Can somebody help please

[ironside52]

I have recently upgraded my pedals to the Thrustmaster TLCM and for some reason the throttle seems to be like an on/off switch. I'm at a complete loss and it is making the game unplayable. To be fair the throttle response wasn't the best with my original TCPH Pro pedals. I'm thinking that I'm missing something in the calibration as the problem only occurs in this sim. Can anybody helps please. Thanks in anticipation

[lich0]

I don't own these, but I’ve read they can be plugged into the wheel base or directly to the PC. Have you tried both options?

When the pedals are connected directly to the PC, are they detected as a separate controller?
Since these came out recently, they might not be mapped properly in the game files. In the install directory there’s /Devices/device-defines.xml - you might have to do this manually.

You also might want to check out the technical support section on the official forums. There’s a chance you’ll get support from CM there.

[Simon said EAT DUST PLAYER_1 !]

the game enforces it's own dead-zones and linearity. You can reset/adjust them when looking into the in-game options for your pedals. If you have them connected to your wheel, then the pedal-axxis are to be found and manipulated by chosing the wheel inside the game's control-submenu.

Maybe you still need to update the driver/firamware package, though. Have a look into that.

[ironside52]

Originally posted by lich0:

I don't own these, but I’ve read they can be plugged into the wheel base or directly to the PC. Have you tried both options?

When the pedals are connected directly to the PC, are they detected as a separate controller?
Since these came out recently, they might not be mapped properly in the game files. In the install directory there’s /Devices/device-defines.xml - you might have to do this manually.

You also might want to check out the technical support section on the official forums. There’s a chance you’ll get support from CM there.

You are correct in saying they are not included in the install directory. Do you know how I can include it as this is alien territory to me. Thanks for your help so far

[CarDr]

http://blog.codemasters.com/wp-content/uploads/2019/05/Multi-Input-Device-System-for-DiRT-Rally-2-0-Master.pdf

Read 2.4 Device history on how to remove a device config save.

[lich0]

Have you tried what CarDr posted? You’ll want to calibrate the wheel and pedals again after that with the pedals connected to the wheel. I assume it should work that way.

It might event work with the pedals connected directly to the PC.

[ironside52]

Originally posted by lich0:

Have you tried what CarDr posted? You’ll want to calibrate the wheel and pedals again after that with the pedals connected to the wheel. I assume it should work that way.

It might event work with the pedals connected directly to the PC.

Yes, most helpful, thanks to everyone for the assists, much appreciated