What are the stock settings for Dynamic Mesh options under video in Alpha 20?

[Chargeit]

What are the stock settings for Dynamic Mesh options under video in Alpha 20? I messed with mine and can't find a way to convert to stock or find examples of the settings online.

[Shadowcub]

I'm pretty certain I haven't messed with my settings for this.

Dynamic Mesh Enabled: Yes
Mesh Distance: 1000
Mesh Quality: Yes
Land Claim Only: No
Land Claim Buffer: 3
Max Region Loads: 1
Max Mesh Processing: 3

[Chargeit]

Ursprünglich geschrieben von Shadowcub:

I'm pretty certain I haven't messed with my settings for this.

Dynamic Mesh Enabled: Yes
Mesh Distance: 1000
Mesh Quality: Yes
Land Claim Only: No
Land Claim Buffer: 3
Max Region Loads: 1
Max Mesh Processing: 3

Thanks!

[Green1]

Mesh distance 500 is stock.

[Chargeit]

Ursprünglich geschrieben von Green1:

Mesh distance 500 is stock.

Thanks

[SkepticJoker]

Ursprünglich geschrieben von Chargeit:

Ursprünglich geschrieben von Green1:

Mesh distance 500 is stock.

Thanks

Stock, default? My mesh distance was set to 1000, by default.

[Capt. W. Schwartz]

Ursprünglich geschrieben von SkepticJoker:

Ursprünglich geschrieben von Chargeit:

Thanks

Stock, default? My mesh distance was set to 1000, by default.

Same.

[Loner]

Ursprünglich geschrieben von Shadowcub:

I'm pretty certain I haven't messed with my settings for this.

Dynamic Mesh Enabled: Yes
Mesh Distance: 1000
Mesh Quality: Yes
Land Claim Only: No
Land Claim Buffer: 3
Max Region Loads: 1
Max Mesh Processing: 3

I can confirm these are defaults. It can be restored via registry too.

[CrazedTrucker]

just a heads up, this messes with the gpu,ram,cpu performance greatly..I'm talking maxing out all 3 and running the cpu,gpu at higher temps. My daughters computer we had to disable this as when it was enable it maxed all 3 usage and ramped up her gpu temps by roughly 10 degrees. So just watch it when adjusting the settings. there was another thread about this about 4-5 days ago.

[Loner]

Somebody made a guide with pretty good mesh settings, you should take a look.

[Chargeit]

Ursprünglich geschrieben von Loner:

Ursprünglich geschrieben von Shadowcub:

I'm pretty certain I haven't messed with my settings for this.

Dynamic Mesh Enabled: Yes
Mesh Distance: 1000
Mesh Quality: Yes
Land Claim Only: No
Land Claim Buffer: 3
Max Region Loads: 1
Max Mesh Processing: 3

I can confirm these are defaults. It can be restored via registry too.

Yeah they seemed right to me. I switched and it seems to be running properly.