Elite Dangerous

Elite Dangerous

Robert Morris (Banned) Apr 25, 2021 @ 9:17pm
Turning off the power at a settlement?
I have tried this many times. What do you have to do to be succesfull?
Originally posted by Radium:
Yeah you can use the E-breaches to hack panels instead of cloning auth, but cloning auth is free and allows you access to the entire settlement if you obtain LVL3, should things go sideways.

The Energylink mode is indicated at the bottom right when it's equipped. I think the default key is R to Switch Tool Mode, but check your keybinds if you're unable to switch the tool mode.
< >
Showing 1-5 of 5 comments
Sighman Apr 26, 2021 @ 12:54am 
Clone a level 3 ID from an NPC, be stealthy about it. If you can't find a level 3 NPC, clone a level 1, use that to get into a building, clone a level 2, etc.

Next, locate the panel to switch off the settlement alarms. If you don't do this, a Viper full of commandos will appear when you turn off the power. This panel will be in the CMD building, if there is one, or a major building if it's a larger base, or the PWR building itself if it's a small base.

Now you can get into the PWR building and hit the panel to turn the power off. I get onto the roof and hide at this point. On your way out, stand in the doorway, cut the panel and overcharge the door so it remains locked open. It takes about 2 minutes for the power to go down.

When the base power goes down, enter the building, take the regulator and run for it, jumping roof to roof.
Robert Morris (Banned) Apr 26, 2021 @ 5:03am 
I will give it a go. Will the NPC sound the alarm or attack you if you try to clone them? Excellant advice btw. Thanks you.
Last edited by Robert Morris; Apr 26, 2021 @ 5:40am
Radium Apr 26, 2021 @ 6:54am 
Originally posted by Chaos theory:
I will give it a go. Will the NPC sound the alarm or attack you if you try to clone them? Excellant advice btw. Thanks you.
Yes. Don't get seen by them, crouch to sneak around behind them and ensure you are not spotted in restricted areas, and you can pull this off.

Keep in mind there will be workers in the PWR room. Silently take them down with the Energylink Overload Mode (this will incur murder charges if you're in a lawful settlement), or follow the advice above - sneak in, turn off the reactor and then run out and hide. Just be aware that the AI will try turn the reactor back online when it finishes shutting down.
Last edited by Radium; Apr 26, 2021 @ 6:54am
Robert Morris (Banned) Apr 26, 2021 @ 7:08am 
Originally posted by Radium:
Originally posted by Chaos theory:
I will give it a go. Will the NPC sound the alarm or attack you if you try to clone them? Excellant advice btw. Thanks you.
Yes. Don't get seen by them, crouch to sneak around behind them and ensure you are not spotted in restricted areas, and you can pull this off.

Keep in mind there will be workers in the PWR room. Silently take them down with the Energylink Overload Mode (this will incur murder charges if you're in a lawful settlement), or follow the advice above - sneak in, turn off the reactor and then run out and hide. Just be aware that the AI will try turn the reactor back online when it finishes shutting down.
How do I put the energyling into overload? Press V? Also I have a fistfull of e breaches. Can i use those on the mission?
Last edited by Robert Morris; Apr 26, 2021 @ 7:09am
The author of this thread has indicated that this post answers the original topic.
Radium Apr 26, 2021 @ 1:40pm 
Yeah you can use the E-breaches to hack panels instead of cloning auth, but cloning auth is free and allows you access to the entire settlement if you obtain LVL3, should things go sideways.

The Energylink mode is indicated at the bottom right when it's equipped. I think the default key is R to Switch Tool Mode, but check your keybinds if you're unable to switch the tool mode.
< >
Showing 1-5 of 5 comments
Per page: 1530 50

Date Posted: Apr 25, 2021 @ 9:17pm
Posts: 5