Подпишитесь, чтобы загрузить
OPV Condor Mk.I

The OPV Condor Mk.I is the eight build in the Coast Guard / rescue response ship series.

At 55.5 meters long, it's the largest of the series and has all the necessary features of an Offshore Patrol Vessel. As with all my other creations, I like to keep my designs simple and practical for better FPS and to minimize lag!




1. Updated heli rotor gear ratio and trim.



1. Three water cannons including main turret.
2. Helicopter.
3. RHIB.
4. Diving compartment.
5. Lower deck cargo with elevator and side opening doors.
6. Auto stabilization.
7. GPS autopilot.
8. Bow collision warning (can be turned off).
9. Flares
10. Radar with variable range.
11. Map-to-screen monitor.
12. Basic FLIR HUD for better visibility in nighttime with heavy fog.
13. Solar panels for battery charging.
14. Heaters & clothing for Arctic missions.



- Length : 55,5m
- Beam : 10.75m
- Top speed : 32 knots
- Power : 8 large diesel engines
- Fuel : 134,720 liters
- Crew : 2 Officer's bunk, 8 crew's bunk (16 beds), 2 medical beds.



1. Turn on engine fuel.
2. Press engine starter.
3. Turn off clutch to move forward.
4. For reverse, set to neutral first or the engine will stop.
5. Engine throttle is clamped with min 0.1 and max 1. Meaning, you can start the engine at 0 throttle and it won't die. To turn off engine, just shut off engine fuel.



1. Fold main and tail rotor.
2. Open hangar door.
3, Walk up to the rope anchors and press e/q to detach.
4. Push helo into hangar by running into skids from behind.
5. Continue pushing till helo locks into place.

*WARNING*

1. When exiting the pilot seat in the chopper while the rotor is still turning, press ctrl-f which makes you duck immediately or else your head might clip through the roof and the rotor will instantly decapitate you.

2. The heli and RHIB have a limited range of 6.5km from the ship. Traveling any further will cause them to disappear. To avoid this you can remove the default heli and spawn in this heli separately instead.






1. Open rear gate.
2. Release connector and RHIB will slide down tracks.
3. Release tracks and you're good to go.
4. For recovery, turn off release connector and tracks button, drive the RHIB into the docking bay and use small winch to secure it in place.



1. GPS Autopilot - Taijin
2. Radar - Sengir_vampire
3. Fuel Time (modified) - Catmandoe1


[www.buymeacoffee.com]

Please do not re-upload my creations under any circumstances. Making modifications to suite your own personal needs is fine but do not upload them to the workshop. It takes days, weeks and sometimes months to create a single ship or aircraft. Blatantly stealing someone else's work and uploading them as your own is NOT cool.