Help with Cooler Master RGB lighting setup :: Hardware and Operating Systems

Todas as discussões > Fóruns Steam > Hardware and Operating Systems > Detalhes do tópico

NotTonightChamp 25/abr./2020 às 22:32

Help with Cooler Master RGB lighting setup

Can anyone give me some help in setting up my Cooler Master Universal LED Strips. I have a RGB controller, but when i plug the LEDs in it doesn't light up.

< >

Exibindo comentários 1–9 de 9

Spec_Ops_Ape 25/abr./2020 às 23:21

Link to the strips and controller you are using?

NotTonightChamp 25/abr./2020 às 23:38

Escrito originalmente por Spec_Ops_Ape:
Link to the strips and controller you are using?

This is the controller box http://www.xigmatek.com/product_detail.php?item=222

And this is the strips https://www.coolermaster.com/au/en-au/catalog/cases/accessories/universal-led-strip-rgb/

Thanks mate

Spec_Ops_Ape 26/abr./2020 às 0:19

The Cooler Master LED strips aren't supported by the Xigmatek controller you are using. The controller is a 3 pin 5v ARGB where-as the LED strips are a standard 12v RGB strip. The strips will not work with the controller.
Your motherboard on the other hand, may be able to depending on model.

Última edição por Spec_Ops_Ape; 26/abr./2020 às 0:19

NotTonightChamp 26/abr./2020 às 0:25

Ah okay, so there isn't any way of getting some sort of adapter to make it work? I have a MSI motherboard. If i were to plug it into the motherboard where would it go. I have other RGB fans/lights plugged into my controller so i thought it being "universal" it would work.

Spec_Ops_Ape 26/abr./2020 às 2:25

If your motherboard has a 12v RGB header you could plug them into there but I think some boards are not able to do both 5v and 12v LED at the same time (I think).
There is no adaptor that would work. RGB and ARGB LED strips are different in the way they communicate with the LEDs.