HELP! My noctua nh d-15 can't be mounted

[Crisp]

 https://imgur.com/gallery/PFV88

I went to their site and my mb compatibility with the cpu cooler was ok.Btw I have the asus strix z270f

[Omega]

Follow the instructions in the manual. The cooler will fit.

[Crisp]

I tried,but the I can't even screw the screw

[Crisp]

when I use the screwdriver and when I screw them they don't even do anything.They don't even touch each other.

[Omega]

https://www.youtube.com/watch?v=BpdAiyFotDI

[Omega]

Escrito originalmente por L1L_CrYp:

I tried,but the I can't even screw the screw

Escrito originalmente por L1L_CrYp:

when I use the screwdriver and when I screw them they don't even do anything.They don't even touch each other.

Do not fully screw down one screw when securing the cooler. Thighten them all a little bit in a star patern.

[Crisp]

That's the video I was watching some minutes ago to install it.Should I post a video of the problem to you?

[Omega]

Escrito originalmente por L1L_CrYp:

That's the video I was watching some minutes ago to install it.Should I post a video of the problem to you?

Sure.

[Crisp]

Ok gimme a minute

[Crisp]

https://www.youtube.com/watch?v=rYY8RCl6dAo sorry for the bad quality I just uploaded it

[HypersleepyNaputunia]

take the brackets off and look in the box for the otehr brackets. try to screw them off the processor, also some brackets have the u inwards sometimes

[Crisp]

Escrito originalmente por Gimp:

I had no problem installing mine, even with high profile ram. In fact, they designed it well. Are you sure you're using the correct brackets?

Are there 2 different brackets?

[UNLIMITED POWA]

Are you sure the mounting spikes arent supposed to be curved in instead of out? I havent touched mine in ages and think they were curved in for me but i might be wrong. I could do with reaplying paste so i'll probably get another look at it soon enough. I found the D15 to be one of the best and easiest mounters i've seen yet. Thats why i'm thinking you might have the mount spikes in the wrong position.

[Crisp]

https://imgur.com/gallery/rHJ1Z

[Omega]

Its not that hard.. it will fit just follow the instructions in the manual. You are clearly doing something wrong.

[Crisp]

I did...


Oh and btw I fixed it just the plate wasnt installed correctly and it didn't stand well so I fixed it now thnx for the help guys