Rust building stability algorithm建筑物稳定性算法

This guide is for somebody really want to know how to control your high building stability,and how it works.
这个指南针对于那些关注自己高层建筑稳定性的玩家。

(English)Stability

Too many people were confused by game building stability system.
So I most probably figured it out.
Not very accurate but very close.

foundation stable =100%,let's say it's 1.
one solid wall stable =1*86%=0.86
one support wall stable =1*70%=0.7
up one level floor stable =(average of four sides stable)*downstairs floor stable

example:
4 solid walls on one foundation
up one level floor stable =(0.86+0.86+0.86+0.86)/4*1=0.86=86%

4 support walls on one foundation
up one level floor stable =(0.7+0.7+0.7+0.7)/4*1=0.7=70%

2 solid and 2 support walls on one foundation
up one level floor stable =(0.86+0.86+0.7+0.7)4*1=0.78=78%

official said you cannot build when stable is below 5%
so
1*0.86^19=5.7%
1*0.86^20=4.9%
the highest floor is 19f ,19*4=76 solid walls on one foundation

Noted:
If you add a pillar in floor center,
the up floor stable = non-pillar floor+10%

On one floor, each solid wall start stability is 70%, plus a wall each multiplied by 1.1 times, the maximum is 86%
On one floor, each support frame wall start stability is 70%, plus a side of each are the same,the maximum is 70%

(中文)稳定性

有太多玩家感觉游戏的建筑稳定性系统很迷
所以我也许猜对了内部算法
不精确但是非常接近

地基稳定性 =100%，我们设成1.
实心墙稳定性 =1x86%=0.86
空心框架墙稳定性 =1x70%=0.7
上一层建筑稳定性 =(四面支撑墙的平均稳定性)x下层地板稳定性

举例:
四面实心墙和一个地基
二楼稳定性 =(0.86+0.86+0.86+0.86)/4x1=0.85=86%

四面空心框架墙和一个地基
二楼稳定性 =(0.7+0.7+0.7+0.7)/4x1=0.7=70%

两面实心和两面框架加一个地基
二楼稳定性 =(0.86+0.86+0.7+0.7)4x1=0.78=78%

官方说稳定性5%以下不能建造
所以
1x0.86^19=5.7%
1x0.86^20=4.9%
最高建筑是19x4=76个实心墙面加一个地基，19楼

注意：
如果你在地板中心建了支撑柱
那么上一层地板稳定性=没支撑柱时的稳定性+10%

在一个地板上，每个实心墙起步稳定性是70%，每加一个墙面乘以1.1倍，最大值是86%
在一个地板上，每个空心框架墙起步稳定性是70%，每加一个面都不变，最大值还是70%

[Anna]

nice

[Herzog von der Black]

Ok the fact that 19th floor isnt the highest you can go without using building tricks. Simple build is 23rd as max and around 29 with building tricks.

[Sakey]

@Herzog von der Black
Yeah right,but I haven't seen what you offer to help and which error you point.
And you just sit there and say it's wrong.

[Herzog von der Black]

sry but this is not correct

[Thuggiestylez]

Nice guide you made

[Dataroach]

you enrage korea

[Geoffman]

lol

[JAMAICA]

asains man

[scr1pe]

thanks that was helpful

[ciggy]

Damn it Chang