How to connect the psvr?

[FreddieForever#1]

How do you connect the psvr to pc? a setup guide would be good.

[jaquedeth]

There are only 2 cables from the PSVR break-out box that plug in to your PC. The first is the USB cable and the second is an HDMI cable that goes from the slot labeled "HDMI PS4" on the break-out box to the HDMI out on your PC. and that is it. Your PSVR headset hooks to the PS4 break-out box the same as it would if you were using it on a PS4.

[FreddieForever#1]

Originally posted by jaquedeth:

There are only 2 cables from the PSVR break-out box that plug in to your PC. The first is the USB cable and the second is an HDMI cable that goes from the slot labeled "HDMI PS4" on the break-out box to the HDMI out on your PC. and that is it. Your PSVR headset hooks to the PS4 break-out box the same as it would if you were using it on a PS4.

Ok thanks, how much is the frequency and how do you play 6dof games that requires rift/vive controllers? since the psvr camera isnt connected how can it track 6dof?

[iVRy]

There is a connection diagram on the Steam page for the PSVR DLC. You'll need to use PSMoveService or Driver4VR to use the PSMove controllers.

[FreddieForever#1]

Originally posted by iVRy:

There is a connection diagram on the Steam page for the PSVR DLC. You'll need to use PSMoveService or Driver4VR to use the PSMove controllers.

Thats a driver? if so i have to connect the ps4 camera? Also is this like the other psvr/pc program where you have to configure displays etc? sorry im new to this.

[iVRy]

You can search for those terms on your search engine to get more information.

This is not like any other PSVR/PC program. You do not have to install/configure anything. You plug in the PSVR, install the iVRy Driver for SteamVR and press Launch. That's it.

[FreddieForever#1]

Originally posted by iVRy:

You can search for those terms on your search engine to get more information.

This is not like any other PSVR/PC program. You do not have to install/configure anything. You plug in the PSVR, install the iVRy Driver for SteamVR and press Launch. That's it.

Alright thanks man!

[FreddieForever#1]

Just wondering, what is the refresh rate when playing steamvr games on psvr? i heard it can damage the headset if the refresh rate is different that what the headset is designed for, is this true?

[iVRy]

You can choose it from the iVRy settings. It defaults to 90Hz, but you can run it at 60Hz or 120Hz. Those are the only refresh rates iVRy will set it to, and they are all supported by the PSVR. It is designed for those refresh rates, which are also used by the PS4 (for PSVR).

[FreddieForever#1]

Ok, i just connected it and it seems to detect the headset and it says its ready but i get no picture, i can see that it tracks the headset on the tv screen but the psvr is black, no picture. A sign also comes up that says "we dont recommed the extended mode, please switch" and i did it but there is still no picture in the headset.

[FreddieForever#1]

Originally posted by jaquedeth:

There are only 2 cables from the PSVR break-out box that plug in to your PC. The first is the USB cable and the second is an HDMI cable that goes from the slot labeled "HDMI PS4" on the break-out box to the HDMI out on your PC. and that is it. Your PSVR headset hooks to the PS4 break-out box the same as it would if you were using it on a PS4.

I connected it like you said and it detects the headset but i dont get any picture in the headset, its black. It says that its in extended mode and that its not recommended so i should switch back to direct mode, i did that but nothing happenes and it says that its in extended mode again.

[DeepspaceDaz]

Same problem no picture in hmd

[13eBLEStealth]

Originally posted by BTR:

Originally posted by jaquedeth:

There are only 2 cables from the PSVR break-out box that plug in to your PC. The first is the USB cable and the second is an HDMI cable that goes from the slot labeled "HDMI PS4" on the break-out box to the HDMI out on your PC. and that is it. Your PSVR headset hooks to the PS4 break-out box the same as it would if you were using it on a PS4.

I connected it like you said and it detects the headset but i dont get any picture in the headset, its black. It says that its in extended mode and that its not recommended so i should switch back to direct mode, i did that but nothing happenes and it says that its in extended mode again.

hey man well what i did was uninstall ivry connect everything to the break out box then i connected the headset last made sure the light on the box was white if not turn on your headset restart your pc check in display settings make sure you see 2 monitors check the box again for the white light dont turn on the headset install ivry hit launch on ivry not steamvr and dont move your headset once you see steam vr say ready pick up headset and see if you have picture if you do run steamvr setup and all done...Hope it helps

[darekspy]

Originally posted by iVRy:

You can choose it from the iVRy settings. It defaults to 90Hz, but you can run it at 60Hz or 120Hz. Those are the only refresh rates iVRy will set it to, and they are all supported by the PSVR. It is designed for those refresh rates, which are also used by the PS4 (for PSVR).

Hi
I only installed ivry psvr lite and its not working :/

[BiGoRnA_AU]

The same here, ive got the ivry psvr lite and it does nothing.
It just show like a normal screen in my psvr. I can switch the screens pressing windows button+shift+right arrow but it is like i said, its not like real VR version only big screen..

[iVRy]

If you start messing around with the Windows monitor layout (like trying to force the iVRy output onto a particular screen), it will definitely not work. If you want support, you need to provide *all* of the information in this post:

https://steamcommunity.com/app/992490/discussions/0/3247562523076890727/