安裝 Steam
登入
|
語言
簡體中文
日本語(日文)
한국어(韓文)
ไทย(泰文)
Български(保加利亞文)
Čeština(捷克文)
Dansk(丹麥文)
Deutsch(德文)
English(英文)
Español - España(西班牙文 - 西班牙)
Español - Latinoamérica(西班牙文 - 拉丁美洲)
Ελληνικά(希臘文)
Français(法文)
Italiano(義大利文)
Bahasa Indonesia(印尼語)
Magyar(匈牙利文)
Nederlands(荷蘭文)
Norsk(挪威文)
Polski(波蘭文)
Português(葡萄牙文 - 葡萄牙)
Português - Brasil(葡萄牙文 - 巴西)
Română(羅馬尼亞文)
Русский(俄文)
Suomi(芬蘭文)
Svenska(瑞典文)
Türkçe(土耳其文)
tiếng Việt(越南文)
Українська(烏克蘭文)
回報翻譯問題
cores are the core temps, pkg is the overall chip temp
the mobo should have a tmpin0 that is the sensor under the cpu socket
Here's a screenshot I found on Google. http://cdn.canadiancontent.net/t/screenshot/750/open-hardware-monitor.jpg
I've been watching the bracket that says "Intel Core 2 Duo," and the subsequent temperatures for each core. So what I /should/ be watching is CPU temp under the motherboard bracket? Like where it says Gigabyte in the screenshot?
if the cores are more than 5c apart from eachother, redo the thermal paste
I'm looking at the core temps and they seem to run around 2-5 degrees apart, but nothing more. At the same time, the core temps fluctuate non-stop. Am I in the clear?
what cpu is it, and what are the max load temps?
I'm using an i7 4770k. TCase is 72C, if that's what you're asking.
(be sure to get the firmware updates for the pump)
your max load temp
the max on the cpu is around 90-100c before it will thermal throttle
Anyways, it's great to hear that I have nothing to be cautious of. I appreciate all your help these past months on the forum, _I_. Thanks again.