Increase Seige range by a few to fix AI seige army getting smoked by the forts I suggest

How is the crash issue currently?

@Gwendoline
It works in quick battle skirmishes. Multiplayer I'm not sure. That last update screwed things up bad an I have no idea how to fix it.

Does the mod still work? We cannot seem to play it.

@bibis einbauschränke

The game does not support campaign play as it uses campaign entries within the game files for the new units and buildings.

It only supports skirmish and multiplayer (latter is somewhat buggy due to the last game update).

Hi , if i try to start a Conquest on the world map the game bugs and floods all mapps so they become unplaybel , any idea for a solution or what i might be doing wrong?

@Soviet Groot
The latest game update screwed up a bit and I still do not know how.

@arisian stormbow
Check the 'Common Problems and Fixes' thread for info on how to solve some common crashes.

@Mr.D
No, sorry, it doesn't as it uses campaign only unit/building slots for the new units and buildings.

works with campaign?

My game crashed to dekstop

unstable mod

Still enjoying the mod after all these years. Thanks.

@Keftes
Yeah, certain maps don't work with the new Big Huge size since it's 20% larger than the previous Big Huge. Set it to Huge or lower to avoid crashes.

Thanks for the answer. Also my game crashed when playing on big huge great sahara.

@Keftes
Try the usual fixes:
1. Make sure this is the only mod you have enabled.
2. Unsub and resub
3. Install the mod manually (link in description - modDB)

I'm stuck on 200 pop, and researching military technologies doesn't change it. How do i fix it?

@Yorin

Not actively, no. The only remainder is graphical improvements, but I can't model for shit so I need someone else to do it.

Hey, just wanna ask if the Mod still in delevopment, because the last update is 2 years ago.

Thanks for answering

@armitron2
Himalayas should be fine on Big Huge, although you can try setting it to Huge just in case. Otherwise, do the standard fixes:
- make sure the mod is the only one installed/running
- unsub and resub to the mod to redownload the files
- manually install the mod if issues persist (link in description)

I just tried a solo game with 3 AI where there were 2 teams. One AI on my team, 2 AI on the other. The game mode was "peace until the information age". I just finished researching everything in the library except the info age advancement, and I had hit the population limit of 710. I then researched the upgrades for all military units to be the Modern Age upgrade. Shortly (maybe a minute or two) after that the game crashed saying something about a "texture buffer", and said "Safe to ignore: Unlikely" .
My gaming laptop is definitely powerful enough, and it has 16 Gigs of ram. Is it because I tried the Himalayas map on "Big Huge"? I didn't read anywhere in the comments that the Himalayas map should only be "Huge" size.
I do have a save of the game, but the save is like 30-ish mins before the crash.
Any thoughts?

@Scipion

That happens when a resource appears before the age they are supposed to appear at such as seeing Buffalos before the Third Age. Once you advance to the correct age, the merchant will be able to gather the resource

Not sure if it's related to the mod, but I get an error with merchants "no room to unpack". First time I've seen that.

@STuRoK

This is normal. The game multiplies the costs in the files by a factor of 10 so that the factor can be higher/lower depending on the tech cost setting in the match setup. If you want lower cost put the tech on Very Fast and Cheap setting for a lower cost factor.

I have an issue playing Americans, the Science first tech- Mathematics, costs 890g instead of 89, like it says in the techrules.xml. I can't figure out why it's multiplied by 10. When I play a different nation, the cost is much less, tho not 89. tested this in "Normal" costs. When I remove the techrule.xml, it goes back down to default, I presume.
Anyone else have this problem? Any solution, please?

The population is already increased to 500 but you can edit it further.

Just use this guide:
https://steamcommunity.com/sharedfiles/filedetails/?id=270543375

and use the folder ...\Steam\steamapps\workshop\content\287450\955633861\data for the edits.

Does the more population mod work with this mod then?

@DRESDEN
Read my previous comment and try that.

when i play with my friends if i host gets stuck on verifying files and wont time down, but when my buddy hosts it works fine but he crashes near the end game,if anyone could give insight that would be wonderful.

