Steam 커뮤니티 :: NSR - D22S Shunter

상점 페이지

Stormworks: Build and Rescue

전체 토론 스크린샷 아트워크 방송 동영상 창작마당 뉴스 가이드 평가

Stormworks: Build and Rescue > 창작마당 > Terr-Rawr-Saur 님의 창작마당 > NSR - D22S Shunter

NSR - D22S Shunter

설명 토론0 댓글24 업데이트 노트

댓글 24개

< >

timo3441 2022년 11월 29일 오전 10시 01분

Thanks

Terr-Rawr-Saur [작성자] 2022년 10월 14일 오후 1시 07분

Ive set it up so that all locomotives are the leader of their own train until the "follower" flip switch is turned on and then they become a follower which means they ignore input from their cab and copy any leader locomotives cab input. "Invert Reverse" is used if the follower locomotive is facing backwards in relation to the leader locomotive. The train frequency is 0 by default but it can be anything you can put into a keypad, as long as the leader locomotive and follower locomotives are using the same frequency it will work.

timo3441 2022년 10월 14일 오후 12시 26분

Your creations are all very cool! But i have one probably vvery stupid question: ho does the nsr follower system work? Do you haave to activatte it on all trains or only in the leading/following one?

Davis 2022년 9월 12일 오후 2시 23분

Nice

Mr Donut-36 2021년 2월 15일 오후 4시 35분

So cool, i am going to award this.

Terr-Rawr-Saur [작성자] 2021년 2월 7일 오후 9시 49분

@Dr. Death. Haha, Yea I'll see about adding a heater.

Dr. Death 2021년 2월 7일 오후 7시 30분

I only have 1 complaint. Can a heater be added so that we could use it on the arctic without the specialized clothing? Even a small one is enough.

Terr-Rawr-Saur [작성자] 2021년 1월 23일 오후 4시 52분

@Mr. Xanderson. You just need to flip the "Invert reverse" switch on the dash. It is beside the follower switch and follower frequency keypad.

Salad35 2021년 1월 23일 오후 3시 58분

I have only one problem with this; I want one of the locomotives to be facing the opposite direction of the other one, but I can't because it will refuse to go the same direction.

Nisse 2021년 1월 23일 오전 4시 43분

Thank you so much it works now!

Nisse 2021년 1월 23일 오전 4시 24분

thx il try

Terr-Rawr-Saur [작성자] 2021년 1월 23일 오전 3시 32분

@The Gaming Soviet,If you are not using my modified padded seat, try deleting the drivers seat and placing your own padded seat. That should forcibly disconnect all the logic nodes.

Nisse 2021년 1월 23일 오전 2시 55분

Hi im back i have a slight problem here... So when i jump out of the locomotive when its driving it starts to drive backwards. Is there a fix for that?

Genubath 2021년 1월 20일 오후 6시 31분

Thanks!

Terr-Rawr-Saur [작성자] 2021년 1월 20일 오후 6시 05분

@Genubath. I've added a button to the cabin that will work alongside the seat input. You should be able to switch tracks from the cabin now.

Genubath 2021년 1월 20일 오후 5시 39분

There doesn't seem to be a way to switch the tracks from inside the loco

Terr-Rawr-Saur [작성자] 2021년 1월 19일 오후 3시 24분

@TGF PhillyAce, Seems like some parts got replaced somewhere along the line. I've just uploaded the fixed version. There is now a fluid hose anchor beside the pump instrument panel on the right side of the shunter.