a4tech bloody v8 sometimes "auto-spinning" / Spinning

[stmpunk]

When I'm too frenetically turning around, specially in DMs, my mouse sometimes enters in a spinning motion whereas it also moves 90º either up or down, and I end up aiming at the sky or the ground...

I've tried blowing the optical hole a few times, but doing so doesn't seem to do anything as these glitches seem intermitent...

I still have no clue as to what is causing this so I'm here to ask if anybody can help. If that happens during an official match in the League I play I'll be likely screwed... =/

I'm currently using a4tech bloody v8 with Playpad mousepad. I do not use any macros or scripts on the mouse's software.
DPI's currently set to 400
Sensitivity is 1.7

Ty for your time.

[m4ndox]

you deserve that for using a mouse that can automatically control recoil. you dont have to be good at all or memorize anything

HES ON THE GEAR BOIS

HOW PROS CHEAT ON LAN OMFG!!1!!

[m4ndox]

Ursprünglich geschrieben von Adelele:

Ursprünglich geschrieben von Dan M Fanboy #1:

you deserve that for using a mouse that can automatically control recoil. you dont have to be good at all or memorize anything

HES ON THE GEAR BOIS

HOW PROS CHEAT ON LAN OMFG!!1!!

https://www.youtube.com/watch?v=rDbrkPXgG1c

LMAO

inb4 dan m vid :^)

edit: he probably showed stuff like that in a vid, but that guy is just a meme so who watches his vids anyway ( ͡° ͜ʖ ͡°)

[m4ndox]

Ursprünglich geschrieben von Adelele:

Ursprünglich geschrieben von Dan M Fanboy #1:

inb4 dan m vid :^)

edit: he probably showed stuff like that in a vid, but that guy is just a meme so who watches his vids anyway ( ͡° ͜ʖ ͡°)

I saw few hours ago some online match for some qualify dont know what one... guy is shooting with the mac10 like with a lasergun.

the thing is that some people actually trained stuff like that for years and then a guy like op comes and destroys everyone just because of an actually bad mouse with some macro that can pretty much count as cheating.

to everyone using that mouse: i really hop eyou get ow banned one day. i bet you guys are also complaining about cheaters ^^

[Lad Mad]

Ursprünglich geschrieben von Dan M Fanboy #1:

Ursprünglich geschrieben von Adelele:

I saw few hours ago some online match for some qualify dont know what one... guy is shooting with the mac10 like with a lasergun.

the thing is that some people actually trained stuff like that for years and then a guy like op comes and destroys everyone just because of an actually bad mouse with some macro that can pretty much count as cheating.

to everyone using that mouse: i really hop eyou get ow banned one day. i bet you guys are also complaining about cheaters ^^

so wheres your evidence that hes using these scripts?

[Shady ♚]

The a4tech Bloody v8 doesn't have a good sensor. There's no fix, get a mouse with a better sensor, then there won't be any spin outs.

[Lad Mad]

Ursprünglich geschrieben von Shady ♚:

The a4tech Bloody v8 doesn't have a good sensor. There's no fix, get a mouse with a better sensor, then there won't be any spin outs.

i have a zowie ec-2a and i think it has a good sensor but i still have those spin outs like op describes them

[Shady ♚]

Ursprünglich geschrieben von Dr.:

Ursprünglich geschrieben von Shady ♚:

The a4tech Bloody v8 doesn't have a good sensor. There's no fix, get a mouse with a better sensor, then there won't be any spin outs.

i have a zowie ec-2a and i think it has a good sensor but i still have those spin outs like op describes them

The Zowie ec-2a isn't a new mouse anymore. It has the 3310 Optical sensor, that can be made to spin out at certain situations.

[Lad Mad]

Ursprünglich geschrieben von Shady ♚:

Ursprünglich geschrieben von Dr.:

i have a zowie ec-2a and i think it has a good sensor but i still have those spin outs like op describes them

The Zowie ec-2a isn't a new mouse anymore. It has the 3310 Optical sensor, that can be made to spin out at certain situations.

i based my assumption on the review of rocketjumpninja

[Shady ♚]

Ursprünglich geschrieben von Dr.:

Ursprünglich geschrieben von Shady ♚:

The Zowie ec-2a isn't a new mouse anymore. It has the 3310 Optical sensor, that can be made to spin out at certain situations.

i based my assumption on the review of rocketjumpninja

Same lol, but he did mention it has a 3310 sensor and can be spun out at certain situations

[stmpunk]

Ursprünglich geschrieben von LUKKE:

tenho o meso ratoo e tenho esse problemaa , gostava de saber se ja resolveu?

já resolvi faz mto tempo. É só ativar o "Raw Input" e desligar o accelaration em ambas a configuração do mouse e no CSGO.

