soundcard question (asus xonar se 5.1 soundcard)

[mtono]

hi,
i have asus xonar se soundcard and i want to connect two 2.1 sets to my soundcard (creative soundset 2.1 and speedlink 2.1 soundset). they have both 3.5 mm connectors in stereo. the problem is, i cannot succeed in listening to them four speeakers i conncted. only one i can plays sound. how does this work? google doesnt help. i dont get it. i need to discuss the problem. all is well connected. is it a bug or a feature?

[PopinFRESH]

Which specific models are your speaker systems?

[mtono]

creative A250
speedlink gravity 2.1

[PopinFRESH]

Reference the manual for your Xonar SE

https://dlcdnets.asus.com/pub/ASUS/Audio_Card/Xonar_SE/Q19789_Xonar_SE_QSG_V3_WEB.pdf?model=Xonar%20SE

Connect the "front L&R" output (jack number 2) to your Creative A250 stereo input
Connect the "Side surround" output (jack number 3) to your Speedlink Gravity 2.1 stereo input

It's not a great solution because you're not using an actual surround speaker set which will be separating out Front L/R, Side Surround L/R, and Center/Sub channels. But it should work if its correctly connected. I'm guessing you have them connected to jack 1 and 2 which jack 1 is the microphone / line in jack (not an output).

EDIT: Also make sure you've installed the latest driver for the Xonar SE, and ensure your audio output settings in Windows 11 are configured for surround output.

[mtono]

i will check...give me some minutes

[mtono]

hell yeah! i connected both speaker sets and this is how i succeeded:
i switched the speaker setup in the driver to 5.1 speakers and installed 5.1 upmix function in foobar2000 audioplayer...it works.
thx for your help!
cu.

[xSOSxHawkens]

You should be able to select quadrophonic or 4 chanel. Choosing 5.1 will have missing audio due to no center speaker connected. Quad will work as intended. It was the precursor to 5.1

[mtono]

yes... i did this...thank you very much.

:-D

[_I_]

yea, most 2.1 are really stereo with stereo mix lfe for sub
5.1 uses 1 headphone jack for center/sub, if its not connected those will be missing

[mtono]

i connected one 2.1 set to the frontspeaker jack and the other to the rear speaker set. i have output and that is what i wanted: sound on both speaker sets. i just bought the asus xonar se and wanted to try this.
thank you to everyone.
have a nice day.