Is there a trick for curved barriers to follow a curved wall piece?

[Lightsite]

I build the outline of a new habitat with a low level "barrier" using quite narrow wall pieces including curved ones. I now want the one way mirror glass barrier to stick out of my wall to raise the height of my barrier by also giving my guest a good view.

Because I want to place the little red pandas inside the habitat which are shy it has to be the mirror glas fence. I pereferably would use curved mirror glass wall pieces but there aren't any in the game currently.

I tried to puzzle my way around the outline set by the walls but I can't really figure out the best way to place down the fence inside the curved wall. But the glass keeps sticking out on either side.

My current solution is using two straight 2m fence pieces at the ends of each curved wall piece and connecting them using the curved option of the fence. Then I push the fence postes around until it looks somewhat decent but I am not really satisfied with my result.

What also seems to work somehow is using a 6m fence and then connecting the ends of the curved wall then to press "y" and andjust the curviness. After that I move the fence post an add another fence post in the middle of the fence piece to move further outwards.

Has anyone of you experience in doing this and has suggestins for wall length ect. which are more practicable?

Thanks for your help in advance :)

[grampers62]

Sounds like it could work out to be a good setup but it does get tricky. You are on the right track but remember to keep the barrier as simple as possible. Placing the straight walls and then connecting them with curved sections is the better option as the meters snap doesn't work out right with those quarter circle walls.