Train Simulator Classic 2024

Train Simulator Classic 2024

Albula Line, Engadine and Bernina Pass Lines
53 Comments
Danny  [author] Oct 16, 2023 @ 7:39am 
Found out where Heidi - Express is (Fillisur) which is a station on the route - although for one i don't own it, and secondly it would most likely have a different route point of origin (where tile 0,0 is set) so would be difficult to connect - but also would also have differences in terrain textures which would be a pain to do sadly, so sadly no I can't ,
Danny  [author] Oct 16, 2023 @ 7:35am 
I'm not even sure where those routes would even connect - but i think they probably would have a big gap between this route and those two routes?

(Surselva and Heidi Express probably have different point of origins too - I don't actually have the latter - I found it on just trains but doesn't look like a Rivet or Thomson Interactive route though? )
Luk4s Oct 16, 2023 @ 7:29am 
Hey there.
Would it be possible for you to add the "Heidi-Express" Route and/or the "Surselva-Line" as well. This would be unbelievable.
Paulokomo Jul 1, 2021 @ 4:09pm 
Greatful work ! Much place for great journeys. Thousand thanks !
Danny  [author] Mar 25, 2021 @ 2:45pm 
Route now set as final (so scenarios can now be uploaded) (I did give a big chance to say bugs - you can't say that at least :) )
Danny  [author] Jan 10, 2021 @ 3:24am 
I know you are eager for that route - but at present I have other things to get done - this route (this page for example - I was trying to see if I could press final and other routes that i've been trying to get finished too). The frankfurt route has been put on the back burner because the signals don't work as they should (so i'm waiting for DTG to fix them - and in this case they do want too - when however is another question).
msts Jan 10, 2021 @ 1:57am 
Danny have you a time to spend it at the route whe will so mutch to have the route. it gives a lot of scenario building and a much time to ride the route
msts Jan 9, 2021 @ 12:42pm 
okay so its am busy with the coupling of this routes al for a lot of time and it will not work.
and last hour i think at you.
Danny  [author] Jan 9, 2021 @ 12:40pm 
It's smaller than one of the other routes :) - I have a preference for workshop but I haven't looked at the route for a while
msts Jan 9, 2021 @ 12:22pm 
I think than the file its to large. maybe you can try it by any community as Rail-sim.de
Danny  [author] Jan 9, 2021 @ 11:52am 
It works, that's not the problem :) - the signals on the frankfurt to koblenz section are broken - that's the problem, and it's not a small file to upload (so it's not that it won't work as a route - just workshop won't let me upload it :) )
msts Jan 9, 2021 @ 11:50am 
Hello Danny.

I will test it for you can you package the route ? and send it to me ? i will test
Danny  [author] Jan 9, 2021 @ 7:09am 
I have done but workshop won't let me upload it. The route suffers from signalling issues which has also given me second thoughts about the route upload.
msts Jan 9, 2021 @ 6:56am 
Hello Danny I know its not the Right Topic.
but i have a question for you
will or can you try to Couple The following routes
The Route Koblenz Until Frankfurt with The Frankfurt Highspeed Frankfurt till Mannheim and Mannheim until Karlsruhe Hbf.

I hope so
Best Regards
Johan
Danny  [author] Jan 3, 2021 @ 9:48am 
I'd like to set this route as final - but just wanted to check if the issue with the missing scenery has finally gone (I need someone else to say it has but just being certain, it has for me however)
Danny  [author] Jan 2, 2021 @ 5:54am 
The below is pretty much what i would have said (sometimes it won't install because you haven't gone to the workshop tab)
Cyclone Jan 2, 2021 @ 5:44am 
Did you open the game and go to the Workshop tab? Last time something was not showing up, I went to that tab and it actually worked. Back in 2020 it tried to do things automatically and that tab always crashed the game, but it seems to work slightly better now. Note that after unsubscribing, you will maintain the item as well, so your game doesn't constantly try to refresh all of your subscribed items.
alwagner Jan 2, 2021 @ 5:37am 
This is what I have done but nothing follows ??
Danny  [author] Dec 31, 2020 @ 12:54pm 
Press Subscribe :)
alwagner Dec 31, 2020 @ 12:53pm 
how do you download the file ?
Cyclone Nov 4, 2020 @ 9:32am 
Makes sense. I have not been wanting to do stuff lately, myself.
Danny  [author] Nov 4, 2020 @ 9:28am 
At the moment finishing the ones that I already have (although being honest certain facebook groups have put me off a lot of doing much) - I do have somethings that i'd like to do, but at the moment along side the above - working from home has also put me off lots of my own things (working on the same pc - just feels like more work).
Cyclone Nov 4, 2020 @ 9:23am 
Gotcha. May I ask what upcoming projects you have? I'll look at this if I ever get the Swiss routes, but for now 0/4. Will eventually get the one in 2021. LUL
Danny  [author] Nov 4, 2020 @ 1:52am 
The only ones that can merged (easily) are WCML Over Shap and Western Lines of Scotland

