所有讨论 > Steam 论坛 > Hardware and Operating Systems > 主题详情
Spxczz 2017 年 12 月 4 日 下午 3:12
Need help ASAP
Just put in my new mobo Z270E did the thermals paste on have corsair liquid cooler, now the problem, when I go into the BIOS the temps start off with 40c then they gradually go up and got to 90c can someone give me a solution for this I'm kinda stuck thnx
< >
正在显示第 1 - 15 条，共 51 条留言
Omega 2017 年 12 月 4 日 下午 3:15 
- Make sure the cooler is making proper contact with the CPU heatspreader.
- Make sure you have the AIO connected to power (usually via SATA power) and that the pump is running.
最后由 Omega 编辑于; 2017 年 12 月 4 日 下午 3:18
#1
Spxczz 2017 年 12 月 4 日 下午 3:20 
引用自 Omega：
- Make sure the cooler is making proper contact with the CPU heatspreader.
- Make sure you have the AIO connected to power usually via SATA and that the pump is running.
Its making contact because I checked and it squashes the thermal paste around so it's connected, the light turns on the cooler and the fans are working from the radiator
#2
Omega 2017 年 12 月 4 日 下午 3:25 
引用自 Raulikkss：
引用自 Omega：
- Make sure the cooler is making proper contact with the CPU heatspreader.
- Make sure you have the AIO connected to power usually via SATA and that the pump is running.
Its making contact because I checked and it squashes the thermal paste around so it's connected, the light turns on the cooler and the fans are working from the radiator
The pump is more important than the fans. Make sure it is running.

What AIO do you have exactly?

Disconnect the PC from power and only have the pump connected to the PSU. Then short circuit the green wire with any of the black wires on the 24pin using a paper clip or something else made of metal. Do all this while the PSU is disconnected from power of course. Then connect the PSU to power and it will turn on. Listen if you can hear the pump running or if it is making any strange noises.
#3
Spxczz 2017 年 12 月 4 日 下午 3:39 
引用自 Omega：
引用自 Raulikkss：
Its making contact because I checked and it squashes the thermal paste around so it's connected, the light turns on the cooler and the fans are working from the radiator
The pump is more important than the fans. Make sure it is running.

What AIO do you have exactly?

Disconnect the PC from power and only have the pump connected to the PSU. Then short circuit the green wire with any of the black wires on the 24pin using a paper clip or something else made of metal. Do all this while the PSU is disconnected from power of course. Then connect the PSU to power and it will turn on. Listen if you can hear the pump running or if it is making any strange noises.
I've noticed I had didn't have the AIO pump wire in the correct socket and the pump that has the USB 2.0 that was plugged in the auto pump socket but didn't turn on pc yet gonna see if that was the problem

I've the H100i v2
最后由 rotNdude 编辑于; 2017 年 12 月 5 日 上午 10:51
#4
Andrius227 2017 年 12 月 4 日 下午 4:02 
Yeah it sounds like the pump not working, either not plugged in or dead. Although i doubt it would even boot if the pump was not plugged in, but im not sure.
最后由 Andrius227 编辑于; 2017 年 12 月 4 日 下午 4:04
#5
Spxczz 2017 年 12 月 4 日 下午 4:10 
引用自 Andrius227：
Yeah it sounds like the pump not working, either not plugged in or dead. Although i doubt it would even boot if the pump was not plugged in, but im not sure.
When I boot up it shows cpu fan error detected so I can't boot in windows, it was working yesterday as soon as I replace mobo it says there's an error I just don't understand
#6
Omega 2017 年 12 月 4 日 下午 4:12 
引用自 Raulikkss：
引用自 Andrius227：
Yeah it sounds like the pump not working, either not plugged in or dead. Although i doubt it would even boot if the pump was not plugged in, but im not sure.
When I boot up it shows cpu fan error detected so I can't boot in windows, it was working yesterday as soon as I replace mobo it says there's an error I just don't understand
Connect the fans of the radiator to the CPU_FAN header.
#7
Spxczz 2017 年 12 月 4 日 下午 4:20 
引用自 Omega：
引用自 Raulikkss：
When I boot up it shows cpu fan error detected so I can't boot in windows, it was working yesterday as soon as I replace mobo it says there's an error I just don't understand
Connect the fans of the radiator to the CPU_FAN header.
Did this and still got the error
And in bios the cpu temp keeps climbing up
最后由 Spxczz 编辑于; 2017 年 12 月 4 日 下午 4:20
#8
Omega 2017 年 12 月 4 日 下午 4:20 
引用自 Raulikkss：
引用自 Omega：
Connect the fans of the radiator to the CPU_FAN header.
Did this and still got the error
What is the exact error?

If the pump has a fan header connect it to a dedicated pump header or CPU_OPT.

The pump may be dead.
最后由 Omega 编辑于; 2017 年 12 月 4 日 下午 4:21
#9
Spxczz 2017 年 12 月 4 日 下午 4:30 
引用自 Omega：
引用自 Raulikkss：
Did this and still got the error
What is the exact error?

If the pump has a fan header connect it to a dedicated pump header or CPU_OPT.

The pump may be dead.
When I turn on pc the exact error is
Cpu fan speed error detected
Ensure that the cpu fan is properly installed on the cpu fan header or ajust/disable the fan speed low limit option the UEFI BIOS

It's connected to the cpu opt

Everything is connected where it should be, but how could of it die of that is the case
最后由 rotNdude 编辑于; 2017 年 12 月 5 日 上午 10:51
#10
Omega 2017 年 12 月 4 日 下午 4:36 
New motherboard right? Could also be the mobo then. BIOS reset it.
#11
Spxczz 2017 年 12 月 4 日 下午 4:39 
引用自 Omega：
New motherboard right? Could also be the mobo then. BIOS reset it.
Yes I jus got the new mobo everything shows up on bios the only problem is the error for that, what u mean reset it
#12
Omega 2017 年 12 月 4 日 下午 4:41 
引用自 Raulikkss：
引用自 Omega：
New motherboard right? Could also be the mobo then. BIOS reset it.
Yes I jus got the new mobo everything shows up on bios the only problem is the error for that, what u mean reset it
Disconnect the machine from power and remove the CMOS battery for 2 minutes.

CMOS battery: https://www.lostwindowspassword.com/images/article/windows-tips/cmos.jpg
#13
Spxczz 2017 年 12 月 4 日 下午 4:45 
引用自 Omega：
引用自 Raulikkss：
Yes I jus got the new mobo everything shows up on bios the only problem is the error for that, what u mean reset it
Disconnect the machine from power and remove the CMOS battery for 2 minutes.

CMOS battery: https://www.lostwindowspassword.com/images/article/windows-tips/cmos.jpg
Does this work
#14
Omega 2017 年 12 月 4 日 下午 4:48 
引用自 Raulikkss：
引用自 Omega：
Disconnect the machine from power and remove the CMOS battery for 2 minutes.

CMOS battery: https://www.lostwindowspassword.com/images/article/windows-tips/cmos.jpg
Does this work
It might.
#15
< >
正在显示第 1 - 15 条，共 51 条留言
每页显示数： 1530 50

所有讨论 > Steam 论坛 > Hardware and Operating Systems > 主题详情
发帖日期： 2017 年 12 月 4 日 下午 3:12
回复数： 50
发起新讨论

讨论规则及指引