Instalar o Steam
Iniciar sessão
|
Idioma
简体中文 (Chinês Simplificado)
繁體中文 (Chinês Tradicional)
日本語 (Japonês)
한국어 (Coreano)
ไทย (Tailandês)
Български (Búlgaro)
Čeština (Checo)
Dansk (Dinamarquês)
Deutsch (Alemão)
English (Inglês)
Español-España (Espanhol de Espanha)
Español-Latinoamérica (Espanhol da América Latina)
Ελληνικά (Grego)
Français (Francês)
Italiano (Italiano)
Bahasa Indonesia (Indonésio)
Magyar (Húngaro)
Nederlands (Holandês)
Norsk (Norueguês)
Polski (Polaco)
Português (Brasil)
Română (Romeno)
Русский (Russo)
Suomi (Finlandês)
Svenska (Sueco)
Türkçe (Turco)
Tiếng Việt (Vietnamita)
Українська (Ucraniano)
Relatar problema de tradução
A 500w psu is more than enough
I tried it on a PCpartpicker my Build was recommended at 366 Watts PSU Usage with RTX 3060
You should be fine with a 500 watt PSU, but if it were me, I would go with at least what's suggested by the manufacturer, being 550.
but as always, brand/model over labeled wattage
too many fake or overrated psus out there
RTX 3060 itself needs around 200 watts. So, 500w PSU is plenty for your system.
Overall I would say do not go with 500Watts because there is hardly a good ATX PSU below approx 600 watts. Most PSU below that may not provide good efficiency or provide enough connectors. If the PSU doesn't have 2x 8pin EPS + 2x 8pin (6+2pin) GPU connectors, I would avoid it.
my CPU is i5 10400F
Thank you for the info i probably play safe it and buy a higher PSU Watts. after all my PSU is 4 years old now.
Going to get that if they put RTX 5060 Tie or RTX 7060 TI in reasonable price in the future.
Probably the only way 850 watts won't be enough is if you go with a Ryzen 9 or Intel i9 coupled with a 3090/Ti or 4090/Ti