(notes - easily doesn't always mean it's "Easy" - Hamburg for example was merged at Hamburg HBF so was a nightmare :) )
Cyclone Nov 4, 2020 @ 1:49am 
Ah, that's a pity. Wish these routes used the same point of origin for the stations. Removed the idea of merging them. Would be neat to merge Edinburgh-Glasgow with the main line to Carlisle if that isn't already done, though, or with Edinburgh-Newcastle...unless the point of origin problem is present there ,too (especially the latter since that's Just Trains merging with DTG). Though I think someone already did the ECML project, so it might even be out there already. Speaking of Carlisle, can all of the routes going through it be merged for a mega network?
Danny  [author] Nov 4, 2020 @ 1:28am 
I hve no plans to merge those routes (I don't have the Suburban Glasgow one) and unfortunately none of them share the same point of origin - (I can merge them in theory but would be a lot of work without a tool unfortunately which I don't have, and won't be able to get)
Cyclone Nov 3, 2020 @ 10:39pm 
I know this question is unrelated to this route, but using this as I believe it's your most recent route (you can delete it after I see the answer). My question is whether you have plans to merge Suburban Glasgow and either (or both) Edinburgh-Glasgow or Western Lines of Scotland. I'm guessing the former as I believe the latter is a Steam-era representation, and any merge with WLOS would require another Workshop version. Merging Edinburgh-Glasgow with the line to the east to Newcastle is another option, or to the ECML, or even that to Suburban Glasgow.
Danny  [author] Sep 23, 2020 @ 2:09pm 
Hopefully fixed missing assets ?
Danny  [author] Aug 21, 2020 @ 4:04am 
Unfortunately I can't as the routes don't share the same point of origin (It is possible but without an automated tool, it would be an unrealistic amount of work unfortunately). I'd love to of course merge them, but with the above issues amongst others, I am unable too.

PS - Please goes a long way ;)
msts Aug 21, 2020 @ 3:38am 
Danny can you Merge the RSSLO routes
Wiener Neustadt to Bruck an der Mur en Bruck an der Mur to Graz Hbf

and also the Tirol Austria Route Kufstein - Innsbruck - Brennero merge with the Mittenwald Bahn
and merge with the ArlbergBahn to St Anton
notamx Jul 30, 2020 @ 9:41am 
OK thanks I didn't know.
I have no issues to report

Danny  [author] Jul 29, 2020 @ 4:03pm 
The route hasn't been set to final basically - I'm just making sure there aren't any issues before i set to final (after final has been set, I can't make any more changes). I've been told that both this route have issues, but I myself can't see them. (e.g. broken track at Sameden, and missing scenery in the same area too )
notamx Jul 29, 2020 @ 2:29pm 
Hello,
I made a scenario for this route (Scuol Tarasp to Tirano, my first attempt in creating scenarios) but I can't publish it in the workshop. I get the following message:
unable to publish content, the route used by the scenario is not yet available.
what am I doing wrong?
Delfino Jul 19, 2020 @ 9:02am 
OMG You did it!!! :D
Martijn Coenen Jul 9, 2020 @ 8:41am 
Thank you so much Danny. I first checked if you created the big merge of the three lines before buying the Engadine Line :)
Danny  [author] Jul 5, 2020 @ 2:38pm 
Update - Updated distant mountain textures for whole route
Danny  [author] Jun 30, 2020 @ 5:39am 
Just wanted to ask - I've seen comments saying that the bit between Bever and Samedan is still broken - I fixed it a couple of versions ago - but wanted to see if anyone has this issue still? )
Danny  [author] Jun 28, 2020 @ 4:02am 
That would be up to Rivet Games :)
Timcool Jun 28, 2020 @ 1:12am 
Awesome merged route! I hope it will be future for Chur
Danny  [author] Jun 27, 2020 @ 6:47pm 
Update -
[*] Fixed Missing Loft at Bever
[*] Quick Drives added for all of the route.
[*] Fixed missing terrain at Ospizio Bernina
[*] Fixed Terrain Texture issues around Bernina.
[*] Replaced Route picture to be different to another merged route
Danny  [author] Jun 27, 2020 @ 2:44pm 
(Will be fixed with the next version - with the updated quick drives)
Danny  [author] Jun 27, 2020 @ 2:38pm 
Strange on that one - i thought I had fixed that, but will double check
EuroNight314 Jun 27, 2020 @ 1:43pm 
Hi, the tracks are flying between samedan and bever on my game, althoug it's a great work you have done.
Danny  [author] Jun 27, 2020 @ 11:09am 
Not yet - as noted in the description - the quick drive is still to do :)
lellox94 Jun 27, 2020 @ 11:08am 
Great work! I noticed that it is not possible to start or finish a jouney in Tirano. Is there a fix for this?
Danny  [author] Jun 26, 2020 @ 1:36pm 
It's an odd one - just to the south of where the track was joined it has been fixed now - although according to the editor it was connected - even though not. (I re-laid that bit of track to fix it)

Thank you for spotting it though :) (it's very helpful :) - for some reason lots of people would rather rate things down than mention something - so i'm really grateful for this :) )
timo-s Jun 26, 2020 @ 12:25pm 
Very good work! But I found a fault on the route: If I drive in the section between Bever and Samedan in a scenario, there is an invisible end of the track near "Samedan North". Every time when I try there to get through, my train goes of the rails.
Danny  [author] Jun 26, 2020 @ 6:48am 
Glad you are all enjoying it and thank you :), although Rivet & Thomson have done an amazing job on the original routes :)

Although - fizzbin - this one might be better for that one :) - https://steamcommunity.com/sharedfiles/filedetails/?id=2141297884
Denunn Scherd Jun 26, 2020 @ 6:10am 
Just get the Engadine and now I can have a fantastic free roam!
Thanks a lot!
fizzbin Jun 25, 2020 @ 12:31pm 
Thanks. Great so now drives to St Moritz from Scuol are possible too.