Subscribe to download
Deadman switch Main Controller

This is a Deadman switch which will set the throttle to 0 when the player leaves the vehicle.
This system is infinitely Scalable meaning you can have as many player sensors as you need to cover you vehicle/craft size.
So you vehicle/craft does not take off from you

---

1. This system works off of player sensors so place as many as you need around your craft to get full coverage
   
2. Place a Player sensor controller for each sensor, or if using multi connect ones then place those and connect sensors
   
3. Connect the Comp out to the Comp in of each player sensor controller
   
4. Connect the last player sensors controllers comp out to the main controllers comp in

1. If you're not going to use an instrument panel to control the Deadman the skip to step 5
   
2. Set you're instrument panel up like the following:
   
   
   Type

   Channel

   Name

   Indicator

   1

   Player Detected

   Flip Switch

   2

   Enable Deadman

   Button (push)

   4

   Reset
3. Connect the status panel in and status panel out to the main controller
   
4. Skip to step 7
   
   
5. IF NOT USING INSTRUMENT PANEL SKIP TO HERE Connect the enable to a toggle button or key
   
6. Connect reset to a push button
   
   
7. Connect the throttle in to your throttle
   
8. Connect the throttle out to your engine or other controllers you're using

---

All you have to do it toggle the enable switch/button and the system will work.
If you happen to fall off the boat once you get back on you have to press reset to re-enable your throttle control.

---

Player sensor controller
https://steamcommunity.com/sharedfiles/filedetails/?id=3396320051
Demo creation
https://steamcommunity.com/sharedfiles/filedetails/?id=3396318912