Thank you for responding, I'll give it a shot and let you know how it goes

Make sure the mod is the only one installed. It doesn't work well with other mods. If that doesn't work, try installing the mod manually (link to ModDB file is in description).

Mod keeps crashing like 1-2 hours in. Awesome mod but can't recommend if this isn't fixed

i keep running into a debug issue about an hour into the game. and it doesnt matter if i choose retry or ignore, it closes out the game after i choose. and if i just try to go back into the game without choosing, it's just a black screen with audio.

@DeMOiX

The AI has a script which makes it perform a little better but it doesn't know how to utilize certain unique units or buildings properly. For example it uses raiders as just another infantry unit in the army and doesn't for example, build naval forts or naval towers as well as some other buildings.

Despite this, with the script it still proves somewhat of a challenge to beat, especially on higher difficulties (Tough ->).

I'm confused about AI. The description says AI is not supported but the comments say it does a pretty good job. So does AI is aware of the new changes of this mod?

@GoTeamGoSportz

Set the AI difficulty higher than Easy - even the original AI was a pushover at that difficulty. If you're playing against AI, set it to Tough or higher and make sure you enable the "rota ai script" in the scripts section of the game options.

For the full experience, play the game in multiplayer instead.

GoTeamGoSportz

Well that's because you played on easy, my brother and I usually play on tougher and I gotta say unless you start at the nomad era, the AI for the most part do a good job of advancing, the only real problem I can think the we've had is every now and then you get some slow ones, but that's why we usually play with 6-8, the weak ones are killed of fast and toward the endgame you meet more determined opponents, please also note that the higher in difficulty you go up, the more the AI doesn't play fair, that's just Rise of Nations

I just downloaded it and played on easy to just to get an idea for how lengthy it really is... And the AI is absolutely horrible. I was near the modern age and they never advanced past the first age. Is this an error?

<3

wow, thx a lot for that. great mod, btw! i am playing it with friends, and we all love it a lot.

@Morbius
There is a picture on modDB, it's the first one. Click it then click "see full resolution" or something similar at its top. It has listed all nations, unique units, wonders and governments.

i mean i read the info on moddb, but is there a list like: persians: they have this and that. germans, they have this and that. like an overview per nation?

is there a list of all the special units and advantages that each nation has?

These latest reports are very strange. The game is working fine on my end.

As for loading saves that were made with a previous version, those won't work since the save was made on an older version.

Anyone still having issues try downloading the version from ModDB and installing it manually or try unsubbing and resubbing to the mod through the workshop. If you're installing it manually, make sure that you change to the <LOCAL> version in the game's options (Extras->Steam Workshop) and disable the mod that isn't local.

I got to the information age as Chinese, and as soon as I upgraded my infantry, they each lost 2/3rds of their health but became a single unit, instantly bringing my population to 2000. Also, most of the units were unuseable (said they couldn't attack things). I do have a couple other mods installed, so might be that, but was just letting you know.

Oh I just wanted to tell ya; the Taj Mahal still decreases the caravan limit
https://imgur.com/a/w0CtsSd

I tried the manual install from ModDB, unfortunately my games still crash mid to late game. Are there certain gamemodes that conflict with this mod such as diplomacy? I really can't wrap my head around why these crashes occur.

I also got the same problem so I thought maybe if I could download the manual version it could work but it didnt

So after the update for some reason I can't load any games with the mod. Without the mod, the game loads fine. With the mod, right before it loads into the game, it crashes to desktop. No error message or anything. Game just quits.

@SteelDusk

Yeah it seems that the caravan bonus doesn't work no matter what number I put in. I've removed it and raised some of the other bonuses.

As for the commerce limit - it's hardcoded to +999, so I can't raise it.

Also, there seems to be another bug; the Taj Mahal wonder is supposed to increase the caravan limit by 2, but after completion it instead decreases the limit by one, especially in games where I have researched commerce to the max. Can you look into this?

Here's a screenshot:
https://i.imgur.com/iiIxhWh.png

@0wca

Thank you! Anyway, is there a way to make the commerce cap go past the +999 limit (especially for very expensive tech games) or is it too hardcoded?