PI = Pilot
FI = Flight Engineer



(FI) Main Power - On
(FI) Battery Voltage - Check Above 0.9
(FI) APU - As Required
(FI) Fuel Imbalance - Check and Adjust
(FI) Fuel Used - Reset

(PI) Fuel Used - Reset
(PI) Rotating Beacon - On
(PI) Parking Brake - Check Set
(PI) Gear Lever - Check Down

(FI) Throttle - Set 3.0
(FI) Circuit Breaker Engine - Check On

(FI) Starter #3 - On
(FI) Check Propeller Turning
(FI) Wait for Engine RPM above 0.5
(FI) Fuel Switch #3 - On
(FI) Wait for Engine RPM above 1.0
(FI) Starter #3 - Off
(FI) Generator #3 - On

Repeat for Engine 2,4,1.

(FI) Hydraulic Pump E2 - On
(FI) Hydraulic Pump E3 - On
(FI) Hydraulic Pressure - Check

(FI) Circuit Breaker Heat - On

(PI) Navigation Lights - On
(PI) Strobe Lights - On
(PI) Avionics - On
(PI) Instruments Lighting - As Required
(PI) Cabin Heat - As Required
(PI) Throttle - Set 5.0
(PI) Avionics and Autpilot - Check and Set
(PI) Annunciators - Check



(PI) Taxi Light - On
(PI) Hydraulic Pressure - Check
(PI) Disbale Nose Wheel Steerig - Check Off
(PI) Main Wheel Steering - As Required
(PI) Parking Brake - Off

Taxi with Throttle between 5 and 10.
Use Space Bar and Propeller Reverse for Braking.

(PI) Unfold Wings - When outside of the Hangar and no Obstacles.

(PI) Flaps - Set for Takeoff



(PI) Flaps - Set 0.2 (20°)
(PI) Landing Light - ON
(PI) Throttle - 10
(PI) Annunciators - Check all Warning and Cautions are dark
(PI) Throttle - 20



(PI) Flaps - Set 0.35 (35°)
(PI) Landing Light - ON
(PI) Throttle - 10
(PI) Annunciators - Check all Warning and Cautions are dark
(PI) Throttle - 25
(PI) Rocket Boosters - As Required - when Airspeed is above 40 km/h.