4Nn]

I have the mission of clearing that place from the minutement, I've been there multiple times and killed their boss already, but not it is necessary to do it during a quest.

The problem started when they gave me the quest, it wasn't showing in the map. I googled the location and found it. After going in and clearing all the raiders, it didn't end.

As far as I can tell by my experience, every time it gives you a quest to "clear" a place full of hostiles, you only need to kill the dude marked in the quest.
Now, since no dude was marked for the quest, it wasn't posible to find in the map.


Is there a way to at least spawn the boss (I don't mind cheating as long as I can finish the quest).

[Cor.]

You have to clear the place, not just kill the boss.

[Dirtybird_ inc]

the main guy to kill is on the top floor depending on where you enter the building don't remember his name also when you go back outside you'll find a bobble head at the top of one of those towers .

[The Inept European]

Originally posted by Cor.:

You have to clear the place, not just kill the boss.

Not true, for this one you only have to kill the boss.

However as OP has no quest marker at all that's likely the problem.

[The Inept European]

The boss in this mission is the only one with a name.

Some missions you have to kill only the boss, some you have to kill multiple designated targets with quest markers over their heads, some missions you have to kill everything. It depends. This one is a boss kill mission.

I have many times just done the one guy, quest complete.

[The Inept European]

My brain failed me but the wiki says his name is Jared.

[The Inept European]

So OP you have multiple issues.

One is that you already killed the boss before you got the quest. I'll be honest I don't know what happens in that situation.

Second is you are not getting a quest marker, either on the location or on the target.

One guess is that this quest which is usually at Corvega has been moved somewhere else because Jared is already dead. The game does do that.

When you go to Data - Quests and select this mission and press Show On Map, does it by any chance jump to a different location, not Corvega?

Also - did you go to the affected settlement first (usually Ten Pines Bluff but not always). You don't get the quest marker on the target location until you go talk to those people first.

[Bored Peon]

Not going to show a location because there is no mob to locate.

The problem is you recently cleared it and the game did not repopulate for the quest. It is a VERY common issue with radiant quests.

Have to console it or wait for a respawn.

That is okay though found out if you go grab Oberland and Ten Pines before First Step the idiot sends you to County Crossing.

[germ4Nn]

Originally posted by Bored Peon:

Not going to show a location because there is no mob to locate.

The problem is you recently cleared it and the game did not repopulate for the quest. It is a VERY common issue with radiant quests.

Have to console it or wait for a respawn.

That is okay though found out if you go grab Oberland and Ten Pines before First Step the idiot sends you to County Crossing.

Hi, I cleared it when I started the game, I was level 10. Now I'm level 70, it's been a while.

I tried spawning Jared with a console command (player.placeatme 000D3C53). It spawned Jared, I killed him but it didn't update the quest.

Also, I've got the quest after talking with the settlers needing help.

And no, it doesn't show me the place in the map. It only shows me my current location.

[germ4Nn]

Originally posted by The Inept European:

My brain failed me but the wiki says his name is Jared.

Thanks, tried spawning him but it didn't work.

[Cor.]

Originally posted by germ4Nn:

Originally posted by Bored Peon:

Not going to show a location because there is no mob to locate.

The problem is you recently cleared it and the game did not repopulate for the quest. It is a VERY common issue with radiant quests.

Have to console it or wait for a respawn.

That is okay though found out if you go grab Oberland and Ten Pines before First Step the idiot sends you to County Crossing.

Hi, I cleared it when I started the game, I was level 10. Now I'm level 70, it's been a while.

I tried spawning Jared with a console command (player.placeatme 000D3C53). It spawned Jared, I killed him but it didn't update the quest.

Also, I've got the quest after talking with the settlers needing help.

And no, it doesn't show me the place in the map. It only shows me my current location.

That fits.

Ive wiped out locations, but dont get the "cleared" tag on it.

I was thinking I had to get the "quest" before hand.

[Bored Peon]

Originally posted by germ4Nn:

I tried spawning Jared with a console command (player.placeatme 000D3C53). It spawned Jared, I killed him but it didn't update the quest.

That would not work because once Jared is dead a new NPC replaces him. You needed to kill the new NPC that replaces him.

Originally posted by Cor.:

I was thinking I had to get the "quest" before hand.

It is a radiant quest, you can be sent back to a location multiple times. They have a good chance to bug out if they have been recently cleared.

Also keep in mind every time you enter a cell you reset the respawn timer. So you would want to wait extra for a respawn or save scum back to before entering and waiting longer.

The quickest and easiest way would be to finish the quest with the console, since it is only a radiant.

[Necron Monolith ₿]

https://youtu.be/nAKOveWEJ9U

[NecroMaster]

I believe you are confusing the quests “the first step” for the quest “clear corvega assembly”.

The first step sends you to tenpines bluff first and then tenpines bluff sends you to kill Jared who lives inside corvega.

However you got the quest clear corvega from settlers which enlists you to kill all the raiders inside the plant.

[dolmore]

Named NPCs don't respawn. For a radiant quest like this you just get a boss raider in the same location. Make sure you have the mission selected in your quest menu. Otherwise you won't get the quest marker and it might not show the mission as complete. If you kill Jared before getting the first mission to clear the place then you'll have a dialogue option when you speak with the settler saying that you've already done it.

[Zotliatlicor]

Jared is only there the first time you are sent to clear Corvega, and you may also kill him before you get the quest to do so from Settlers the first time. If Jared is already dead, the Settlers at Tenpines update that and send you to another location for their (given by Preston) Join Minutemen.

Jarerd's story and terminals in Corvega are linked to Mama Murphy and the Minutemens flight from Quincy to Sanctuary.

The First Step quest can send you to a lot of different locations, all over the map, depending on when you decide to do it and how far you have progressed in your game.

When you (if you) get the Corvega Loacation a second time, there will be no Jared Boss, but there still should be a 'boss' at the end that triggers the quest complete flag, AND the location should NOT be cleared in advance.

I got this problem in the Back Street Location east of Hangmans Alley once, i had cleared it, and then some Radiant sent me there before the location was respawned and it was empty.

Advice is to avoid it for a long time, i play on Survival and thus the regrowth of Cleared locations take a lot much longer. Eventually it will regrow and be 'uncleared' again. I actually did all of Far Harbour when this happened to me, when i returned to the CW most loccations (if not all) were respawned.

The question is: are you doing the quest to get a settlement to join you, or is it another radiant quest? If you are told to go there by the folks at Tempines (or any other Un-claimed settlement) you hare bugged out.

Bored P mentions finishing it via the Console (for games not Survival) and that i recommend just to be free of the headache this gives you. The wiki has the needed info on it i think.