I hope this is still updating, the new print and play off the kickstarter looks very exciting.

Hello, I can't seem to find the bat setup. All the others work well, thanks for the game!

I subscribed to it on the workshop but it doesnt download :(

Fixed the faction select issue and frog cards / pond interaction. Thanks for the notices guys!

error at faction select

Index error with the new update.

the pond has a fault. Frog cards placed there move automatically to normal discard pile.

@Ehss Oh so if there is a vagabond in the game (and therefore no knaves) the vagabond uses the knaves warriors to interact with the assembles, that makes sense.

@Koretex - Yup. Check out step 2 of Bat's setup. :)

Just thought i'd let you know that the Knaves warrior supply spawns with the Bats

@z|fn@b: You're awesome. Thank you for the help!

@Weide: Good catch on the lizard's outcast marker! I think I fixed it. I agree with z|fn@b about the cats though. I tried spawning them a couple different ways; they look like they have enough warriors (25) in total. Any other details of what you found?

@Freon: you r supposed to SEAT around the table (clic your username on the top right and then 'change color'). then you r supposed to use cameras eventually: Ctrl+1, Ctrl+2... to set them, Shift+1, Shift+2 to recall them. if u REALLY want to turn the boards (you shouldn't), u can hover them and press L (toggle lock/unlock) and press A or E a few times to rotate.

@Neauty: u can have them try: menu > configuration > game: uncheck 'mod caching'. then have them leave and rejoin. it might help.

@Weide: std setup was 11 starting warriors on the map for the cats (the 14 others are in their warrior container). advanced setup: cats start with 15 warriors on the map.

ANother new bug (also is there a discord where we can report them ?). With the Marquise de cat, using the standard setup table, with don't spawn with enough warriors (unless the amount of warriors we spawn with is different from the advanced setup, but it still not enough iirc).

My friends and I tried to play, but it seems like that for my friends who use Linux won't load the GUIs on the boards (So the board where you choose your factions from and the main board which lets u setup). What can I do?

How do I turn the game boards around so they are facing the correct way? Right now they are facing out from the game board and I cant move the player boards easily.

New small bug, the lizard faction, when using the advance setup, spawns without the "outcast marker".

@Rose Borger you can play against "Clockwork" factions which are changed versions of base factions that have a set of rules and rolls that you follow to play against them, its no where as good as playing other people but its still pretty fun. Most custom factions don't have a clockwork version however and some custom factions may not work properly against clockwork.

Just a few questions. So this cannot be played by only 1 player, right? Even though this page says it's from 1 to 6. Also, only the start menu is scripted, right? Not the game itself

Bug report : small one, we can't pick up the 8 starting keeper warriors when playing the badger faction

@eurobeat - setup can be found on the back of the faction boards (alt-shift on mouse hover).

@Your_local_idiot - The HUD is a problem, but we made 2 work arounds:
1. You can reload the mod when everyone's in.
2. You can find a reset button for the board: on the front left of the table, there is a white button. Click that. There's a brown button that says "Reset Board". Click that and it should help.

You don't have to use advanced setup! You can click all the buttons necessary on the setup board to get the pieces you need: faction boards, maps, decks.

The Advanced Setup is useful, though, because it gets you all the pieces necessary quickly. If you don't like the Adset Draft, don't worry! You can still select whatever factions you want:
At the faction selection screen (the one after the map, deck, bots, landmarks, and hirelings), the top right button has 4 factions. Click on that. It'll let you choose any faction you want (except those removed for bots and hirelings, of course).

Hiya, attempting to play the game, but only the host can see the HUD isnt displaying anything for anyone aside from the host. Is this a know issue and is there a way around it?
Also is there a way to play without using the advanced setup?
Thanks!

Many of the fan factions look interesting but have no setup documents and no way to find them by google, such as turtle nomads, who seem to just not even /exist/ outside of TTS and I assume discord. I'm rather anxious and don't like joining random discords for short periods just to grab documentation, so does the discord maybe have any collected fan-faction setup guides/rules?