E não use os scripts ou macros. É melhor jogar sem nada, de verdade, além de que usar essas coisas é borderline-cheating.

[stmpunk]

Ursprünglich geschrieben von Adelele:

a4tech bloody v8 = Sensor: PixArt PAW3305DK

68 inches/sec @ A4 paper
3600 frames/sec


Steelseries Rival 300
Frame rate up to
6,500fps
High speed motion detection
of 200 IPS


Thats why.

Nope, it was about config.

Also I don't use any macro, tried it out at some point, but it's just bad, and pointless, it takes away control which ends up lowering your own effectiveness in-game, I've played some Brazilian Leagues in the past, and I can assure you that macroed recoil is much worse than using nothing if you have the same skill level as an amoeba.

This sensor thing is pure marketing stunt, there's no actual difference noticeable, I've used many mouses, from MS 1.0, to Razer DeathAdder, Copperhead, and so on. The main difference is on ergonomics, if you have a mouse that fits your hand with some half-ass descent sensor you are good to go. So you are feeding bs and not telling truths nor helping with what you are saying.

One thing I can say for sure is that Razer products worn-out way too fast, everything I've owned from razer has broken and gave me countless issues, imo it's a bad brand...

From my own experience this mouse is very much like Razer DA, weight, precision, etc. But it has better ergonomics, which feel more organic, at least for me...

Anyway, enough with this chatter, the problem was software not hardware, so there's that.
Peace

PS: For anyone having the same issue, just activate Raw Input in CSGO and disable any kind of mouse-acceleration you can find (in-game, windows, a4tech config software, etc)

PS2: Also use USB 3.0 ports for better input.

[m4ndox]

Ursprünglich geschrieben von Psychoprata:

Ursprünglich geschrieben von Adelele:

a4tech bloody v8 = Sensor: PixArt PAW3305DK

68 inches/sec @ A4 paper
3600 frames/sec


Steelseries Rival 300
Frame rate up to
6,500fps
High speed motion detection
of 200 IPS


Thats why.

Nope, it was about config.

Also I don't use any macro, tried it out at some point, but it's just bad, and pointless, it takes away control which ends up lowering your own effectiveness in-game, I've played some Brazilian Leagues in the past, and I can assure you that macroed recoil is much worse than using nothing if you have the same skill level as an amoeba.

This sensor thing is pure marketing stunt, there's no actual difference noticeable, I've used many mouses, from MS 1.0, to Razer DeathAdder, Copperhead, and so on. The main difference is on ergonomics, if you have a mouse that fits your hand with some half-ass descent sensor you are good to go. So you are feeding bs and not telling truths nor helping with what you are saying.

One thing I can say for sure is that Razer products worn-out way too fast, everything I've owned from razer has broken and gave me countless issues, imo it's a bad brand...

From my own experience this mouse is very much like Razer DA, weight, precision, etc. But it has better ergonomics, which feel more organic, at least for me...

Anyway, enough with this chatter, the problem was software not hardware, so there's that.
Peace

PS: For anyone having the same issue, just activate Raw Input in CSGO and disable any kind of mouse-acceleration you can find (in-game, windows, a4tech config software, etc)

PS2: Also use USB 3.0 ports for better input.

There is a huge difference in sensor. With my old mouse i actually felt little jumps and it had a better sensor than yours. My g402 doesnt have those jumps

[Lad Mad]

Ursprünglich geschrieben von Psychoprata:

a4tech bloody v8 = Sensor: PixArt PAW3305DK

1. This sensor thing is pure marketing stunt, there's no actual difference noticeable, I've used many mouses, from MS 1.0, to Razer DeathAdder, Copperhead, and so on. The main difference is on ergonomics, if you have a mouse that fits your hand with some half-ass descent sensor you are good to go. So you are feeding bs and not telling truths nor helping with what you are saying.

