LEVEL 6 (LiDAR) Guide & Walktrough

In this guide I will teach you step by step how to solve the riddle behinde the LiDAR level in the game Backrooms: Escape Together.

General Information

In the LiDAR level of the game you have to find your own way through completely dark rooms. The LiDAR program will help you do this.

• Left-click to make pixels appear in a circle within a small radius. You can use the mouse border to increase or decrease the density of the pixels.
  
• Right-click to display an entire scan of the rectangle you are looking at. this allows you to make a larger area appear more quickly. however, you can also proceed with less precision.

Note that there is an Entity roaming around. When you unveil him with your LiDAR you die. So using the left-click scan comes with a risk.

The level can be divided into three sections:

• Phase 1: Press the three buttons
  
• Phase 2: Make your way through the museum
  
• Phase 3: Find the exit in the pitfall maze

Phase 1: Press the 3 buttons & open the red door

You will spawn in an empty, dark room. Look for a red line on the floor.

-
You can follow the red line in two directions. One directions leads to a closed red door. The other way leads to three buttons after the line breaks up into 3 red lines. Follow the lines and press the buttons. You will also hear a beeping sound which gets louder the closer you are to the button.
-
-
After you pressed all 3 buttons go back to the red door. The door should now be openend.
Go trough the door and you will be in the second phase of the level. Be careful of the holes in the ground. If you fall, you die.
-

Phase 2: The Museum

THE LEVEL GOT CHANGED, I INCLUDED ALL THE CHANGES IN THIS GUIDE. CHANGES ONLY APPLY TO THIS PART OF THE LEVEL!


After walking through the red door you will end up in another dark empty room. Now look at the floor and seach for blue lines. As in the phase before you can follow the lines in one of two directions. One leads to a door and the other direction leads to a statue (sculpture) and also new buttons to press!
-
-
Follow the lines individually and listen for the beeping noise once again. The statue will only appear after you pressed the button for that certain statue. The button is very close to the statue but the blue lines only leads to to the statue itself and not to the button. So listen for the noise, find the button and press it. After doing that you can reveal the statue.
-


-

Repeat this process for all 3. blue lines and once again press 3 buttons. Follow the lines back and you will see 3 doors. Each one in a different color and with a different picture of an entity above it.
-
-

On the left side of these doors you will see 3 statues (sculptures). Each one showing a different entity and in a different color.
-
-

Now compare the statues with the doors. Only one statue will fit to a certain door. That means the color and the picture of the entity will be the same. On my example you see a light pink door with a picture of the scratcher above it. When looking on the statues there is also a light pink scratcher statue. This means that this is the correct door. When you look at the other doors and statues, you see that they dont match.

Go trough the right door and enter the third part of this level!

Phase 3: Pitfall Maze

In phase 3 your only job is to not fall into the pitfalls and to find a exit. The exit will be a yellow door. The exit will be on the on a wall at the edge of the room. Listen for a sound that kind of represents a splashing sound or like floating water and waves on the ocean. It will indicate that the door is close.

Keep in mind that the entity will be on that phase as well. Be carefull with the use of the left-click tool since it is easy to uncover the entity and die. You can make your way at the walls and find the exit without chosing a path crossing the middle of the maze.
-
Go through the door and jump down. Congratulations you finished level 6 of Backrooms: Escape Together! The next level will be calm and safe. Be prepared for the one that comes after that tho.
-
Thanks for reading. I hope it helped you! :)

[Baul]

I now includes the level LIDAR changes into the guide, it should now be up to date. Please contact me if you have trouble.

The statues in the Lidar level are now spawing next to the three doors. Only one statue fit to one door. Go trough the correct door. I posted an example inside the guide.

Good luck!

[nitseD]

Died on purgatory, wish I knew...

[LNOyoutuber]

as someone who just lost on Purgatory mode on the museum level because of that damn door puzzle (of all places), thank you so much for this haha

[dipper998]

statues now spawn near the doors and there isnt one that represents you anymore

[Baul]

The level got changed once again. I will update the guide soon.

[UMB.Tew.Tuff]

cant find the statues or the image representing me

[M3M3 Slay | TTV]

bro the statues dont spawn