@Yumi - Are there factions from Rootjam 2023? :O What am I missing?

@CHARMANDER - try deleting and reloading the whole thing. Hopefully that helps.

will you add factions from rootjam 2023 or any other rootjam in the future?

Has anyone else been getting an error message "Save is too large to transfer" every time they try to open this game?

Ah, we'll have to try on the save/reloading trick next time, thank you. I could be barking up the wrong tree, but I figure it has something to do with the host/client side. Like I said before, from what my group has seen, the host is unaffected and everything is working properly on their end, it's only those who join who are having problems. Not sure how likely or possible it is, but could one of the scripts be conflicting with TTS? Though not sure why then the host would be immune...

These have been issues in the past. I'm not sure what's causing them; people tell me it's just TTS being wonky. Saving and reloading tends to solve the issue, but I'd really appreciate any other insight as to possible solutions to this problem because it's probably the biggest issue of this mod.

Not sure if its on tabletop's end, the host's, or the mod's, but the last few times my group has played this we've ran into some issues. These range from some players' cards being visible to others even while inside their box, sometimes when dragging a card out of a player's box it only shows the back of the card until put into a stack, and the UI showing your cards at the bottom of the screen is missing. These problems don't seem to happen on the host's end. Before the most recent update none of these happened, but that could be coincidence.

@Conro. Got it and fixed it. :) Thanks!

There's an error with the vagrant character card, the front image url is surrounded by brackets so won't load

@Gentlemann - We're *maybe* going to do another wave of new factions. It's a process, so progress might be slow, but reach out to us on discord for easier communication and help getting your faction into our mod. :)

hey guys, I made my own new "faction". An attempt do make a good true single meeple faction similar to the vagabond, but I tried to make it much more fun and rewarding to play against.
and not as weak as the snake.

its basically a big grizzly that just wants to sleep, but is disturbed by all the noise in the wood.
I would love for you all to give it a try, and maybe tell me what needs to be done to get it into this mod?
also feedback would be nice

If you want to be assured of the quality of the game you're playing, get the other one.

Root+All Expansions (Eng/Ita) Has just official content, meanwhile this has plenty of fan made tools, factions, decks and maps, I'd argue this is better.

What is better? This or the "Root+All Expansions (Eng/Ita)" version? This one has not been updated in a while it seems (Feb 2023) but still popular.

Hopefully the new Expansion's content will get added when its P&P releases on the KS... well, whenever that might happen.

@Glorious Corgi If a faction doesn't have an advanced setup card, they will still have a setup instruction on the back of their board

Awesome game and I love the custom factions, but I am a bit confused on how the setup works for some of the factions. There isn't an information card for a lot of them so I don't know how they start. Is there any way to figure this out or do I have to guess?

So this is partially scripted, right? you still have to place the pieces yourself etc etc

@Crumpetitive thank you!

@GratefulStreetlight Use the summer board. The summer board is the autumn board layout just with adjustable board suits

Is there a way to randomize the board suits on the autumn board?

Where are the vagabond quest cards?

The Redguard are missing is missing most of its content, Boarish hordes is missing it's board and the temple guard is lacking a bag/stack for the coins

Can't load atm

ive noticed that sometimes my friends cant see their soldier supply or some of the board aspects but ive been able to fix them by just Unlocking and then Re-Locking those supplies or parts in the right click menu

Hey! I love this game! Also I figured out how to fix the issue where other players can't see their own cards. It is easily fixed by putting the drawn cards back and re-dealing cards to them. Dumb fix, but it works.

Hosted a game where the other three players couldn't see the setup board contents at all. We tried several things, gave up, used another mod, but came back for our second game and then it worked long enough to start a game. We did finish the game but my players noticed the setup board contents disappeared again when they had to log back in

Friends can't see the setup board when we start a game.

I don't have the six player boards when loading the game, do we need to grab the player board from the menu manually? I have loaded the game several times and the table is still empty.