2. PS: For anyone having the same issue, just activate Raw Input in CSGO and disable any kind of mouse-acceleration you can find (in-game, windows, a4tech config software, etc)

3. PS2: Also use USB 3.0 ports for better input.

1. its NOT marketing. i made several mice spin out. i have small problems with my actual ec-2a but not as bad as with my razer taipan or any cheap mouse.

2. if your sensor is ♥♥♥♥ it doesnt fix it if you disable acceleration or anything

3. usb 3 is ♥♥♥♥♥♥♥♥. you have jsut a small bitrate. usb 3 is only helpful with high bitrates which you dont have on your (mostly) usb "2"!!! mice

[Duuckly]

Ursprünglich geschrieben von Psychoprata:

Ursprünglich geschrieben von Adelele:

a4tech bloody v8 = Sensor: PixArt PAW3305DK

68 inches/sec @ A4 paper
3600 frames/sec


Steelseries Rival 300
Frame rate up to
6,500fps
High speed motion detection
of 200 IPS


Thats why.

Nope, it was about config.

Also I don't use any macro, tried it out at some point, but it's just bad, and pointless, it takes away control which ends up lowering your own effectiveness in-game, I've played some Brazilian Leagues in the past, and I can assure you that macroed recoil is much worse than using nothing if you have the same skill level as an amoeba.

This sensor thing is pure marketing stunt, there's no actual difference noticeable, I've used many mouses, from MS 1.0, to Razer DeathAdder, Copperhead, and so on. The main difference is on ergonomics, if you have a mouse that fits your hand with some half-ass descent sensor you are good to go. So you are feeding bs and not telling truths nor helping with what you are saying.

One thing I can say for sure is that Razer products worn-out way too fast, everything I've owned from razer has broken and gave me countless issues, imo it's a bad brand...

From my own experience this mouse is very much like Razer DA, weight, precision, etc. But it has better ergonomics, which feel more organic, at least for me...

Anyway, enough with this chatter, the problem was software not hardware, so there's that.
Peace

PS: For anyone having the same issue, just activate Raw Input in CSGO and disable any kind of mouse-acceleration you can find (in-game, windows, a4tech config software, etc)

PS2: Also use USB 3.0 ports for better input.

Hi! I'm using V7 have the same issue as you. How to find any kind of mouse-acceleration? I have RAW inabled in-game also mouse accel off in-game. But where it is in windows? And in a4tech config?

Did you fix that spinning problem? Couse i have a lot of struggle with it, using 400dpi/2.05sens in-game/1000hz/1msResponse.

[Lad Mad]

Ursprünglich geschrieben von Frame_ON:

Ursprünglich geschrieben von Psychoprata:

Nope, it was about config.

Also I don't use any macro, tried it out at some point, but it's just bad, and pointless, it takes away control which ends up lowering your own effectiveness in-game, I've played some Brazilian Leagues in the past, and I can assure you that macroed recoil is much worse than using nothing if you have the same skill level as an amoeba.

This sensor thing is pure marketing stunt, there's no actual difference noticeable, I've used many mouses, from MS 1.0, to Razer DeathAdder, Copperhead, and so on. The main difference is on ergonomics, if you have a mouse that fits your hand with some half-ass descent sensor you are good to go. So you are feeding bs and not telling truths nor helping with what you are saying.

One thing I can say for sure is that Razer products worn-out way too fast, everything I've owned from razer has broken and gave me countless issues, imo it's a bad brand...

From my own experience this mouse is very much like Razer DA, weight, precision, etc. But it has better ergonomics, which feel more organic, at least for me...

Anyway, enough with this chatter, the problem was software not hardware, so there's that.
Peace

PS: For anyone having the same issue, just activate Raw Input in CSGO and disable any kind of mouse-acceleration you can find (in-game, windows, a4tech config software, etc)

PS2: Also use USB 3.0 ports for better input.

Hi! I'm using V7 have the same issue as you. How to find any kind of mouse-acceleration? I have RAW inabled in-game also mouse accel off in-game. But where it is in windows? And in a4tech config?

Did you fix that spinning problem? Couse i have a lot of struggle with it, using 400dpi/2.05sens in-game/1000hz/1msResponse.

if using raw input it doesnt matter in windows