Zeroing WAY too fast

[Construm]

Hi. If my target is i.e. 450m away, I have trouble zeroing at it. It keeps jumping between 100m and 600m in a millisecond because the dials move WAY too fast... Is there a way to reduce the speed and make the input more "smooth"?

[Testdrivelord99]

Yes under controls.
You can set the speed lower there.

[R.A.T. Army *MST3K*]

I sent my zeroing on my tanks to the mouse scroller and that seems to work pretty good for me.

However it does adjust the sights when I zoom in and out the radar. Which is pretty annoying.

[Foxtrot39]

I usualy bind a key for activating the zeroing mod and another for the up/down/reset

Settig axis sensivity to minimum make it a lot more easier to get to the right value without going from 0 to 1km in a split second

[Construm]

Originally posted by R.A.T. Army *MST3K*:

I sent my zeroing on my tanks to the mouse scroller and that seems to work pretty good for me.

However it does adjust the sights when I zoom in and out the radar. Which is pretty annoying.

Okay, took me a while, but I managed to set the wheel as zeroing control... problem is, it jumps in 300m increments! (0, 300, 600, etc.) I kinda want it in 50m... any Ideas?

[Construm]

Originally posted by Foxtrot39:

I usualy bind a key for activating the zeroing mod and another for the up/down/reset

Settig axis sensivity to minimum make it a lot more easier to get to the right value without going from 0 to 1km in a split second

My standard setup was "Page up / down" for distance and "end" for reset. But whatever I change (sliders) it won't go slower or smoother.

[Foxtrot39]

Well I've got an average of 50m to 100m per quick taps on the distance key

[Construm]

Originally posted by Foxtrot39:

Well I've got an average of 50m to 100m per quick taps on the distance key

I'm not that quick... ;P

[Boatabike]

there is a setting under options, i had the same prob, i will try and see if i can find it again...

[Foxtrot39]

Originally posted by Construm:

Originally posted by Foxtrot39:

Well I've got an average of 50m to 100m per quick taps on the distance key

I'm not that quick... ;P

Well its pressing just as long like you where writing something

[Construm]

Originally posted by Boatabike:

there is a setting under options, i had the same prob, i will try and see if i can find it again...

I think I already found that option... lots of different sliders, but they all seem to do NOTHING. Mousewheel only does 300m increments, no matter what I set up. Same for keybindings... 50m steps, but way too fast. Seems like none of the sliders has a function. Or maybe it's for Gamepad only, Idk.

[Boatabike]

it seems to have changed in options since i adjusted mine but try under tank and common guessing it is one of those sliders there

[RAM AIR IV]

Where is the mapping thing at in the controls to zero?

[Kay]

You can set "scroll wheel in tank battles" to sight ranging, and it'll go in increments relevant to you tank (up in approx 300 metres for things with high muzzle velocity, up in approx 50 metres for things like the FV4005)

[RAM AIR IV]

Originally posted by Ki'agh:

You can set "scroll wheel in tank battles" to sight ranging, and it'll go in increments relevant to you tank (up in approx 300 metres for things with high muzzle velocity, up in approx 50 metres for things like the FV4005)

Ok thanks!

[Construm]

Originally posted by Ki'agh:

You can set "scroll wheel in tank battles" to sight ranging, and it'll go in increments relevant to you tank (up in approx 300 metres for things with high muzzle velocity, up in approx 50 metres for things like the FV4005)

This doesn't make any sense... I.e. the Leopard (2nd): When I adjust with the (way too fast) keys, I get numbers like 250, 300, 350, etc. but with the scrolling wheel I only get 0, 300, 600, 900, etc. you know what I mean? I think it's not about the tank...