"Spell-Forged Steel? That's cute, I have Fallen Star-Forged Steel!"
- Ser Arthur Dayne, Sword of the Morning

I appreciate it, though in the interest of full disclosure, I haven't touched this in quite some time. Given the overall pace, I might never get around to all of them. Then again, the release of a new ASOIAF book or a new Elder Scrolls game might very well spur me to speed things up.

There have also been a lot of requests for Dawn, which is currently in a long-ignored, half-finished state.

Here's a list for the remaining ones:
Vigilance: The Hightowers'
Truth: Last wielded by Moredo of Lys
Sandoq the Shadow's Curved Blade
Orphan-Maker: The Roxtons'
Lamentation: The Royces'
Widow's Wail: Oathkeeper's Sister Blade
Brightroar: The Lannisters'
Celtigar's Axe
Littlefinger's Dagger
Red Rain: The Drumms'
Lady Forlorn: The Corbrays'

Perhaps also add these?
Aegon the Conqueror's Crown
Euron's Armor

I'm aware that's a little vague. Sorry about that; it would be a little too verbose to give a full explanation there.

The item IDs are based on mod load order, so I can't tell you exactly what they will be in your case. Specifically, the first two digits indicate that they came from this mod. For that reason, although the digits will vary from person to person, they will be the same between swords for a given person.

Due to all of this, what you need to do in order to find the IDs is type help "Longclaw" 4 and replace all of the ??s in my listed IDs with the first two digits of the result.

The details of the command I listed are pretty arbitrary. The "Longclaw" part just needs to be the name of one of the items in this mod, with the caveat that the name "Ice" won't work because it will match too many game resources. As for the "4" part, that merely filters out some additional information that you don't need. It's not strictly necessary.

what do you mean the first 2 digits vary?

thx

It's available in both locations. Nexus Mods has versions for standard and SE, Bethesda for SE only. I don't think I've uploaded an SE version on the Steam Workshop. They should be fairly easy to find, but I think I've posted links in these comments somewhere if you need them.

Can this be ported over to the Bethesta modsso it can be used for special edition. If not is it available on the nexus?

I'll keep that in mind when I remake Longclaw.

As for Brothers of Darkness (or any other book), I'd recommend searching the Unofficial Elder Scrolls Pages (UESP) or the Skyrim Wikia. Apart from that, it should be obtainable as random loot.

where do u get brothers of darkness

well that bring up another problem that, long claw is to long. hand and a-half swords aren't that much longer than arming swords and your long claw is the size of a normal two handed sword

I'll take a look at that. As for Longclaw, however, a long handle is consistent with it being a hand-and-a-half sword. (Of course, I plan to remake that sword entirely sooner or later.)

i think you made the grips just a bit too long on oathkeeeper, longclaw and darksister. it almost makes them like diffrent styles of swords altogether.

Good news!

Today, I finally decided to finish my remake of Ice. I'll update the mod as soon as I'm feeling up to changing the screenshots. Probably today or tomorrow. I'll probably see about uploading the mod on those other sites while I'm at it.

Glad you like it.

Regarding Vaultboy's request, I just realized I still haven't followed through on uploading it to those other sites (though it is on Nexus Mods, where it has a longer description due to the lack of a character limit).

ITS NOCE!!!

cant wait!

I'll probably get to that over the next few weeks.

super simple really, i just have a mac is all. just use this.. http://www.creationkit.com/index.php?title=Main_Page

I'll look into it. I don't think those options existed when I first made this, so I've never tried to upload mods there, but I'll do that at some point.

port for bethesda.net and xbox? would love to use these there too!

That's a funny story, actually. I initially made it two-handed, but I changed it after a number of people mentioned that it is in fact supposed to be a longsword, not a greatsword. I get the impression it might have been intended as a hand-and-a-half variety, so I'll probably try to add equip-mode switching at some point. That's quite involved, though, so it's not a short-term priority. In the mean time, I've been working (off and on for quite a while now) on a remake of Ice. It's much prettier than the old one, so I hope that will suffice for now. (Of course, that's not done, either. It's much closer, though.)

I WANT BLACKFYRE 2HANDED !!!!!!!!!!!

The main reason why some are blockish is that I learned to use 3DS Max specifically to make this mod. My earlier swords were therefore my first experience with the program. I've been working on a remake of Ice, though.

they're just kind of blockish, I guess, you accomplished what you set out too, in that the blades are accurate in alignment with the books, but they don't look like real swords, like the show makes them.

I'm not quite sure what your point is. Do you have a problem with how they look in this?

I'm not saying they're wrong "based solely on the show", but I do have some beef with them includig the show, yes they're "more accurate" in alignment with the books, but at least they tried to make them look like real, useable weapons in the show.

I'm planning on adding it at some point. It might go in a separate mod since it's not technically Valyrian steel, but I'll add a link in this mod page if I take that route.

Any chances of creating Dawn?

Hmm? Those item codes aren't the commands themselves; the command you want is
player.additem [item code] 1

Before you can do that, though, you need to find the item code for the sword you want. To do that, type
help "[sword name]"

The reason why this is necessary is that the first two digits of the item ID vary depending on the mods you have installed. However, the first two digits will be the same for every sword in this mod; I just don't know what they will be.

The reason why I listed the IDs at all is that, in the case of Ice, simply typing help "Ice" will yield results for everything in the game containing the string "Ice" (which is a lot of things). Therefore, to find Ice's ID, search for any other sword in this mod and use the first two digits of that sword's ID with the last six digits of Ice's ID from the description.

the commands dont work...

If you mean the books required to craft the items, you should be able to find their locations on the UESP or the Skyrim Wikia.

Where can I find books

Thank you. I appreciate that.

Thank you for putting the time in to do this mod. It is a wonderful add to the game.

I plan to make Dawn at some point, but I might put it in a separate mod since it's technically not Valyrian steel. If I make it a separate mod, I'll add some way to find it from this page.

Could we get "Dawn" the sword returned to House Dayne by Ned Stark after the Tower of Joy incident.

Deadflame, I should mention that I messed up on the Blackfyre model. It looks cool (in my opinion), but I failed to take into account some information about its appearance that is mentioned in canonical sources other than the books themselves. I made it a flamberge, where it was apparently supposed to be a hand-and-a-half sword.

nevermind

where do you get "the dragon war"?

http://www.nexusmods.com/skyrim/mods/71515/?

Thank you :))

It's up on Nexus Mods.

I guess I'll do that now.

When you think you will upload? :)

Thank you :)

Sure. I'll put it on Nexus Mods, probably this weekend. I'd planned on doing that eventually, but I didn't have a reason to go ahead and do it until now. I'll post another comment when it's up.

i cant download mods from workshop i dont know why. :/ can you upload in other site? please please please?

Glad I could be of help.

BLACKFYRE *.* ive serch for this for years