Εγκατάσταση Steam
Σύνδεση
|
Γλώσσα
简体中文 (Απλοποιημένα κινεζικά)
繁體中文 (Παραδοσιακά κινεζικά)
日本語 (Ιαπωνικά)
한국어 (Κορεατικά)
ไทย (Ταϊλανδικά)
Български (Βουλγαρικά)
Čeština (Τσεχικά)
Dansk (Δανικά)
Deutsch (Γερμανικά)
English (Αγγλικά)
Español – España (Ισπανικά – Ισπανία)
Español – Latinoamérica (Ισπανικά – Λατινική Αμερική)
Français (Γαλλικά)
Italiano (Ιταλικά)
Bahasa Indonesia (Ινδονησιακά)
Magyar (Ουγγρικά)
Nederlands (Ολλανδικά)
Norsk (Νορβηγικά)
Polski (Πολωνικά)
Português (Πορτογαλικά – Πορτογαλία)
Português – Brasil (Πορτογαλικά – Βραζιλία)
Română (Ρουμανικά)
Русский (Ρωσικά)
Suomi (Φινλανδικά)
Svenska (Σουηδικά)
Türkçe (Τουρκικά)
Tiếng Việt (Βιετναμικά)
Українська (Ουκρανικά)
Αναφορά προβλήματος μετάφρασης
http://www.microcenter.com/site/stores/
you can get 4690k /w z97 boards for around the same price as 3570k /w z77 board
$500usd is pretty low for a complete gaming machine, do you have any parts to reuse or can you save up more?
what components do you have?
brand/models
http://pcpartpicker.com/p/TmwH7P
Depends what RAM you currently have and how many Gb.
If you have DDR2 RAM then you need new DDR3 RAM.
If you have 4 Gb or less RAM then 2x4 Gb is highly recommended and it's better to buy new 2x4 Gb kit to avoid any compatibility issues then trying to add another 4 Gb.
This 1866 Mhz, CL9, 1.5V kit is nice quality and fits well under CM Hyper 212 EVO cooler.
I have 8gb of Ripjaws ddr3 ram.
Then you dont need new RAM, Ripjaws are fine. Should fit just under the CM Hyper 212 EVO and if there are clearance problems then you can adjust the fan height on this cooler a little to clear the RAM heatspreaders.